Re: [PATCH 2/3] PCI: Add ability to rescan PCI busses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I will definitely take some ideas from this patch and incorporate
them into mine.

* Trent Piepho <xyzzy@xxxxxxxxxxxxx>:
> This adds a bus attribute named "scan" to the PCI bus, which will
> appear in sysfs at "/sys/bus/pci/scan".  Writing to this file will
> trigger a rescan of all PCI busses.

I prefer the name "rescan".

> To do this pci_scan_single_device() is modified to first check if the
> device to be scanned is already known to Linux.  In which case it just
> returns the existing device.  The old behavior was to create a new
> device anyway that would conflict with the existing one, causing all
> manner of Bad Things to happen.
> 
> pci_scan_slot() has been rewritten to be less complex and will now
> return the number of *new* devices found.  It didn't used to work to
> call pci_scan_slot() on a previously scanned slot, so returning all
> devices found was effectivly the same as returning new devices.
> ---
>  drivers/pci/pci-driver.c |    1 +
>  drivers/pci/pci-sysfs.c  |   14 +++++++++++
>  drivers/pci/pci.h        |    6 +++++
>  drivers/pci/probe.c      |   55 +++++++++++++++++++++++++++------------------
>  4 files changed, 54 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> index 2bec651..fcfd445 100644
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -847,6 +847,7 @@ struct bus_type pci_bus_type = {
>  	.remove		= pci_device_remove,
>  	.shutdown	= pci_device_shutdown,
>  	.dev_attrs	= pci_dev_attrs,
> +	.bus_attrs	= pci_bus_attrs,

This is cleaner than my approach, so I'll use your technique.

>  	.pm		= PCI_PM_OPS_PTR,
>  };
>  
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index d422f37..0781ab7 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -266,6 +266,20 @@ struct device_attribute pci_dev_attrs[] = {
>  	__ATTR_NULL,
>  };
>  
> +#ifdef CONFIG_HOTPLUG
> +static ssize_t __ref scan(struct bus_type *type, const char *buf, size_t count)
> +{
> +	pci_rescan_busses();
> +
> +	return count;
> +}
> +
> +struct bus_attribute pci_bus_attrs[] = {
> +	__ATTR(scan, S_IWUSR, NULL, scan),
> +	__ATTR_NULL
> +};
> +#endif
> +
>  static ssize_t
>  pci_read_config(struct kobject *kobj, struct bin_attribute *bin_attr,
>  		char *buf, loff_t off, size_t count)
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 65deed8..49d7bb4 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -87,6 +87,7 @@ static inline int pci_proc_detach_bus(struct pci_bus *bus) { return 0; }
>  
>  /* Functions for PCI Hotplug drivers to use */
>  extern unsigned int pci_do_scan_bus(struct pci_bus *bus);
> +extern void pci_rescan_busses(void) __devinit;
>  
>  #ifdef HAVE_PCI_LEGACY
>  extern void pci_create_legacy_files(struct pci_bus *bus);
> @@ -128,6 +129,11 @@ extern int pcie_mch_quirk;
>  extern struct device_attribute pci_dev_attrs[];
>  extern struct device_attribute dev_attr_cpuaffinity;
>  extern struct device_attribute dev_attr_cpulistaffinity;
> +#ifdef CONFIG_HOTPLUG
> +extern struct bus_attribute pci_bus_attrs[];
> +#else
> +#define pci_bus_attrs NULL
> +#endif
>  
>  /**
>   * pci_match_one_device - Tell if a PCI device structure has a matching
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 251c2b1..6e6172d 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1006,6 +1006,13 @@ struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn)
>  {
>  	struct pci_dev *dev;
>  
> +	/* Check to see if the device is already known */
> +	dev = pci_get_slot(bus, devfn);
> +	if (dev) {
> +		pci_dev_put(dev);
> +		return dev;
> +	}
> +

Above is already a separate patch in my series.

>  	dev = pci_scan_device(bus, devfn);
>  	if (!dev)
>  		return NULL;
> @@ -1024,35 +1031,26 @@ EXPORT_SYMBOL(pci_scan_single_device);
>   * Scan a PCI slot on the specified PCI bus for devices, adding
>   * discovered devices to the @bus->devices list.  New devices
>   * will not have is_added set.
> + *
> + * Returns the number of new devices found.
>   */
>  int pci_scan_slot(struct pci_bus *bus, int devfn)
>  {
> -	int func, nr = 0;
> -	int scan_all_fns;
> -
> -	scan_all_fns = pcibios_scan_all_fns(bus, devfn);
> -
> -	for (func = 0; func < 8; func++, devfn++) {
> -		struct pci_dev *dev;
> +	int fn, nr = 0;
> +	struct pci_dev *dev;
>  
> -		dev = pci_scan_single_device(bus, devfn);
> -		if (dev) {
> +	if ((dev = pci_scan_single_device(bus, devfn)))
> +		if (!dev->is_added)	/* new device? */
>  			nr++;
>  
> -			/*
> -		 	 * If this is a single function device,
> -		 	 * don't scan past the first function.
> -		 	 */
> -			if (!dev->multifunction) {
> -				if (func > 0) {
> -					dev->multifunction = 1;
> -				} else {
> - 					break;
> -				}
> +	if ((dev && dev->multifunction) ||
> +	    (!dev && pcibios_scan_all_fns(bus, devfn))) {
> +		for (fn = 1; fn < 8; fn++) {
> +			if ((dev = pci_scan_single_device(bus, devfn + fn))) {
> +				if (!dev->is_added)
> +					nr++;
> +				dev->multifunction = 1;
>  			}
> -		} else {
> -			if (func == 0 && !scan_all_fns)
> -				break;
>  		}
>  	}

Hm, now this is interesting. I'll have to have a bit more of
a think about this to see if your approach makes more sense.

>  
> @@ -1192,11 +1190,24 @@ struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent,
>  }
>  EXPORT_SYMBOL(pci_scan_bus_parented);
>  
> +/* Does a recursive rescan of all PCI busses. */
> +void __devinit pci_rescan_busses(void)
> +{
> +	struct pci_bus *bus = NULL;
> +
> +	while ((bus = pci_find_next_bus(bus)) != NULL) {
> +		pci_scan_child_bus(bus);
> +		pci_bus_assign_resources(bus);
> +		pci_bus_add_devices(bus);
> +	}
> +}
> +

This is better than what I did too.

If it turns out that I can use the majority of the ideas in your
patch, then I'll just incorporate it into my series and attribute
it properly to you of course.

We still need a bunch of the bug fixes I have to actually allow
us to rescan the entire bus without BAR collisions or
reinitializing devices, etc.

Thanks.

/ac

>  #ifdef CONFIG_HOTPLUG
>  EXPORT_SYMBOL(pci_add_new_bus);
>  EXPORT_SYMBOL(pci_scan_slot);
>  EXPORT_SYMBOL(pci_scan_bridge);
>  EXPORT_SYMBOL_GPL(pci_scan_child_bus);
> +EXPORT_SYMBOL_GPL(pci_rescan_busses);
>  #endif
>  
>  static int __init pci_sort_bf_cmp(const struct device *d_a, const struct device *d_b)
> -- 
> 1.5.4.3
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux