* Alex Chiang <achiang@xxxxxx>:
> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index ba6af16..ed32f67 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -2,10 +2,11 @@
> # Makefile for the PCI bus specific drivers.
> #
>
Actually...
> -obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
> +obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \
> pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
^^^^^^^^^^^
> irq.o
> obj-$(CONFIG_PROC_FS) += proc.o
> +obj-$(CONFIG_SYSFS) += slot.o
Here is v2.
From: Alex Chiang <achiang@xxxxxx>
PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS
There is no way to interact with a physical PCI slot without
sysfs, so encode the dependency and prevent this build error:
drivers/pci/slot.c: In function 'pci_hp_create_module_link':
drivers/pci/slot.c:327: error: 'module_kset' undeclared
Reported-by: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
Fix-suggested-by: Matthew Wilcox <matthew@xxxxxx>
Signed-off-by: Alex Chiang <achiang@xxxxxx>
---
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ba6af16..0be4efd 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,10 +2,11 @@
# Makefile for the PCI bus specific drivers.
#
-obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
- pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
+obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \
+ pci-driver.o search.o rom.o setup-res.o \
irq.o
obj-$(CONFIG_PROC_FS) += proc.o
+obj-$(CONFIG_SYSFS) += slot.o pci-sysfs.o
# Build PCI Express stuff if needed
obj-$(CONFIG_PCIEPORTBUS) += pcie/
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
