Thanks much for response.
Here is the lspci and dmesg output for cold boot.
"pci_hotplug: PCI Hot Plug PCI Core version: 0.5"
1) lspci
[root@krishna-lnx-2 log]# lspci
00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c)
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c)
00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 0c)
00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c)
00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02)
00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02)
00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02)
00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02)
00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02)
00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a)
00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
01:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
02:00.0 USB Controller: NEC Corporation USB (rev 43)
02:00.1 USB Controller: NEC Corporation USB (rev 43)
02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
03:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
03:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
06:00.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
06:00.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
06:00.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)
06:01.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M (rev 64)
[root@krishna-lnx-2 log]#
2) dmesg
BIOS EBDA/lowmem at: 0009d400/0009d400
Linux version 2.6.28 (root@krishna-lnx-2) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #4 SMP Thu Jan 22 16:21:55 PST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x3ffd0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 373fe000 @ 10000-16000
RAMDISK: 37cf2000 - 37fef5f1
Allocated new RAMDISK: 00100000 - 003fd5f1
Move RAMDISK from 0000000037cf2000 - 0000000037fef5f0 to 00100000 - 003fd5f0
ACPI: RSDP 000F72E0, 0014 (r0 ACPIAM)
ACPI: RSDT 3FFD0000, 0034 (r1 A M I OEMRSDT 9000529 MSFT 97)
ACPI: FACP 3FFD0200, 0084 (r2 A M I OEMFACP 9000529 MSFT 97)
ACPI: DSDT 3FFD0450, 41EC (r1 ALGHA ALGHA025 25 INTL 2002026)
ACPI: FACS 3FFDE000, 0040
ACPI: APIC 3FFD0390, 0078 (r1 A M I OEMAPIC 9000529 MSFT 97)
ACPI: MCFG 3FFD0410, 003C (r1 A M I OEMMCFG 9000529 MSFT 97)
ACPI: OEMB 3FFDE040, 0046 (r1 A M I AMI_OEM 9000529 MSFT 97)
ACPI: Local APIC address 0xfee00000
139MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 00000000 - 373fe000
bootmap 00012000 - 00018e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 00008aa1e0] TEXT DATA BSS ==> [0000400000 - 00008aa1e0]
#4 [00008ab000 - 00008af000] INIT_PG_TABLE ==> [00008ab000 - 00008af000]
#5 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000100000 - 00003fd5f1] NEW RAMDISK ==> [0000100000 - 00003fd5f1]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0003ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0003ffd0
On node 0 totalpages: 261981
free_area_init_node: node 0, pgdat c0765980, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 280 pages used for memmap
HighMem zone: 35514 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259933
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet scsi_mod.sync=scan
Unknown boot option `scsi_mod.sync=scan': ignoring
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c081b000 soft=c07fb000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1833.246 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030548k/1048384k available (2343k kernel code, 17100k reserved, 1367k data, 328k init, 143176k highmem)
virtual kernel memory layout:
fixmap : 0xffc58000 - 0xfffff000 (3740 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc07a6000 - 0xc07f8000 ( 328 kB)
.data : 0xc0649f06 - 0xc079fb5c (1367 kB)
.text : 0xc0400000 - 0xc0649f06 (2343 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.49 BogoMIPS (lpj=1833246)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Dual Pentium(R) M CPU 000 @ 1.83GHz stepping 04
CPU 1 irqstacks, hard=c081c000 soft=c07fc000
Booting processor 1 APIC 0x6 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3666.17 BogoMIPS (lpj=1833086)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Dual Pentium(R) M CPU 000 @ 1.83GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
CPU 2 irqstacks, hard=c081d000 soft=c07fd000
Booting processor 2 APIC 0x1 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3666.16 BogoMIPS (lpj=1833083)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Dual Pentium(R) M CPU 000 @ 1.83GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
CPU 3 irqstacks, hard=c081e000 soft=c07fe000
Booting processor 3 APIC 0x7 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3666.16 BogoMIPS (lpj=1833084)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Dual Pentium(R) M CPU 000 @ 1.83GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (14664.99 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 0 2
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU1 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 1 3
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU2 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 2 0
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU3 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 3 1
domain 1: span 0-3 level CPU
groups: 1,3 0,2
khelper used greatest stack depth: 3220 bytes left
net_namespace: 672 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
khelper used greatest stack depth: 3196 bytes left
PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support.
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Scanning bus 0000:00
pci 0000:00:00.0: found [8086:3590] class 000600 header type 00
pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:02.0: found [8086:3595] class 000604 header type 01
pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: found [8086:3597] class 000604 header type 01
pci 0000:00:04.0: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: found [8086:3599] class 000604 header type 01
pci 0000:00:06.0: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:1c.0: found [8086:25ae] class 000604 header type 01
pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1d.0: found [8086:25a9] class 000c03 header type 00
pci 0000:00:1d.0: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1d.1: found [8086:25aa] class 000c03 header type 00
pci 0000:00:1d.1: reg 20 io port: [0xec00-0xec1f]
pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1d.4: found [8086:25ab] class 000880 header type 00
pci 0000:00:1d.4: reg 10 32bit mmio: [0xfebff800-0xfebff80f]
pci 0000:00:1d.4: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1d.5: found [8086:25ac] class 000800 header type 00
pci 0000:00:1d.5: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1d.7: found [8086:25ad] class 000c03 header type 00
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: found [8086:244e] class 000604 header type 01
pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1f.0: found [8086:25a1] class 000601 header type 00
pci 0000:00:1f.0: calling old_ich_force_enable_hpet_user+0x0/0x13
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:1f.0: calling quirk_ich4_lpc_acpi+0x0/0x5f
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1f.1: found [8086:25a2] class 000101 header type 00
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1f.2: found [8086:25a3] class 000101 header type 00
pci 0000:00:1f.2: reg 10 io port: [0xe400-0xe407]
pci 0000:00:1f.2: reg 14 io port: [0xe000-0xe003]
pci 0000:00:1f.2: reg 18 io port: [0xdc00-0xdc07]
pci 0000:00:1f.2: reg 1c io port: [0xd800-0xd803]
pci 0000:00:1f.2: reg 20 io port: [0xd400-0xd40f]
pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:00:1f.3: found [8086:25a4] class 000c05 header type 00
pci 0000:00:1f.3: reg 20 io port: [0x540-0x55f]
pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x27
PCI: Fixups for bus 0000:00
pci 0000:00:02.0: scanning behind bridge, config 020100, pass 0
PCI: Scanning bus 0000:01
pci 0000:01:00.0: found [10b5:8112] class 000604 header type 01
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: PME# supported from D0 D1 D3hot
pci 0000:01:00.0: PME# disabled
PCI: Fixups for bus 0000:01
pci 0000:00:02.0: bridge 32bit mmio: [0xfc700000-0xfc7fffff]
pci 0000:01:00.0: scanning behind bridge, config 020201, pass 0
PCI: Scanning bus 0000:02
pci 0000:02:00.0: found [1033:0035] class 000c03 header type 00
pci 0000:02:00.0: reg 10 32bit mmio: [0xfc7fd000-0xfc7fdfff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: found [1033:0035] class 000c03 header type 00
pci 0000:02:00.1: reg 10 32bit mmio: [0xfc7fe000-0xfc7fefff]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.1: PME# disabled
pci 0000:02:00.2: found [1033:00e0] class 000c03 header type 00
pci 0000:02:00.2: reg 10 32bit mmio: [0xfc7ffc00-0xfc7ffcff]
pci 0000:02:00.2: supports D1 D2
pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.2: PME# disabled
PCI: Fixups for bus 0000:02
pci 0000:01:00.0: bridge 32bit mmio: [0xfc700000-0xfc7fffff]
PCI: Bus scan for 0000:02 returning with max=02
pci 0000:01:00.0: scanning behind bridge, config 020201, pass 1
PCI: Bus scan for 0000:01 returning with max=02
pci 0000:00:04.0: scanning behind bridge, config 030300, pass 0
PCI: Scanning bus 0000:03
pci 0000:03:00.0: found [8086:105e] class 000200 header type 00
pci 0000:03:00.0: reg 10 32bit mmio: [0xfc980000-0xfc99ffff]
pci 0000:03:00.0: reg 14 32bit mmio: [0xfc960000-0xfc97ffff]
