Yinghai Lu wrote:
Eric W. Biederman wrote:
Yinghai Lu <yinghai@xxxxxxxxxx> writes:
On Fri, Feb 20, 2009 at 11:50 PM, Eric W. Biederman
<ebiederm@xxxxxxxxxxxx> wrote:
Robert Hancock <hancockrwd@xxxxxxxxx> writes:
Is there a reason why we can't just enable the HT MSI mapping for any bridge
device that has that PCI capability and is underneath an HT bridge?
The code should be under CONFIG_X86 because the rules for enabling HT MSI
mappings
are different for other architectures. But otherwise I can't think of a
reason.
move to arch/x86/pci/fixup.c?
it seems some other arch do support HT ... powerpc, mips?
The difference is that there is a magic address on x86 that all MSI
cycles are sent to. I think it is 0xfffe0000. In an msi to HT
mapping capability it is necessary to program in the address to listen
for msi packets. That is very much an arch dependent thing.
Essentially
the code for nv_msi_ht_cap_quirk could potentially be applied to all bridges
as
it is currently for NVIDIA and ALi bridges..
Sounds like it would save a fair amount of grief.
it seems there is some difference.
8132 is some kind of HT tunnel, and the bridge is acctually pci-x bridge.
mcp55 and ck804: is HT end device with several pcie bridges.
Not really they are all hypertransport to pci bridges (of some flavor).
But any hypertransport device is allowed to have a mapping capability.
In which case they can implement normal MSI interrupts instead of the
weird hypertransport ones.
for mcp55
00:00.0 is HT device
00:0b.0 00:0c.0, 00:0d.0, 00:0e.0, 00:0f.0 are pcie bridge.
current quirks will check 00:00.0 HT MSI is set, it will not set that in those bridges any more.
also 8131 has problem with HT MSI?
The 8131 does not implement the msi to hypertransport mapping
capability so it can not support MSI interrupts.
it seems there is one quirks to disable MSI for 8131.
/* Disable MSI on chipsets that are known to not support it */
static void __devinit quirk_disable_msi(struct pci_dev *dev)
{
if (dev->subordinate) {
dev_warn(&dev->dev, "MSI quirk detected; "
"subordinate MSI disabled\n");
dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
In general on x86, if a device has a MSI to hypertransport mapping
capability then we can enable it and mark that devices and all
downstream devices as supporting MSI.
looks some aggressive.
Not really.. we don't really "mark devices as supporting MSI" right now,
we generally mark them as not supporting it in certain cases and by
default assume they do. So if a quirk doesn't hit on a particular
chipset, then we go ahead and enable it. If there's some reason it
doesn't work or we don't do something that's needed to make it work, and
the driver requests it, we'll use it and it just won't work properly. So
it's not really any more aggressive than what we have now..
It seems like we have kind of a random mix of MSI quirks related to MSI
mappings:
Serverworks HT2000: check if PCIE bridge has MSI mapping enabled, if not
disable MSI on PCIE bridge subordinate bus
NVIDIA CK804: check if HT MSI mapping enabled either on root bridge or
on the PCIE bridge device, if not, disable MSI on PCIE bridge
subordinate bus
Serverworks HT1000 (and proposed AMD 8132): just switch on HT MSI
mapping on bridge device
All NVIDIA and ALi (which does appear to overlap with the CK804 one): If
bus 0 device 0 function 0 is an HT slave, enable its MSI mapping,
otherwise disable it
It seems like these could be combined into something like:
-For all buses, check if any device on the bus is an HT slave, if so,
enable its HT MSI mapping. If not, disable it. (Should we also disable
MSI on the bus if we disable it or there's no mapping capability? I
would guess we likely should..)
-For all PCI bridges other than device 0 function 0 that have HT MSI
Mapping capability, check if our bus (or an upstream one?) has a device
marked as an HT slave with enabled MSI mapping. If so, then enable the
capability, if not then disable it and disable MSI on subordinate bus.
Essentially it should make sure that the mappings are enabled all the
way up the chain, and if they can't be then we disable MSI. This could
be totally wrong though, I don't know HT that well, hopefully someone
else does :-)
There's the issue that Eric pointed out about the MSI mapping address
possibly not being set up on some platforms. However, right now we'll
just blindly try and use MSI on such setups anyway, so I don't see it's
really worsening the situation.
We would also still need the 8131 quirk, since presumably it doesn't
have HT MSI Mapping capability so we wouldn't know to disable MSI on it
from the above.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
