Hi
> I am developing driver based on TI 3410 chipset. After
> downloading firmware using host, the USB bus system needs
> to be reset. The reset works fine but I cannot use the my
> target device because interrupt_in_urb is null. I am using
> usb serial driver on top of ti driver. I can see ttyUSB0
> created. After I remove the plug from my host and reconnect
> the system, the device works to be fine. Can you please let
> me know what could be going on. Should I close the serial
> device after downloading firmware. Why hotplug works after
> removing from system. I have done
> ti_usb_3410_5052.hotplug at /etc/hotplug.d. Can I execute
> hotplug from command line and see what is going on. If you
> have come across similar problem, please let me know. What
> steps of reinitialisation needs to be done after
> downloading firmware, in terms of data structures like
> interrupt_in, endpoints etc or I can probe the device once
> again.
> Thanks
> Amruth p.v
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
