[PATCH 1/3] PCI: vpd handle longer delays in access

[Stephen Hemminger <shemminger@xxxxxxxxxx>]

Accessing the VPD area can take a long time.  The existing 
VPD access code fails consistently on my hardware. There are comments
in the SysKonnect vendor driver that it can take up to 13ms per word. 

Change the access routines to:
  * use a mutex rather than spinning with IRQ's disabled and lock held
  * have a longer timeout
  * call schedule while spinning to provide some responsivness

Signed-off-by: Stephen Hemminger <shemminger@xxxxxxxxxx>


--- a/drivers/pci/access.c	2008-09-04 09:06:51.000000000 -0700
+++ b/drivers/pci/access.c	2008-09-04 10:16:52.000000000 -0700
@@ -133,7 +133,7 @@ PCI_USER_WRITE_CONFIG(dword, u32)
 
 struct pci_vpd_pci22 {
 	struct pci_vpd base;
-	spinlock_t lock; /* controls access to hardware and the flags */
+	struct mutex lock;
 	u8	cap;
 	bool	busy;
 	bool	flag; /* value of F bit to wait for */
@@ -144,29 +144,33 @@ static int pci_vpd_pci22_wait(struct pci
 {
 	struct pci_vpd_pci22 *vpd =
 		container_of(dev->vpd, struct pci_vpd_pci22, base);
-	u16 flag, status;
-	int wait;
+	u16 flag = vpd->flag ? PCI_VPD_ADDR_F : 0;
+	unsigned long timeout = jiffies + (vpd->flag ? HZ/50 : HZ/10);
+	u16 status;
 	int ret;
 
 	if (!vpd->busy)
 		return 0;
 
-	flag = vpd->flag ? PCI_VPD_ADDR_F : 0;
-	wait = vpd->flag ? 10 : 1000; /* read: 100 us; write: 10 ms */
 	for (;;) {
-		ret = pci_user_read_config_word(dev,
-						vpd->cap + PCI_VPD_ADDR,
+		ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
 						&status);
 		if (ret < 0)
-			return ret;
+			break;
+
 		if ((status & PCI_VPD_ADDR_F) == flag) {
 			vpd->busy = false;
-			return 0;
+			break;
 		}
-		if (wait-- == 0)
+
+		if (time_after(jiffies, timeout))
 			return -ETIMEDOUT;
-		udelay(10);
+		if (signal_pending(current))
+			return -EINTR;
+		yield();
 	}
+
+	return ret;
 }
 
 static int pci_vpd_pci22_read(struct pci_dev *dev, int pos, int size,
@@ -183,7 +187,9 @@ static int pci_vpd_pci22_read(struct pci
 	if (size == 0)
 		return 0;
 
-	spin_lock_irq(&vpd->lock);
+	ret = mutex_lock_killable(&vpd->lock);
+	if (ret)
+		return ret;
 	ret = pci_vpd_pci22_wait(dev);
 	if (ret < 0)
 		goto out;
@@ -199,7 +205,7 @@ static int pci_vpd_pci22_read(struct pci
 	ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA,
 					 &val);
 out:
-	spin_unlock_irq(&vpd->lock);
+	mutex_unlock(&vpd->lock);
 	if (ret < 0)
 		return ret;
 
@@ -231,7 +237,9 @@ static int pci_vpd_pci22_write(struct pc
 	val |= ((u8) *buf++) << 16;
 	val |= ((u32)(u8) *buf++) << 24;
 
-	spin_lock_irq(&vpd->lock);
+	ret = mutex_lock_killable(&vpd->lock);
+	if (ret)
+		return ret;
 	ret = pci_vpd_pci22_wait(dev);
 	if (ret < 0)
 		goto out;
@@ -247,7 +255,7 @@ static int pci_vpd_pci22_write(struct pc
 	vpd->flag = 0;
 	ret = pci_vpd_pci22_wait(dev);
 out:
-	spin_unlock_irq(&vpd->lock);
+	mutex_unlock(&vpd->lock);
 	if (ret < 0)
 		return ret;
 
@@ -279,7 +287,7 @@ int pci_vpd_pci22_init(struct pci_dev *d
 
 	vpd->base.len = PCI_VPD_PCI22_SIZE;
 	vpd->base.ops = &pci_vpd_pci22_ops;
-	spin_lock_init(&vpd->lock);
+	mutex_init(&vpd->lock);
 	vpd->cap = cap;
 	vpd->busy = false;
 	dev->vpd = &vpd->base;

-- 

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html