Re: [PATCH net-next v19 06/13] memory-provider: dmabuf devmem memory provider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 15, 2024 at 9:22 PM Jakub Kicinski <kuba@xxxxxxxxxx> wrote:
>
> On Wed, 14 Aug 2024 17:32:53 +0100 Pavel Begunkov wrote:
> > > This is where I get a bit confused. Jakub did mention that it is
> > > desirable for core to verify that the driver did the right thing,
> > > instead of trusting that a driver did the right thing without
> > > verifying. Relying on a flag from the driver opens the door for the
> > > driver to say "I support this" but actually not create the mp
> > > page_pool. In my mind the explicit check is superior to getting
> > > feedback from the driver.
> >
> > You can apply the same argument to anything, but not like
> > after each for example ->ndo_start_xmit we dig into the
> > interface's pending queue to make sure it was actually queued.
> >
> > And even if you check that there is a page pool, the driver
> > can just create an empty pool that it'll never use. There
> > are always ways to make it wrong.
> >
> > Yes, there is a difference, and I'm not against it as a
> > WARN_ON_ONCE after failing it in a more explicit way.
> >
> > Jakub might have a different opinion on how it should look
> > like, and we can clarify on that, but I do believe it's a
> > confusing interface that can be easily made better.
>
> My queue API RFC patches had configuration arguments, not sure if this
> is the right version but you'll get the idea:
> https://github.com/kuba-moo/linux/blob/qcfg/include/net/netdev_cfg.h#L43-L50
> This way we can _tell_ the driver what the config should be. That part
> got lost somewhere along the way, because perhaps in its embryonic form
> it doesn't make sense.
>
> We can bring it back, add HDS with threshold of 0, to it, and a bit for
> non-readable memory. On top of that "capability bits" in struct
> netdev_queue_mgmt_ops to mark that the driver pays attention to particular
> fields of the config.
>
> Not sure if it should block the series, but that'd be the way I'd do it
> (for now?)
>

I'm not sure I want to go into a rabbit hole of adding configuration
via the queue API, blocking this series . We had discussed this months
back and figured that it's a significant undertaking on its own. I'm
not sure GVE has HDS threshold capability for example, and I'm also
not sure how to coexist header split negotiability via the queue API
when an ethtool API exists alongside it. I think this is worthy of
separating in its own follow up series.

For now detecting that the driver was able to create the page_pool
with the correct memory provider in core should be sufficient. Also
asking the driver to set a
netdev_rx_queue->unreadable_netmem_supported flag should also be
sufficient. I've implemented both locally and they work well.

> I'd keep the current check with a WARN_ON_ONCE(), tho.
> Given the absence of tests driver developers can use.
> Especially those who _aren't_ supporting the feature.
>

Yes what I have locally is the driver setting
netdev_rx_queue->unreadable_netmem_supported when header split is
turned on, and additionally a WARN_ON_ONCE around the check in core. I
was about to send that when I read your email. I'm hoping we don't
have to go through the scope creep of adding configuration via the
queue API, which I think is a very significant undertaking.

> > > and cons to each approach; I don't see a showstopping reason to go
> > > with one over the other.
> > >
> > >> And page_pool_check_memory_provider() is not that straightforward,
> > >> it doesn't walk through pools of a queue.
> > >
> > > Right, we don't save the pp of a queue, only a netdev. The outer loop
> > > checks all the pps of the netdev to find one with the correct binding,
> > > and the inner loop checks that this binding is attached to the correct
> > > queue.
> >
> > That's the thing, I doubt about the second part.
> >
> > net_devmem_bind_dmabuf_to_queue() {
> >       err = xa_alloc(&binding->bound_rxqs, &xa_idx, rxq);
> >       if (err)
> >               return err;
> >
> >       netdev_rx_queue_restart();
> >
> >       // page_pool_check_memory_provider
> >       ...
> >       xa_for_each(&binding->bound_rxqs, xa_idx, binding_rxq) {
> >               if (rxq == binding_rxq)
> >                       return success;
> > }
> >
> > Can't b4 the patches for some reason, but that's the highlight
> > from the patchset, correct me if I'm wrong. That xa_for_each
> > check is always true because you put the queue in there right
> > before it, and I don't that anyone could've erased it.
> >
> > The problem here is that it seems the ->bound_rxqs state doesn't
> > depend on what page pools were actually created and with what mp.
>
> FWIW I don't understand the point of walking the xa either.
> Just check the queue number of the pp you found matches,
> page pool params are saved in the page pool. No?
>

Yes, I changed this check to check pool->p.queue, and it works fine.

-- 
Thanks,
Mina





[Index of Archives]     [Linux SoC]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux