On Mon, 09 Jun 2008 23:01:36 +0530
Kamalesh Babulal <kamalesh@xxxxxxxxxxxxxxxxxx> wrote:
> Hi Andrew,
>
> The 2.6.26-rc5-mm1 kernel panics while bootup on 32 way, x86_64 machine.
> passing noapic as the command line parameter, boots up
> the machine fine.
>
> kernel BUG at arch/x86/kernel/io_apic_64.c:355!
> invalid opcode: 0000 [1] SMP
> last sysfs file:
> CPU 24
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.26-rc5-mm1-autotest #1
> RIP: 0010:[<ffffffff8021b9da>] [<ffffffff8021b9da>] add_pin_to_irq+0x7a/0x90
> RSP: 0018:ffff81061e4cbb60 EFLAGS: 00010216
> RAX: 00000000000000f0 RBX: 00000000000000f0 RCX: 0000000000000001
> RDX: 0000000000000018 RSI: 0000000000000006 RDI: 00000000000000f0
> RBP: 0000000000000006 R08: 0000000000000018 R09: 0000000000000006
> R10: 0000000000000008 R11: ffffffff803948e6 R12: 0000000000000001
> R13: 0000000000000001 R14: 0000000000000018 R15: ffff81061e4cbc04
> FS: 0000000000000000(0000) GS:ffff810bfe7be5c0(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 1, threadinfo ffff81061e4ca000, task ffff81032e4b96d0)
> Stack: 0000000000000006 ffffffff8021ba6e 00000000000000f0 0000000000000001
> 0000000000000000 0000000000000000 ffff81061e4cbc00 ffffffff80218991
> 00000000000000f0 0000000000000000 0000000000000001 ffffffff80218a1a
> Call Trace:
> [<ffffffff8021ba6e>] io_apic_set_pci_routing+0x7e/0xb0
> [<ffffffff80218991>] mp_register_gsi+0xb1/0xd0
> [<ffffffff80218a1a>] acpi_register_gsi+0x6a/0x70
> [<ffffffff80394b20>] acpi_pci_irq_enable+0x14f/0x220
> [<ffffffff803948e6>] acpi_pci_allocate_irq+0x0/0x4c
> [<ffffffff8036e14a>] do_pci_enable_device+0x4a/0x70
> [<ffffffff8036e1c1>] __pci_enable_device_flags+0x51/0x60
> [<ffffffff804f1608>] tg3_init_one+0x58/0x1640
> [<ffffffff80229790>] default_wake_function+0x0/0x10
> [<ffffffff8022e942>] set_cpus_allowed_ptr+0xc2/0xf0
> [<ffffffff803703b7>] pci_device_probe+0xe7/0x130
> [<ffffffff803c38b6>] driver_probe_device+0x96/0x1a0
> [<ffffffff803c3a49>] __driver_attach+0x89/0x90
> [<ffffffff803c39c0>] __driver_attach+0x0/0x90
> [<ffffffff803c2dbd>] bus_for_each_dev+0x4d/0x80
> [<ffffffff8028f708>] kmem_cache_alloc+0xc8/0xf0
> [<ffffffff803c341e>] bus_add_driver+0xae/0x220
> [<ffffffff803c3cd6>] driver_register+0x56/0x130
> [<ffffffff80370678>] __pci_register_driver+0x68/0xb0
> [<ffffffff806e5060>] tg3_init+0x0/0x20
> [<ffffffff806c8a63>] kernel_init+0x153/0x320
> [<ffffffff8020c378>] child_rip+0xa/0x12
> [<ffffffff806c8910>] kernel_init+0x0/0x320
> [<ffffffff8020c36e>] child_rip+0x0/0x12
>
>
> Code: 89 05 27 88 43 00 7f 29 48 0f bf c1 48 8d 14 00 48 c1 e0 03 48 29 d0 48 8d 90 00 44 74 80 66 89 32 66 44 89 42 02 48 83 c4 08 c3 <0f> 0b eb fe 66 90 48 c7 c7 08 7d 5e 80 31 c0 e8 72 7b 01 00 66
> RIP [<ffffffff8021b9da>] add_pin_to_irq+0x7a/0x90
> RSP <ffff81061e4cbb60>
> ---[ end trace 5a53b6247c28d358 ]---
Here:
static void add_pin_to_irq(unsigned int irq, int apic, int pin)
{
static int first_free_entry = NR_IRQS;
struct irq_pin_list *entry = irq_2_pin + irq;
BUG_ON(irq >= NR_IRQS);
There are massive changes to tg3, massive changes in the relevant x86
ACPI code and massive changes everywhere else.
So I don't have a clue who broke it, but it wasn't me!
You're testing linux-next, aren't you. Did you test the June 6 tree,
upon which 2.6.26-rc5-mm1 was based?
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