pci 0000:03:00.0: reg 18 io port: [0xb800-0xb81f]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfc940000-0xfc95ffff]
pci 0000:03:00.0: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: found [8086:105e] class 000200 header type 00
pci 0000:03:00.1: reg 10 32bit mmio: [0xfc9e0000-0xfc9fffff]
pci 0000:03:00.1: reg 14 32bit mmio: [0xfc9c0000-0xfc9dffff]
pci 0000:03:00.1: reg 18 io port: [0xbc00-0xbc1f]
pci 0000:03:00.1: reg 30 32bit mmio: [0xfc9a0000-0xfc9bffff]
pci 0000:03:00.1: calling pci_fixup_transparent_bridge+0x0/0x27
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: PME# disabled
PCI: Fixups for bus 0000:03
pci 0000:00:04.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:04.0: bridge 32bit mmio: [0xfc800000-0xfc9fffff]
PCI: Bus scan for 0000:03 returning with max=03
pci 0000:00:06.0: scanning behind bridge, config 040400, pass 0
PCI: Scanning bus 0000:04
PCI: Fixups for bus 0000:04
PCI: Bus scan for 0000:04 returning with max=04
pci 0000:00:1c.0: scanning behind bridge, config 050500, pass 0
PCI: Scanning bus 0000:05
PCI: Fixups for bus 0000:05
PCI: Bus scan for 0000:05 returning with max=05
pci 0000:00:1e.0: scanning behind bridge, config 060600, pass 0
PCI: Scanning bus 0000:06
pci 0000:06:00.0: found [1106:3038] class 000c03 header type 00
pci 0000:06:00.0: reg 20 io port: [0xc400-0xc41f]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.1: found [1106:3038] class 000c03 header type 00
pci 0000:06:00.1: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:06:00.1: supports D1 D2
pci 0000:06:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.1: PME# disabled
pci 0000:06:00.2: found [1106:3104] class 000c03 header type 00
pci 0000:06:00.2: reg 10 32bit mmio: [0xfeafec00-0xfeafecff]
pci 0000:06:00.2: supports D1 D2
pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.2: PME# disabled
pci 0000:06:01.0: found [1002:4c52] class 000300 header type 00
pci 0000:06:01.0: calling quirk_no_ata_d3+0x0/0x18
pci 0000:06:01.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:06:01.0: reg 14 io port: [0xc800-0xc8ff]
pci 0000:06:01.0: reg 18 32bit mmio: [0xfeaff000-0xfeafffff]
pci 0000:06:01.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
pci 0000:06:01.0: supports D1 D2
PCI: Fixups for bus 0000:06
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfca00000-0xfeafffff]
PCI: Bus scan for 0000:06 returning with max=06
pci 0000:00:02.0: scanning behind bridge, config 020100, pass 1
pci 0000:00:04.0: scanning behind bridge, config 030300, pass 1
pci 0000:00:06.0: scanning behind bridge, config 040400, pass 1
pci 0000:00:1c.0: scanning behind bridge, config 050500, pass 1
pci 0000:00:1e.0: scanning behind bridge, config 060600, pass 1
PCI: Bus scan for 0000:00 returning with max=06
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPC0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *7)
ACPI: PCI Interrupt Link [LNKB] (IRQs *7)
ACPI: PCI Interrupt Link [LNKC] (IRQs *7)
ACPI: PCI Interrupt Link [LNKD] (IRQs *7)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - C6, should be BE [20080926]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x400-0x47f has been reserved
system 00:06: ioport range 0x500-0x53f has been reserved
system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:06: iomem range 0xfec10400-0xfec1ffff could not be reserved
system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xfec10000-0xfec103ff has been reserved
system 00:0e: ioport range 0xa00-0xa3f has been reserved
system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0xc0000-0xcffff could not be reserved
system 00:10: iomem range 0xe0000-0xfffff could not be reserved
system 00:10: iomem range 0x100000-0x3fffffff could not be reserved
pci 0000:00:1f.1: BAR 5: got res [0x50100000-0x501003ff] bus [0x50100000-0x501003ff] flags 0x20200
pci 0000:00:1f.1: BAR 5: moved to bus [0x50100000-0x501003ff] flags 0x20200
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0: IO window: disabled
pci 0000:01:00.0: MEM window: 0xfc700000-0xfc7fffff
pci 0000:01:00.0: PREFETCH window: disabled
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: disabled
pci 0000:00:02.0: MEM window: 0xfc700000-0xfc7fffff
pci 0000:00:02.0: PREFETCH window: disabled
pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
pci 0000:00:04.0: IO window: 0xb000-0xbfff
pci 0000:00:04.0: MEM window: 0xfc800000-0xfc9fffff
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:06.0: PCI bridge, secondary bus 0000:04
pci 0000:00:06.0: IO window: disabled
pci 0000:00:06.0: MEM window: disabled
pci 0000:00:06.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:06:01.0: BAR 6: got res [0x50000000-0x5001ffff] bus [0x50000000-0x5001ffff] flags 0x27200
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: 0xc000-0xcfff
pci 0000:00:1e.0: MEM window: 0xfca00000-0xfeafffff
pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x000000500fffff
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 mmio: [0x0-0x0]
bus: 01 index 1 mmio: [0xfc700000-0xfc7fffff]
bus: 01 index 2 mmio: [0x0-0x0]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0xfc700000-0xfc7fffff]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xb000-0xbfff]
bus: 03 index 1 mmio: [0xfc800000-0xfc9fffff]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 mmio: [0x0-0x0]
bus: 04 index 1 mmio: [0x0-0x0]
bus: 04 index 2 mmio: [0x0-0x0]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 mmio: [0x0-0x0]
bus: 05 index 1 mmio: [0x0-0x0]
bus: 05 index 2 mmio: [0x0-0x0]
bus: 05 index 3 mmio: [0x0-0x0]
bus: 06 index 0 io port: [0xc000-0xcfff]
bus: 06 index 1 mmio: [0xfca00000-0xfeafffff]
bus: 06 index 2 mmio: [0x50000000-0x500fffff]
bus: 06 index 3 io port: [0x00-0xffff]
bus: 06 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3061k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1232816636.574:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1739
SELinux: Registering netfilter hooks
cryptomgr_test used greatest stack depth: 3068 bytes left
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: calling quirk_intel_irqbalance+0x0/0xc8
pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:00.0: calling quirk_pcie_mch+0x0/0xb
pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:00.0: calling pci_fixup_video+0x0/0x91
pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:02.0: calling pci_fixup_video+0x0/0x91
pci 0000:00:02.0: calling pcie_rootport_aspm_quirk+0x0/0x9b
pci 0000:00:04.0: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:04.0: calling pci_fixup_video+0x0/0x91
pci 0000:00:04.0: calling pcie_rootport_aspm_quirk+0x0/0x9b
pci 0000:00:06.0: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:06.0: calling pci_fixup_video+0x0/0x91
pci 0000:00:06.0: calling pcie_rootport_aspm_quirk+0x0/0x9b
pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1c.0: calling pci_fixup_video+0x0/0x91
pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1d.0: calling pci_fixup_video+0x0/0x91
pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1d.1: calling pci_fixup_video+0x0/0x91
pci 0000:00:1d.4: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1d.4: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1d.4: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1d.4: calling pci_fixup_video+0x0/0x91
pci 0000:00:1d.5: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1d.5: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1d.5: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1d.5: calling pci_fixup_video+0x0/0x91
pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1d.7: calling pci_fixup_video+0x0/0x91
pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1e.0: calling pci_fixup_video+0x0/0x91
pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1f.0: calling pci_fixup_video+0x0/0x91
pci 0000:00:1f.1: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1f.1: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1f.1: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1f.1: calling pci_fixup_video+0x0/0x91
pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1f.2: calling pci_fixup_video+0x0/0x91
pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x159
pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:00:1f.3: calling pci_fixup_video+0x0/0x91
pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:01:00.0: calling pci_fixup_video+0x0/0x91
pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:02:00.0: calling pci_fixup_video+0x0/0x91
pci 0000:02:00.1: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:02:00.1: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:02:00.1: calling pci_fixup_video+0x0/0x91
pci 0000:02:00.2: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:02:00.2: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:02:00.2: calling pci_fixup_video+0x0/0x91
pci 0000:03:00.0: calling quirk_e100_interrupt+0x0/0x159
pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:03:00.0: calling pci_fixup_video+0x0/0x91
pci 0000:03:00.1: calling quirk_e100_interrupt+0x0/0x159
pci 0000:03:00.1: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:03:00.1: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:03:00.1: calling pci_fixup_video+0x0/0x91
pci 0000:06:00.0: calling via_no_dac+0x0/0x2c
pci 0000:06:00.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:06:00.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:06:00.0: calling pci_fixup_video+0x0/0x91
pci 0000:06:00.1: calling via_no_dac+0x0/0x2c
pci 0000:06:00.1: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:06:00.1: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:06:00.1: calling pci_fixup_video+0x0/0x91
pci 0000:06:00.2: calling via_no_dac+0x0/0x2c
pci 0000:06:00.2: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:06:00.2: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:06:00.2: calling pci_fixup_video+0x0/0x91
pci 0000:06:01.0: calling quirk_cardbus_legacy+0x0/0x1d
pci 0000:06:01.0: calling quirk_usb_early_handoff+0x0/0x384
pci 0000:06:01.0: calling pci_fixup_video+0x0/0x91
pci 0000:06:01.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie01: allocate port service
pcieport-driver 0000:00:04.0: setting latency timer to 64
pci_express 0000:00:04.0:pcie00: allocate port service
pci_express 0000:00:04.0:pcie01: allocate port service
pcieport-driver 0000:00:06.0: setting latency timer to 64
pci_express 0000:00:06.0:pcie00: allocate port service
pci_express 0000:00:06.0:pcie01: allocate port service
aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:06.0:pcie01: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
fakephp: Fake PCI Hot Plug Controller Driver
pci_create_slot: created pci_slot on 0000:00:00
pci_create_slot: created pci_slot on 0000:00:02
pci_create_slot: created pci_slot on 0000:00:04
pci_create_slot: created pci_slot on 0000:00:06
pci_create_slot: created pci_slot on 0000:00:1c
pci_create_slot: created pci_slot on 0000:00:1d
pci_create_slot: created pci_slot on 0000:00:1e
pci_create_slot: created pci_slot on 0000:00:1f
pci_create_slot: created pci_slot on 0000:01:00
pci_create_slot: created pci_slot on 0000:02:00
pci_create_slot: created pci_slot on 0000:03:00
pci_create_slot: created pci_slot on 0000:06:00
pci_create_slot: created pci_slot on 0000:06:01
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU1] (supports 8 throttling states)
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU2] (supports 8 throttling states)
processor ACPI_CPU:02: registered as cooling_device2
ACPI: Processor [CPU3] (supports 8 throttling states)
processor ACPI_CPU:03: registered as cooling_device3
ACPI: Processor [CPU4] (supports 8 throttling states)
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x25a2 rev 0x02)
pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07
ide1: BM-DMA at 0xfc08-0xfc0f
Probing IDE interface ide0...
hdb: CD-ROM F565E, ATAPI CD/DVD-ROM drive
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: host side 80-wire cable detection failed, limiting max speed to UDMA33
hdb: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 328k freed
Write protecting the kernel text: 2344k
Write protecting the kernel read-only data: 952k
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:02:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:02:00.2: EHCI Host Controller
ehci_hcd 0000:02:00.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:02:00.2: irq 18, io mem 0xfc7ffc00
ehci_hcd 0000:02:00.2: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:06:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:06:00.2: calling quirk_via_vlink+0x0/0xae
ehci_hcd 0000:06:00.2: EHCI Host Controller
ehci_hcd 0000:06:00.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:06:00.2: irq 18, io mem 0xfeafec00
ehci_hcd 0000:06:00.2: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
insmod used greatest stack depth: 2372 bytes left
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:02:00.0: OHCI Host Controller
ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:02:00.0: irq 16, io mem 0xfc7fd000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:02:00.1: OHCI Host Controller
ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:02:00.1: irq 17, io mem 0xfc7fe000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
insmod used greatest stack depth: 2364 bytes left
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ec00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:06:00.0: calling quirk_via_vlink+0x0/0xae
uhci_hcd 0000:06:00.0: UHCI Host Controller
uhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:06:00.0: irq 16, io base 0x0000c400
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:06:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:06:00.1: calling quirk_via_vlink+0x0/0xae
uhci_hcd 0000:06:00.1: UHCI Host Controller
uhci_hcd 0000:06:00.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:06:00.1: irq 17, io base 0x0000cc00
usb usb9: configuration #1 chosen from 1 choice
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd400 irq 18
ata2: SATA max UDMA/133 cmd 0xdc00 ctl 0xd800 bmdma 0xd408 irq 18
usb 3-2: new high speed USB device using ehci_hcd and address 2
ata1.00: ATA-6: WDC WD800JD-00JNA0, 05.01C05, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA
ata1.00: configured for UDMA/133
usb 3-2: configuration #1 chosen from 1 choice
input: ImExPS/2 Logitech Wheel Mouse as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-00JN 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
insmod used greatest stack depth: 1788 bytes left
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1232816642.638:2): selinux=0 auid=4294967295 ses=4294967295
EDAC MC: Ver: 2.1.0 Jan 13 2009
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
Intel 82802 RNG detected
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
input: PC Speaker as /class/input/input2
pcikk: module license 'unspecified' taints kernel.
Krishna network_driver_init(void)
i6300ESB timer: initialized (0xf7d24800). heartbeat=30 sec (nowayout=0)
KrishnaPCIe network_driver_init(void)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:03:00.0: setting latency timer to 64
e1000e 0000:03:00.0: irq 1279 for MSI/MSI-X
ide-cd driver 5.00
ide-cd: hdb: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
0000:03:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:15:17:00:16:96
0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:03:00.0: eth0: MAC: 0, PHY: 4, PBA No: d33923-002
e1000e 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:03:00.1: setting latency timer to 64
e1000e 0000:03:00.1: irq 1278 for MSI/MSI-X
0000:03:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:15:17:00:16:97
0000:03:00.1: eth1: Intel(R) PRO/1000 Network Connection
0000:03:00.1: eth1: MAC: 0, PHY: 4, PBA No: d33923-002
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 3966976 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 3966976 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k
platform microcode: firmware: requesting intel-ucode/06-0e-04
platform microcode: firmware: requesting intel-ucode/06-0e-04
platform microcode: firmware: requesting intel-ucode/06-0e-04
platform microcode: firmware: requesting intel-ucode/06-0e-04
Microcode Update Driver: v2.00 , Peter Oruba
Microcode Update Driver: v2.00 removed.
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
e1000e 0000:03:00.0: irq 1279 for MSI/MSI-X
e1000e 0000:03:00.0: irq 1279 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e 0000:03:00.1: irq 1278 for MSI/MSI-X
e1000e 0000:03:00.1: irq 1278 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
0000:03:00.1: eth1: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
eth1: no IPv6 routers present
----------------------------------------
> Date: Sat, 24 Jan 2009 03:44:05 -0700
> From: matthew@xxxxxx
> To: krishna_sunitha@xxxxxxxxxxx
> CC: linux-pci@xxxxxxxxxxxxxxx
> Subject: Re: hotplug of PCI card -- hangs box or throws error message
>
> On Sat, Jan 24, 2009 at 12:16:05AM -0500, Krishna Kothapalli wrote:
>> 2) The coldplug of the device is good. Linux detects it as follows:
>>
>> #lspci
>> ...
>> 05:00.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
>> 05:00.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
>> 05:00.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)
>> ...
>
> I wish you hadn't trimmed the lspci output. The PCI bridge which
> bridges to the 05 bus is relevant to diagnosing this problem.
>
> Also, which PCI hotplug driver are you using? You also snipped out the
> bits of dmesg that would have told us that.
>
> --
> Matthew Wilcox Intel Open Source Technology Centre
> "Bill, look, we understand that you're interested in selling us this
> operating system, but compare it to ours. We can't possibly take such
> a retrograde step."
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_________________________________________________________________
Windows Live™: E-mail. Chat. Share. Get more ways to connect.
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_allup_howitworks_012009--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
