On Fri, 13 Jun 2008, Bjorn Helgaas wrote:
> Convert printks to use dev_printk(). The most obvious change will
> be messages like this:
>
> -ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 31
> +cciss 0000:00:04.0: PCI INTA# -> GSI 31 (level, low) -> IRQ 31
I like the part identifying the driver.
I'm also okay with having fewer messages tagged with ACPI:
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
>
> Index: work11/drivers/acpi/pci_irq.c
> ===================================================================
> --- work11.orig/drivers/acpi/pci_irq.c 2008-06-12 16:53:52.000000000 -0600
> +++ work11/drivers/acpi/pci_irq.c 2008-06-13 09:32:19.000000000 -0600
> @@ -162,7 +162,7 @@ do_prt_fixups(struct acpi_prt_entry *ent
> !strcmp(prt->source, quirk->source) &&
> strlen(prt->source) >= strlen(quirk->actual_source)) {
> printk(KERN_WARNING PREFIX "firmware reports "
> - "%04x:%02x:%02x[%c] connected to %s; "
> + "%04x:%02x:%02x PCI INT%c# connected to %s; "
Can we delete the '#' from INTA# in this patch?
I don't think that using hardware polarity notation in kernel messages
clarifies anything, particularly since it is hard-coded and thus possibly
conflicting with the subsequent '(level, low)'...
otherwise,
Acked-by: Len Brown <len.brown@xxxxxxxxx>
thanks,
-Len
> "changing to %s\n",
> entry->id.segment, entry->id.bus,
> entry->id.device, 'A' + entry->pin,
> @@ -429,7 +429,7 @@ acpi_pci_irq_derive(struct pci_dev *dev,
> {
> struct pci_dev *bridge = dev;
> int irq = -1;
> - u8 bridge_pin = 0;
> + u8 bridge_pin = 0, orig_pin = pin;
>
>
> if (!dev)
> @@ -463,8 +463,8 @@ acpi_pci_irq_derive(struct pci_dev *dev,
> }
>
> if (irq < 0) {
> - printk(KERN_WARNING PREFIX "Unable to derive IRQ for device %s\n",
> - pci_name(dev));
> + dev_warn(&dev->dev, "can't derive routing for PCI INT%c#\n",
> + 'A' + orig_pin);
> return -1;
> }
>
> @@ -487,6 +487,7 @@ int acpi_pci_irq_enable(struct pci_dev *
> int triggering = ACPI_LEVEL_SENSITIVE;
> int polarity = ACPI_ACTIVE_LOW;
> char *link = NULL;
> + char link_desc[16];
> int rc;
>
>
> @@ -503,7 +504,7 @@ int acpi_pci_irq_enable(struct pci_dev *
> pin--;
>
> if (!dev->bus) {
> - printk(KERN_ERR PREFIX "Invalid (NULL) 'bus' field\n");
> + dev_err(&dev->dev, "invalid (NULL) 'bus' field\n");
> return -ENODEV;
> }
>
> @@ -538,8 +539,7 @@ int acpi_pci_irq_enable(struct pci_dev *
> * driver reported one, then use it. Exit in any case.
> */
> if (irq < 0) {
> - printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: no GSI",
> - pci_name(dev), ('A' + pin));
> + dev_warn(&dev->dev, "PCI INT%c#: no GSI", 'A' + pin);
> /* Interrupt Line values above 0xF are forbidden */
> if (dev->irq > 0 && (dev->irq <= 0xF)) {
> printk(" - using IRQ %d\n", dev->irq);
> @@ -554,21 +554,21 @@ int acpi_pci_irq_enable(struct pci_dev *
>
> rc = acpi_register_gsi(irq, triggering, polarity);
> if (rc < 0) {
> - printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: failed "
> - "to register GSI\n", pci_name(dev), ('A' + pin));
> + dev_warn(&dev->dev, "PCI INT%c#: failed to register GSI\n",
> + 'A' + pin);
> return rc;
> }
> dev->irq = rc;
>
> - printk(KERN_INFO PREFIX "PCI Interrupt %s[%c] -> ",
> - pci_name(dev), 'A' + pin);
> -
> if (link)
> - printk("Link [%s] -> ", link);
> + snprintf(link_desc, sizeof(link_desc), " -> Link[%s]", link);
> + else
> + link_desc[0] = '\0';
>
> - printk("GSI %u (%s, %s) -> IRQ %d\n", irq,
> - (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
> - (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
> + dev_info(&dev->dev, "PCI INT%c#%s -> GSI %u (%s, %s) -> IRQ %d\n",
> + 'A' + pin, link_desc, irq,
> + (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
> + (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
>
> return 0;
> }
> @@ -616,10 +616,6 @@ void acpi_pci_irq_disable(struct pci_dev
> * (e.g. PCI_UNDEFINED_IRQ).
> */
>
> - printk(KERN_INFO PREFIX "PCI interrupt for device %s disabled\n",
> - pci_name(dev));
> -
> + dev_info(&dev->dev, "PCI INT%c# disabled\n", 'A' + pin);
> acpi_unregister_gsi(gsi);
> -
> - return;
> }
>
> --
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
