On Wed, Oct 29, 2008 at 08:09:03PM +0000, Matthew Garrett wrote:
> Various pieces of hardware (such as the Acer Aspire One and Asus EEE)
> use PCIE hotplug to change the state of devices in response to events
> such as the removal of SD cards or disabling the wireless radio.
> However, they do not provide firmware support for this. As a consequence
> pciehp will refuse to load and various things break.
>
> The existing workaround has been to use the pciehp_force option. This is
> undesirable as there is little guarantee that manipulating the power
> file in the slot directory will actually result in anything happening,
> leading to potential user confusion and hardware damage. This patch adds
> a new option, pciehp_passive. In this configuration pciehp will listen
> for events and notify the PCI core appropriately. However, it will not
> provide any user controllable sysfs attributes and so the risk of
> confusion or damage is averted. Any system slots that do have firmware
> support will continue to provide full functionality.
>
> Signed-off-by: Matthew Garrett <mjg@xxxxxxxxxx>
Can you add something to Documentation/ for this new option?
Either kernel-parameters.txt or something in PCI/ seems appropriate.
Just cutting/pasting the above would be good enough for me.
thanks,
grant
>
> ---
>
> diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
> index 4b23bc3..b878432 100644
> --- a/drivers/pci/hotplug/pciehp_core.c
> +++ b/drivers/pci/hotplug/pciehp_core.c
> @@ -41,6 +41,7 @@ int pciehp_debug;
> int pciehp_poll_mode;
> int pciehp_poll_time;
> int pciehp_force;
> +int pciehp_passive;
> struct workqueue_struct *pciehp_wq;
>
> #define DRIVER_VERSION "0.4"
> @@ -55,10 +56,12 @@ module_param(pciehp_debug, bool, 0644);
> module_param(pciehp_poll_mode, bool, 0644);
> module_param(pciehp_poll_time, int, 0644);
> module_param(pciehp_force, bool, 0644);
> +module_param(pciehp_passive, bool, 0644);
> MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
> MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
> MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
> MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing");
> +MODULE_PARM_DESC(pciehp_passive, "Listen for pciehp events, even if _OSC and OSHP are missing");
>
> #define PCIE_MODULE_NAME "pciehp"
>
> @@ -85,6 +88,13 @@ static struct hotplug_slot_ops pciehp_hotplug_slot_ops = {
> .get_cur_bus_speed = get_cur_bus_speed,
> };
>
> +static struct hotplug_slot_ops pciehp_passive_hotplug_slot_ops = {
> + .owner = THIS_MODULE,
> + .get_adapter_status = get_adapter_status,
> + .get_max_bus_speed = get_max_bus_speed,
> + .get_cur_bus_speed = get_cur_bus_speed,
> +};
> +
> /*
> * Check the status of the Electro Mechanical Interlock (EMI)
> */
> @@ -212,7 +222,11 @@ static int init_slots(struct controller *ctrl)
> hotplug_slot->info = info;
> hotplug_slot->private = slot;
> hotplug_slot->release = &release_slot;
> - hotplug_slot->ops = &pciehp_hotplug_slot_ops;
> + if (pciehp_passive &&
> + pciehp_get_hp_hw_control_from_firmware(ctrl->pci_dev))
> + hotplug_slot->ops = &pciehp_passive_hotplug_slot_ops;
> + else
> + hotplug_slot->ops = &pciehp_hotplug_slot_ops;
> slot->hotplug_slot = hotplug_slot;
> snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
>
> @@ -407,7 +421,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
> u8 value;
> struct pci_dev *pdev = dev->port;
>
> - if (pciehp_force)
> + if (pciehp_force || pciehp_passive)
> dev_info(&dev->device,
> "Bypassing BIOS check for pciehp use on %s\n",
> pci_name(pdev));
> @@ -435,7 +449,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
> t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
>
> t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
> - if (value && pciehp_force) {
> + if (value && (pciehp_force || pciehp_passive)) {
> rc = pciehp_enable_slot(t_slot);
> if (rc) /* -ENODEV: shouldn't happen, but deal with it */
> value = 0;
> @@ -474,7 +488,7 @@ static int pciehp_suspend (struct pcie_device *dev, pm_message_t state)
> static int pciehp_resume (struct pcie_device *dev)
> {
> dev_info(&dev->device, "%s ENTRY\n", __func__);
> - if (pciehp_force) {
> + if (pciehp_force || pciehp_passive) {
> struct controller *ctrl = get_service_data(dev);
> struct slot *t_slot;
> u8 status;
>
> --
> Matthew Garrett | mjg59@xxxxxxxxxxxxx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
