On Sat, Mar 28, 2009 at 3:16 PM, Prakash Punnoor <prakash@xxxxxxxxxx> wrote: > On Samstag 28 März 2009 21:52:45 Yinghai Lu wrote: >> On Sat, Mar 28, 2009 at 6:31 AM, Prakash Punnoor <prakash@xxxxxxxxxx> wrote: >> > On Samstag 28 März 2009 13:34:44 Prakash Punnoor wrote: >> >> On Freitag 27 März 2009 00:10:01 Jesse Barnes wrote: >> >> > On Fri, 20 Mar 2009 19:29:41 -0700 >> >> > >> >> > Yinghai Lu <yinghai@xxxxxxxxxx> wrote: >> >> > > Impact: fix bug >> >> > > >> >> > > Prakash reported that his c51-mcp51 system ondie sound card doesn't >> >> > > work MSI but if he hack out the HT-MSI on mcp51, the MSI will work >> >> > > well with sound card. >> >> > > >> >> > > this patch rework the nv_msi_ht_cap_quirk() >> >> > > and will only try to avoid to enable ht_msi on device following that >> >> > > root dev, and don't touch that root dev >> >> > > >> >> > > v3: will enable c51... >> >> > > v4: will enable c51 kind of without leaf too. >> >> > > v5: update to mainline >> >> > > >> >> > > Reported-by: Prakash Punnoor <prakash@xxxxxxxxxx> >> >> > > Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx> >> >> > >> >> > Applied, thanks. Prakash if you get a chance can you try testing my >> >> > linux-next branch (or just linux-next in general tomorrow) to make >> >> > sure this is still ok for you? >> >> > >> >> > Thanks, >> >> >> >> Finally I am able to test the linux-next branch of pci tree after Jesse >> >> gave some help with git.(Is it correct that the kernel calls itself >> >> 2.6.28-rc8? I looked into quirks.c and it seems to be correctly >> >> patched.) Unfortunately it doesn't seem to work for me (and I am >> >> wondering why as the old v4 version seemed to work ontop of one of the >> >> 2.6.29-rc versions): >> >> >> >> dmesg|grep HT >> >> pci 0000:00:00.0: Found disabled HT MSI Mapping >> >> pci 0000:00:03.0: Enabling HT MSI Mapping >> >> pci 0000:00:09.0: Found disabled HT MSI Mapping >> >> pci 0000:00:0e.0: Enabling HT MSI Mapping >> >> pci 0000:00:09.0: Found disabled HT MSI Mapping >> >> pci 0000:00:0f.0: Enabling HT MSI Mapping >> >> pci 0000:00:09.0: Found disabled HT MSI Mapping >> >> pci 0000:00:10.0: Enabling HT MSI Mapping >> >> pci 0000:00:09.0: Found disabled HT MSI Mapping >> >> pci 0000:00:10.1: Enabling HT MSI Mapping >> >> >> >> Device 09.0 doesn't get enabled (good) but 00.0 also not (bad). Then my >> >> Intel HDA cannot use MSI. >> > >> > I sprinkeld a few debugging messages around in the code and looking at >> > that I don't see how the code can enable NMSI for device 00.0, but not >> > for 09.0: >> > >> > Both will exit here: >> > >> > if (host_bridge == dev && host_bridge_with_leaf(host_bridge)) >> >> where is >> 0000:00:03.0: Enabling HT MSI Mapping >> from? > > As I said this time there is a PCIe device more in my system (a realtek NIC): > I guess because of that this one appeared - or I have some different drivers > loaded? > > 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000a000-0000afff > Memory behind bridge: fdc00000-fdcfffff > Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: nVidia Corporation Device 0000 > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ > Address: 00000000fee0300c Data: 4149 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- > Mapping Address Base: 00000000fee00000 > Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Off, PwrInd On, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [100] Virtual Channel <?> > Kernel driver in use: pcieport-driver > 00: de 10 fd 02 07 04 10 00 a1 00 04 06 08 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 01 01 00 a1 a1 00 20 > 20: c0 fd c0 fd d1 fd d1 fd 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 > 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 > 50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 49 41 00 00 > 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 10 00 41 01 c0 04 00 00 10 28 00 00 11 3c 11 01 > 90: 40 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > The realtek nic: > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) > Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 25 > Region 0: I/O ports at ac00 [size=256] > Region 2: Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] > Expansion ROM at fdcc0000 [disabled] [size=128K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [48] Vital Product Data > Unknown small resource type 05 > Unknown large resource type 6c > No end tag found > Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+ > Address: 00000000fee0300c Data: 4161 > Capabilities: [60] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited > ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [84] Vendor Specific Information <?> > Capabilities: [100] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [12c] Virtual Channel <?> > Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-12-45 > Capabilities: [154] Power Budgeting <?> > Kernel driver in use: r8169 > 00: ec 10 68 81 07 04 10 00 01 00 00 02 10 00 00 00 > 10: 01 ac 00 00 00 00 00 00 04 f0 cf fd 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 02 01 00 00 ec 10 68 81 > 30: 00 00 cc fd 40 00 00 00 00 00 00 00 05 01 00 00 > 40: 01 48 c2 f7 00 00 00 00 03 50 00 00 05 df c2 f7 > 50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 61 41 00 00 > 60: 10 84 01 00 23 7f 00 00 10 58 1a 00 41 f4 03 00 > 70: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11 > 90: 08 30 00 00 a2 10 0a 00 67 50 08 00 c3 01 00 00 > a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00 > b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > ok, when you plug in the card, BIOS will enable the pcie bridge... need other way to figure out it is HT tunnel or HT end devices. YH -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
