RE: [PATCH 0/13 v7] PCI: Linux kernel SR-IOV support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As noted in the attached email to the netdev list, we (e1000_devel) will support the API.

- Greg Rose

-----Original Message-----
From: kvm-owner@xxxxxxxxxxxxxxx [mailto:kvm-owner@xxxxxxxxxxxxxxx] On Behalf Of Greg KH
Sent: Tuesday, December 16, 2008 10:06 PM
To: Jike Song
Cc: Jesse Barnes; Zhao, Yu; linux-pci@xxxxxxxxxxxxxxx; achiang@xxxxxx; bjorn.helgaas@xxxxxx; grundler@xxxxxxxxxxxxxxxx; mingo@xxxxxxx; matthew@xxxxxx; randy.dunlap@xxxxxxxxxx; rdreier@xxxxxxxxx; horms@xxxxxxxxxxxx; yinghai@xxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; kvm@xxxxxxxxxxxxxxx; virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
Subject: Re: [PATCH 0/13 v7] PCI: Linux kernel SR-IOV support

On Wed, Dec 17, 2008 at 10:37:54AM +0800, Jike Song wrote:
> Jesse Barnes wrote:
> > Given a respin of 10-13 I think it's reasonable to merge this into 2.6.29, but 
> > I'd be much happier about it if we got some driver code along with it, so as 
> > not to have an unused interface sitting around for who knows how many 
> > releases.  Is that reasonable?  Do you know if any of the corresponding PF/VF 
> > driver bits are ready yet?
> 
> Hi Jesse, 
> 
> Yu Zhao has posted a patch set with subject "SR-IOV driver example" 
> at November 26, which illustrated the usage of SR-IOV API in Intel 82576 VF/PF
> drivers;-)

Yes, but that driver was soundly rejected by the network driver
maintainers, so I wouldn't go around showing that as your primary
example of how to use this interface :)

The point is valid, I don't think these apis should go into the tree
without a driver or some other code using them.  Otherwise they make no
sense at all to have in-tree.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
--- Begin Message ---
On Tue, Dec 2, 2008 at 1:27 AM, Yu Zhao <yu.zhao@xxxxxxxxx> wrote:
> SR-IOV drivers of Intel 82576 NIC are available. There are two parts
> of the drivers: Physical Function driver and Virtual Function driver.
> The PF driver is based on the IGB driver and is used to control PF to
> allocate hardware specific resources and interface with the SR-IOV core.
> The VF driver is a new NIC driver that is same as the traditional PCI
> device driver. It works in both the host and the guest (Xen and KVM)
> environment.
>
> These two drivers are testing versions and they are *only* intended to
> show how to use SR-IOV API.
>
> Intel 82576 NIC specification can be found at:
> http://download.intel.com/design/network/datashts/82576_Datasheet_v2p1.pdf
>
> [SR-IOV driver example 0/3 resend] introduction
> [SR-IOV driver example 1/3 resend] PF driver: hardware specific operations
> [SR-IOV driver example 2/3 resend] PF driver: integrate with SR-IOV core
> [SR-IOV driver example 3/3 resend] VF driver: an independent PCI NIC driver
> --
>

First of all, we (e1000-devel) do support the SR-IOV API.

With that said, NAK on the driver changes.  We were not involved in
these changes and are currently working on a version of the drivers
that will make them acceptable for kernel inclusion.

--
Cheers,
Jeff

--- End Message ---

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux