This patch setups disabled bridges even if buses have already been added. pci_assign_unassigned_resources is called after buses are added. pci_assign_unassigned_resources calls pci_bus_assign_resources. pci_bus_assign_resources calls pci_setup_bridge to configure BARs of bridges. Currently pci_setup_bridge returns immediately if the bus have already been added. So pci_assign_unassigned_resources can't configure BARs of bridge. The patch fixes the issue. On logical hot-add, we need to prevent the kernel from re-initializing bridges that have already been initialized. To achieve this, pci_setup_bridge returns immediately if the bridge have already been enabled. We don't need to check whether the specified bus is a root bus or not. pci_setup_bridge is not called on a root bus, because a root bus does not have a bridge. Thanks, -- Yuji Shimada Signed-off-by: Yuji Shimada <shimada-yxb@xxxxxxxxxxxxxxx> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 334285a..bfc3b5e 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -144,7 +144,7 @@ static void pci_setup_bridge(struct pci_bus *bus) struct pci_bus_region region; u32 l, bu, lu, io_upper16; - if (!pci_is_root_bus(bus) && bus->is_added) + if (atomic_read(&bridge->enable_cnt) != 0) return; dev_info(&bridge->dev, "PCI bridge, secondary bus %04x:%02x\n", -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html