Re: [linux-pm] [PATCH] PCI PM: Restore standard config registers of all devices early (was: Re: EeePC resume failure - timers)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, 20 Jan 2009, Jesse Barnes wrote:
>
> On Monday, January 19, 2009 8:56 pm Linus Torvalds wrote:
> > On Mon, 19 Jan 2009, Jesse Barnes wrote:
> > > Is i915 loaded?  Hopefully you can suspend/resume in text mode using its
> > > suspend/resume code w/o using the s3_bios stuff?
> >
> > You're right, that works fine. So text-mode suspends and (immediately)
> > resumes without any issues, multiple times. But X doesn't. The second
> > resume will just hang when X re-initializes (sometimes I see the cursor,
> > so I know X actually started up)
> 
> Getting register dumps before and after resume (and also preferably before and 
> after X VT switches) might help us figure out what's going on (sounds like 
> the driver's VT enter routine is broken somehow)...

So just looking at the Xorg.0.log after rebooting, I can tell that the 
failure looks to be around the time when we do the DRI mapping. A 
successful suspend-resume cycle will look like:

	...
	(WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled
	(WW) intel(0): Existing errors found in hardware state.
	(II) intel(0): using SSC reference clock of 100 MHz
	(II) intel(0): Selecting standard 18 bit TMDS pixel format.
	(II) intel(0): Output configuration:
	(II) intel(0):   Pipe A is off
	(II) intel(0):   Display plane A is now disabled and connected to pipe A.
	(II) intel(0):   Pipe B is on
	(II) intel(0):   Display plane B is now enabled and connected to pipe B.
	(II) intel(0):   Output VGA is connected to pipe none
	(II) intel(0):   Output LVDS is connected to pipe B
	(II) intel(0): [drm] mapped front buffer at 0xd1000000, handle = 0xd1000000
	(II) intel(0): [drm] mapped back buffer at 0xd0c00000, handle = 0xd0c00000
	(II) intel(0): [drm] mapped depth buffer at 0xd0800000, handle = 0xd0800000
	(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
	...

and an unsuccessful one will always get stuck before it logs that "[drm] 
mapped front buffer" thing, but after doing the "Output LVDS is connected 
to pipe B".  I checked a couple of times - the log always ended at that 
same place.

No interesting kernel logs survive this thing (and it's obviously in 
graphics mode, so I can't see any oops if any), so I can't tell what 
happens. But it looks DRI-related.

And btw, I was wrong - it's not always on the second suspend. It's 
happened on the first suspends too. 

			Linus
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux