* Zhao, Yu <yu.zhao@xxxxxxxxx>:
> +/**
> + * pci_iov_init - initialize device's SR-IOV capability
> + * @dev: the PCI device
> + *
> + * Returns 0 on success, or negative on failure.
> + *
> + * The major differences between Virtual Function and PCI device are:
> + * 1) the device with multiple bus numbers uses internal routing, so
> + * there is no explicit bridge device in this case.
> + * 2) Virtual Function memory spaces are designated by BARs encapsulated
> + * in the capability structure, and the BARs in Virtual Function PCI
> + * configuration space are read-only zero.
> + */
> +int pci_iov_init(struct pci_dev *dev)
> +{
> + int i;
> + int pos;
> + u32 pgsz;
> + u16 ctrl, total, initial, offset, stride;
> + struct pci_iov *iov;
> + struct resource *res;
> +
> + if (!dev->is_pcie || (dev->pcie_type != PCI_EXP_TYPE_RC_END &&
> + dev->pcie_type != PCI_EXP_TYPE_ENDPOINT))
> + return -ENODEV;
> +
> + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_IOV);
> + if (!pos)
> + return -ENODEV;
> +
> + ctrl = pci_ari_enabled(dev) ? PCI_IOV_CTRL_ARI : 0;
> + pci_write_config_word(dev, pos + PCI_IOV_CTRL, ctrl);
> + ssleep(1);
> +
> + pci_read_config_word(dev, pos + PCI_IOV_TOTAL_VF, &total);
> + pci_read_config_word(dev, pos + PCI_IOV_INITIAL_VF, &initial);
> + pci_write_config_word(dev, pos + PCI_IOV_NUM_VF, initial);
> + pci_read_config_word(dev, pos + PCI_IOV_VF_OFFSET, &offset);
> + pci_read_config_word(dev, pos + PCI_IOV_VF_STRIDE, &stride);
> + if (!total || initial > total || (initial && !offset) ||
> + (initial > 1 && !stride))
> + return -EIO;
> +
> + pci_read_config_dword(dev, pos + PCI_IOV_SUP_PGSIZE, &pgsz);
> + i = PAGE_SHIFT > 12 ? PAGE_SHIFT - 12 : 0;
> + pgsz &= ~((1 << i) - 1);
> + if (!pgsz)
> + return -EIO;
> +
> + pgsz &= ~(pgsz - 1);
> + pci_write_config_dword(dev, pos + PCI_IOV_SYS_PGSIZE, pgsz);
> +
> + iov = kzalloc(sizeof(*iov), GFP_KERNEL);
> + if (!iov)
> + return -ENOMEM;
> +
> + iov->dev = dev;
> + iov->cap = pos;
> + iov->totalvfs = total;
> + iov->initialvfs = initial;
> + iov->offset = offset;
> + iov->stride = stride;
> + iov->align = pgsz << 12;
> + mutex_init(&iov->mutex);
> +
> + for (i = 0; i < PCI_IOV_NUM_BAR; i++) {
> + res = dev->resource + PCI_IOV_RESOURCES + i;
> + pos = iov->cap + PCI_IOV_BAR_0 + i * 4;
> + i += pci_read_base(dev, pci_bar_unknown, res, pos);
> + if (!res->flags)
> + continue;
> + res->flags &= ~IORESOURCE_SIZEALIGN;
> + res->end = res->start + resource_size(res) * total - 1;
> + }
> +
> + dev->iov = iov;
> + dev_info(&dev->dev, "SR-IOV capability is initialized\n");
Same questions here that I had for the ARI stuff. Does this
dev_info add value, or is it more noise, and is this message
informative enough?
> +
> + return 0;
> +}
> +
> +/**
> + * pci_iov_release - release resources used by SR-IOV capability
> + * @dev: the PCI device
> + */
> +void pci_iov_release(struct pci_dev *dev)
> +{
> + if (!dev->iov)
> + return;
> +
> + mutex_destroy(&dev->iov->mutex);
> + kfree(dev->iov);
> + dev->iov = NULL;
> +}
> +
> +/**
> + * pci_iov_create_sysfs - create sysfs for SR-IOV capability
> + * @dev: the PCI device
> + */
> +void pci_iov_create_sysfs(struct pci_dev *dev)
> +{
> + int rc;
> + int i, j;
> + struct pci_iov *iov = dev->iov;
> +
> + if (!iov)
> + return;
> +
> + iov->ve = kzalloc(sizeof(*iov->ve) * iov->totalvfs, GFP_KERNEL);
> + if (!iov->ve)
> + return;
> +
> + for (i = 0; i < iov->totalvfs; i++) {
> + iov->ve[i].vfn = i;
> + iov->ve[i].iov = iov;
> + }
> +
> + rc = kobject_init_and_add(&iov->kobj, &iov_ktype,
> + &dev->dev.kobj, "iov");
> + if (rc)
> + goto failed1;
> +
> + for (i = 0; i < ARRAY_SIZE(iov_attr); i++) {
> + rc = sysfs_create_file(&iov->kobj, &iov_attr[i].attr);
> + if (rc)
> + goto failed2;
> + }
> +
> + for (i = 0; i < iov->totalvfs; i++) {
> + sprintf(iov->ve[i].name, "%d", i);
> + rc = kobject_init_and_add(&iov->ve[i].kobj, &iov_ktype,
> + &iov->kobj, iov->ve[i].name);
> + if (rc)
> + goto failed3;
> + rc = sysfs_create_file(&iov->ve[i].kobj, &vf_attr.attr);
> + if (rc) {
> + kobject_put(&iov->ve[i].kobj);
> + goto failed3;
> + }
> + }
Do you want to emit a kobject_uevent here after success?
Alternatively, have you investigated making these virtual
functions into real struct device's? You get a lot of sysfs stuff
for free if you do so, including correct place in sysfs hierarchy
and uevents, etc.
My major complaints from last round (more documentation,
shouldn't be a PCI hotplug driver) have been addressed. I'll let
others comment about the other parts of your patch series.
Thanks.
/ac
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
