Hi! > Subject: PCI PM: Avoid touching devices behind bridges in unknown state (rev. 2) > From: Rafael J. Wysocki <rjw@xxxxxxx> > > It generally is better to avoid accessing devices behind bridges that > may not be in the D0 power state, because in that case the bridges' > secondary buses may not be accessible. For this reason, during the > early phase of resume (ie. with interrupts disabled), before > restoring the standard config registers of a device, check the power > state of the bridge the device is behind and postpone the restoration > of the device's config space, as well as any other operations that > would involve accessing the device, if that state is not D0. I'm not sure if this is good idea. Either pci config space needs to be restored early, or it can wait. Sometimes restoring it early and sometimes restoring it late seems harmful: it will make code harder to understand and harder to test. > In such cases the restoration of the device's config space will be > retried during the "normal" phase of resume (ie. with interrupts > enabled), so that the bridge can be put into D0 before that happens. If drivers have to assume it is restored late, anyway... why not do it late, always? -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
