Re: [linux-pm] [PATCH 1/2] handle wakeup event in PCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 25, 2009 at 09:58:38AM +0800, Shaohua Li wrote:
> On Tue, Aug 25, 2009 at 05:02:27AM +0800, Rafael J. Wysocki wrote:
> > On Monday 24 August 2009, Shaohua Li wrote:
> > > Add an implementation how to detect wakeup event for PCI. PCI device can
> > > invoke PME, platform or PCIe native approach can collect the event and
> > > report to OS. OS should identify exactly which device invokes PME as
> > > several devices can share PME pin.
> > > 
> > > In platform approach (ACPI in this case), some BIOS give exact device which
> > > invokes PME but others doesn't. 
> > 
> > I don't think the BIOS can reliably say which device signals PME# in the PCI
> > (non-PCIe) case, unless the PME# is routed separately from each device to the
> > chipset.  Also, two or more devices may signal PME# at the same time.
> > 
> > So, in this case we generally need to scan the entire hierarchy each time
> > we get a PME#.
> The thing isn't that simple. Some BIOS in its AML code clear PME status before
> sending notification to OS, which will make the 'scan the entire hierarchy each
> time' broken.
> 
> So my assumption here is BIOS sent notification to a specific device only when
> it makes sure the device signals PME#. Otherwise, BIOS should send notification
> to a bridge.
> 
> Or do you have better solution?
> > > In PCIe native approach, if PME source device is a pcie endpoint, the device
> > > is the exact PME source. If the device is root port or pcie-to-pci bridge,
> > > we need scan the hierarchy under the device.
> > 
> > Why do we have to scan if the source is a root port itself?
> The spec says legacy pci PME can directly route to root port, so this is similar
> with the pcie-to-pci bridge case.
> 
> > > To identify PME source, the patch does:
> > > 1. if the source is a pci device, the device is the only source for PME
> > 
> > That need not be true in the non-PCIe case IMO.
> See my first comment.
> 
> > > 2. if the source is a bridge, scan the hierarchy under the bridge. Several
> > > devices under the bridge could be the sources.
> > 
> > I think we need a function that will scan the hierarchy below a bridge
> > (that may be the root bridge in the non-PCIe case or a PCIe-to-PCI
> > bridge in the PCIe case) and if a device has PME_Status set, it will
> > (a) clear it and (b) call pm_request_resume() for the device.
> Even the PCIe device can work like a legacy PCI device to send PME and ACPI GPE
> fires when this happens. I'd like we have a general solution for both PCIe case
> and non-PCIe case.
Rafael,
how about the updated patch? I separate the wakeup event handling for ACPI and pcie.


Add an implementation how to detect wakeup event for PCI. PCI device can
invoke PME, platform or PCIe native approach can collect the event and
report to OS. OS should identify exactly which device invokes PME as
several devices can share PME pin.

In platform approach (ACPI in this case), some BIOS give exact device which
invokes PME but others doesn't. In either case, we always scan all devices
to check which one is the wakeup source. In the meantime, if the device isn't a
bridge, we trust the device is wakeup source even its PME status isn't set,
because BIOS can clear PME status before OS gets notification and we have no
reliable method to check if the device is the wakeup source.

In PCIe native approach, if PME source device is a pcie endpoint, the device
is the exact PME source. If the device is root port or pcie-to-pci bridge,
we need scan legacy devices in the hierarchy under the root port or bridge.

Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx>
---
 drivers/pci/pci-driver.c |  100 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pci.h        |    3 +
 2 files changed, 103 insertions(+)

Index: linux/drivers/pci/pci-driver.c
===================================================================
--- linux.orig/drivers/pci/pci-driver.c	2009-08-25 13:30:47.000000000 +0800
+++ linux/drivers/pci/pci-driver.c	2009-08-25 14:37:57.000000000 +0800
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/cpu.h>
+#include <linux/pm_runtime.h>
 #include "pci.h"
 
 /*
@@ -570,6 +571,105 @@ static void pci_pm_complete(struct devic
 		drv->pm->complete(dev);
 }
 
+/*
+ * pci_pm_check_wakeup_event - pdev is suspected to invoke a wakeup event
+ * @pdev: the suspected pci device
+ *
+ * Clear PME status and disable PME, return if the pci device @pdev really
+ * invokes PME
+ **/
+static bool pci_pm_check_wakeup_event(struct pci_dev *pdev)
+{
+	int pme_pos = pdev->pm_cap;
+	u16 pmcsr;
+	bool spurious_pme = false;
+
+	if (!pme_pos)
+		return false;
+
+	/* clear PME status and disable PME to avoid interrupt flood */
+	pci_read_config_word(pdev, pme_pos + PCI_PM_CTRL, &pmcsr);
+	if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
+		return false;
+	/* I see spurious PME here, just ignore it for now */
+	if (pmcsr & PCI_PM_CTRL_PME_ENABLE)
+		pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+	else
+		spurious_pme = true;
+	pmcsr |= PCI_PM_CTRL_PME_STATUS;
+	pci_write_config_word(pdev, pme_pos + PCI_PM_CTRL, pmcsr);
+
+	return !spurious_pme;
+}
+
+/*
+ * pci_pm_handle_wakeup_event_native - handle PCIe native PME event
+ * @target is suspected to invoke a wakeup event (PME)
+ * Note @target should be a PCIe device
+ */
+bool pci_pm_handle_wakeup_event_native(struct pci_dev *target)
+{
+	bool ret;
+	struct pci_dev *tmp = NULL;
+	int domain_nr, bus_start, bus_end;
+
+	BUG_ON(!target->is_pcie);
+
+	/* For PCIe PME, if the target isn't the source, do nothing */
+	ret = pci_pm_check_wakeup_event(target);
+	if (ret)
+		pm_request_resume(&target->dev);
+
+	if (!target->subordinate || (target->pcie_type != PCI_EXP_TYPE_ROOT_PORT
+		&& target->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE))
+		return ret;
+
+	/* scan legacy PCI devices under the bridge or root port */
+	domain_nr = pci_domain_nr(target->bus);
+	bus_start = target->subordinate->secondary;
+	bus_end = target->subordinate->subordinate;
+	while ((tmp = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tmp)) != NULL) {
+		if (pci_domain_nr(tmp->bus) == domain_nr &&
+		   tmp->bus->number >= bus_start &&
+		   tmp->bus->number <= bus_end) {
+			if (!tmp->is_pcie && pci_pm_check_wakeup_event(tmp)) {
+				ret = true;
+				pm_request_resume(&tmp->dev);
+			}
+		}
+	}
+	return ret;
+}
+
+/*
+ * pci_pm_handle_wakeup_event_platform - handle platform PCI wakeup event
+ * @target is suspected to invoke a wakeup event
+ */
+bool pci_pm_handle_wakeup_event_platform(struct pci_dev *target)
+{
+	bool ret = false;
+	struct pci_dev *tmp = NULL;
+
+	/*
+	 * In the platform approach (ACPI), target PME status might get cleared
+	 * by BIOS before OS receives a notification, so we haven't reliable
+	 * method to detect if target is the wakeup source, just trust it is
+	 */
+	pci_pm_check_wakeup_event(target);
+	pm_request_resume(&target->dev);
+	if (!target->subordinate)
+		ret = true;
+
+	/* scan all pci devices to find the wakeup source */
+	while ((tmp = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tmp)) != NULL) {
+		if (tmp != target && pci_pm_check_wakeup_event(tmp)) {
+			ret = true;
+			pm_request_resume(&tmp->dev);
+		}
+	}
+	return ret;
+}
+
 #ifdef CONFIG_SUSPEND
 
 static int pci_pm_suspend(struct device *dev)
Index: linux/drivers/pci/pci.h
===================================================================
--- linux.orig/drivers/pci/pci.h	2009-08-25 13:30:47.000000000 +0800
+++ linux/drivers/pci/pci.h	2009-08-25 14:30:26.000000000 +0800
@@ -83,6 +83,9 @@ static inline void pci_vpd_release(struc
 		dev->vpd->ops->release(dev);
 }
 
+extern bool pci_pm_handle_wakeup_event_native(struct pci_dev *target);
+extern bool pci_pm_handle_wakeup_event_platform(struct pci_dev *target);
+
 /* PCI /proc functions */
 #ifdef CONFIG_PROC_FS
 extern int pci_proc_attach_device(struct pci_dev *dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux