On 2/2/24 02:39, Tejun Heo wrote:
Hello,
On Thu, Feb 01, 2024 at 06:56:20PM +0100, Helge Deller wrote:
root@debian:~# drgn --main-symbols -s ./vmlinux ./wq_dump.py 2>&1 | tee L
Affinity Scopes
===============
wq_unbound_cpumask=0000ffff
CPU
nr_pods 16
pod_cpus [0]=00000001 [1]=00000002 [2]=00000004 [3]=00000008 [4]=00000010 [5]=00000020 [6]=00000040 [7]=00000080 [8]=00000100 [9]=00000200 [10]=00000400 [11]=00000800 [12]=00001000 [13]=00002000 [14]=00004000 [15]=00008000
pod_node [0]=0 [1]=0 [2]=0 [3]=0 [4]=0 [5]=0 [6]=0 [7]=0 [8]=0 [9]=0 [10]=0 [11]=0 [12]=0 [13]=0 [14]=0 [15]=0
cpu_pod [0]=0 [1]=1
wq_unbound_cpumask is saying there are 16 possible cpus but
for_each_possible_cpu() iteration is only giving two. Can you please apply
the following patch and post the boot dmesg? Thanks.
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index ffb625db9771..d3fa2bea4d75 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -7146,6 +7146,9 @@ void __init workqueue_init_early(void)
BUG_ON(!alloc_cpumask_var(&wq_requested_unbound_cpumask, GFP_KERNEL));
BUG_ON(!zalloc_cpumask_var(&wq_isolated_cpumask, GFP_KERNEL));
+ printk("XXX workqueue_init_early: possible_cpus=%*pb\n",
+ cpumask_pr_args(cpu_possible_mask));
+
cpumask_copy(wq_unbound_cpumask, cpu_possible_mask);
restrict_unbound_cpumask("HK_TYPE_WQ", housekeeping_cpumask(HK_TYPE_WQ));
restrict_unbound_cpumask("HK_TYPE_DOMAIN", housekeeping_cpumask(HK_TYPE_DOMAIN));
@@ -7290,6 +7293,9 @@ void __init workqueue_init(void)
struct worker_pool *pool;
int cpu, bkt;
+ printk("XXX workqueue_init: possible_cpus=%*pb\n",
+ cpumask_pr_args(cpu_possible_mask));
+
wq_cpu_intensive_thresh_init();
mutex_lock(&wq_pool_mutex);
@@ -7401,6 +7407,9 @@ void __init workqueue_init_topology(void)
struct workqueue_struct *wq;
int cpu;
+ printk("XXX workqueue_init_topology: possible_cpus=%*pb\n",
+ cpumask_pr_args(cpu_possible_mask));
+
init_pod_type(&wq_pod_types[WQ_AFFN_CPU], cpus_dont_share);
init_pod_type(&wq_pod_types[WQ_AFFN_SMT], cpus_share_smt);
init_pod_type(&wq_pod_types[WQ_AFFN_CACHE], cpus_share_cache);
Here it is:
[ 0.000000] Linux version 6.8.0-rc2-32bit+ (deller@carbonx1) (hppa-linux-gnu-gcc (GCC) 13.2.1 20230728 (Red Hat Cross 13.2.1-1), GNU ld version 2.40-3.fc39) #1294 SMP PREEMPT Fri Feb 2 09:24:28 CET 2024
[ 0.000000] FP[0] enabled: Rev 1 Model 15
[ 0.000000] The 32-bit Kernel has started...
[ 0.000000] Kernel default page size is 4 KB. Huge pages disabled.
[ 0.000000] Determining PDC firmware type: System Map.
[ 0.000000] model 00005020 00000481 00000000 02020202 77729da0 100000f0 00000004 000000ba 000000ba 00000000
[ 0.000000] vers 00000008
[ 0.000000] CPUID vers 15 rev 8 (0x000001e8)
[ 0.000000] capabilities 0x2
[ 0.000000] HP-UX model name: 9000/778/B160L
[ 0.000000] MPE/iX model name: 9000/778/B160L
[ 0.000000] Memory Ranges:
[ 0.000000] 0) Start 0x0000000000000000 End 0x000000001fffffff Size 512 MB
[ 0.000000] Total Memory: 512 MB
[ 0.000000] PDT: Firmware does not provide any page deallocation information.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000001ffffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] percpu: Embedded 16 pages/cpu s34912 r8192 d22432 u65536
[ 0.000000] SMP: bootstrap CPU ID is 0
[ 0.000000] Kernel command line: root=/dev/sda5 panic=-1 console=ttyS0 earlycon=pdc
[ 0.000000] earlycon: pdc0 at MMIO32be 0x00000000 (options '')
[ 0.000000] printk: legacy bootconsole [pdc0] enabled
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 61440 bytes
[ 0.000000] printk: log_buf_len min size: 65536 bytes
[ 0.000000] printk: log_buf_len: 131072 bytes
[ 0.000000] printk: early log buf free: 63792(97%)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 497732K/524288K available (7216K kernel code, 3452K rwdata, 2176K rodata, 3072K init, 388K bss, 26556K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] XXX workqueue_init_early: possible_cpus=ffff
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 96
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000149] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
[ 0.005146] Console: colour dummy device 160x64
[ 0.006640] Calibrating delay loop... 1771.11 BogoMIPS (lpj=8855552)
[ 0.123925] pid_max: default: 32768 minimum: 301
[ 0.128202] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.128461] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.159241] XXX workqueue_init: possible_cpus=ffff
[ 0.175221] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.176798] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.177562] TOC handler registered
[ 0.178992] rcu: Hierarchical SRCU implementation.
[ 0.179222] rcu: Max phase no-delay instances is 1000.
[ 0.193315] smp: Bringing up secondary CPUs ...
[ 0.194144] smp: Brought up 1 node, 1 CPU
[ 0.199106] XXX workqueue_init_topology: possible_cpus=ffff
[ 0.208842] devtmpfs: initialized
[ 0.217239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.218067] futex hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.224055] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.231058] EISA bus registered
[ 0.231481] Searching for devices...
[ 0.237416] Found devices:
[ 0.237623] 1. Phantom PseudoBC GSC+ Port [8] at 0xffc00000 { type:7, hv:0x504, sv:0x0, rev:0x0 }
[ 0.237874] 2. Dino PCI Bridge [8:0] at 0xfff80000 { type:13, hv:0x680, sv:0xa, rev:0x3 }
[ 0.238234] 3. Merlin+ 132 Dino RS-232 [8:0:63] at 0xfff83000 { type:10, hv:0x22, sv:0x8c, rev:0x0 }
[ 0.238490] 4. Merlin 160 Core BA [8:16] at 0xffd00000 { type:11, hv:0x3d, sv:0x81, rev:0x0 }, additional addresses: 0xffd0c000 0xffc00000
[ 0.238923] 5. Merlin 160 Core RS-232 [8:16:4] at 0xffd05000 { type:10, hv:0x3d, sv:0x8c, rev:0x0 }
[ 0.239193] 6. Merlin 160 Core Centronics [8:16:0] at 0xffd02000 { type:10, hv:0x3d, sv:0x74, rev:0x0 }, additional addresses: 0xffd01000 0xffd03000
[ 0.239595] 7. Memory [63] at 0xfffff000 { type:1, hv:0x67, sv:0x9, rev:0x0 }
[ 0.239839] 8. Merlin L2 160 (9000/778/B160L) [48] at 0xfffb0000 { type:0, hv:0x502, sv:0x4, rev:0x0 }
[ 0.240145] 9. Merlin L2 160 (9000/778/B160L) [49] at 0xfffb1000 { type:0, hv:0x502, sv:0x4, rev:0x0 }
[ 0.240509] Found qemu fw_cfg interface at 0xfffa0000
[ 0.243313] CPU0: cpu core 0 of socket 0
[ 0.244475] CPU1: cpu core 0 of socket 1
[ 0.248134] Releasing cpu 1 now, hpa=fffb1000
[ 0.255231] CPU(s): 2 out of 2 PA7300LC (PCX-L2) at 250.000000 MHz online
[ 0.257077] alternatives: applied 17 out of 1505 patches
[ 0.258013] Calculated flush threshold is 5909 KiB
[ 0.258162] Cache flush threshold set to 2 KiB
[ 0.258304] TLB flush threshold set to 480 KiB
[ 0.259216] Lasi version 0 at 0xffd00000 found.
[ 0.261123] Dino version 3.1 found at 0xfff80000
[ 0.263459] dino 8:0: PCI host bridge to bus 0000:00
[ 0.263841] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.264196] pci_bus 0000:00: root bus resource [mem 0xf0800000-0xff7fffff]
[ 0.264476] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.265734] pci 0000:00:00.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint
[ 0.267232] pci 0000:00:00.0: BAR 0 [io 0x1000-0x10ff]
[ 0.268292] pci 0000:00:00.0: BAR 1 [mem 0xff7fe000-0xff7fe3ff]
[ 0.269408] pci 0000:00:00.0: BAR 2 [mem 0xff7fc000-0xff7fdfff]
[ 0.277602] pci 0000:00:01.0: [1011:0019] type 00 class 0x020000 conventional PCI endpoint
[ 0.278298] pci 0000:00:01.0: BAR 0 [io 0x1100-0x117f]
[ 0.278820] pci 0000:00:01.0: BAR 1 [mem 0xff7ff000-0xff7ff07f]
[ 0.281323] pci 0000:00:02.0: [103c:1048] type 00 class 0x070000 conventional PCI endpoint
[ 0.281867] pci 0000:00:02.0: BAR 0 [io 0x1180-0x1187]
[ 0.284921] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.287179] pci 0000:00:00.0: BAR 2 [mem 0xf0800000-0xf0801fff]: assigned
[ 0.287830] pci 0000:00:00.0: BAR 1 [mem 0xf0802000-0xf08023ff]: assigned
[ 0.288225] pci 0000:00:00.0: BAR 0 [io 0x0100-0x01ff]: assigned
[ 0.288628] pci 0000:00:01.0: BAR 0 [io 0x0080-0x00ff]: assigned
[ 0.289002] pci 0000:00:01.0: BAR 1 [mem 0xf0803000-0xf080307f]: assigned
[ 0.289359] pci 0000:00:02.0: BAR 0 [io 0x0010-0x0017]: assigned
[ 0.290999] powersw: Soft power switch at 0xf07ffff0 enabled.
[ 0.314551] SCSI subsystem initialized
[ 0.317664] usbcore: registered new interface driver usbfs
[ 0.318202] usbcore: registered new interface driver hub
[ 0.318580] usbcore: registered new device driver usb
[ 0.334210] vgaarb: loaded
[ 0.337059] VFS: Disk quotas dquot_6.6.0
[ 0.337473] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.369580] NET: Registered PF_INET protocol family
[ 0.371471] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.380082] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 5120 bytes, linear)
[ 0.381103] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.381397] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.382605] TCP bind hash table entries: 4096 (order: 5, 163840 bytes, linear)
[ 0.383338] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.385144] UDP hash table entries: 256 (order: 1, 12288 bytes, linear)
[ 0.385743] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes, linear)
[ 0.387545] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.388172] PCI: CLS 16 bytes
[ 0.390311] clocksource: cr16: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[ 0.391141] clocksource: Switched to clocksource cr16
[ 0.391756] Enabling PDC chassis warnings support v0.05
[ 0.396076] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.404012] io scheduler mq-deadline registered
[ 0.404324] io scheduler kyber registered
[ 0.407216] PDC Stable Storage facility v0.30
[ 0.408521] sticore: STI GSC/PCI core graphics driver Version 0.9c
[ 0.496987] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.511533] printk: legacy console [ttyS0] disabled
[ 0.515146] 8:16:4: ttyS0 at MMIO 0xffd05800 (irq = 16, base_baud = 454545) is a 16550A
[ 0.518634] printk: legacy console [ttyS0] enabled
[ 0.518634] printk: legacy console [ttyS0] enabled
[ 0.519267] printk: legacy bootconsole [pdc0] disabled
[ 0.519267] printk: legacy bootconsole [pdc0] disabled
[ 0.528540] 8:0:63: ttyS1 at MMIO 0xfff83800 (irq = 18, base_baud = 454545) is a 16550A
[ 0.531850] serial 0000:00:02.0: enabling SERR and PARITY (0103 -> 0143)
[ 0.535316] 0000:00:02.0: ttyS2 at I/O 0x10 (irq = 21, base_baud = 115200) is a 16550A
[ 0.539332] parport_init_chip: initialize bidirectional-mode
[ 0.540300] parport0: PC-style at 0xffd02800, irq 17 [PCSPP,TRISTATE]
[ 0.667976] loop: module loaded
[ 0.669638] sym53c8xx 0000:00:00.0: enabling SERR and PARITY (0107 -> 0147)
[ 0.672643] sym0: <895a> rev 0x0 at pci 0000:00:00.0 irq 19
[ 0.678720] sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
[ 0.684386] sym0: SCSI BUS has been reset.
[ 0.687904] scsi host0: sym-2.2.3
[ 3.783993] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 3.784726] scsi target0:0:0: tagged command queuing enabled, command queue depth 16.
[ 3.785900] scsi target0:0:0: Beginning Domain Validation
[ 3.788722] scsi target0:0:0: Domain Validation skipping write tests
[ 3.788895] scsi target0:0:0: Ending Domain Validation
[ 3.801756] scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5
[ 3.802043] scsi target0:0:2: tagged command queuing enabled, command queue depth 16.
[ 3.802392] scsi target0:0:2: Beginning Domain Validation
[ 3.803995] scsi target0:0:2: Domain Validation skipping write tests
[ 3.804138] scsi target0:0:2: Ending Domain Validation
[ 3.816982] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 3.820181] sr 0:0:2:0: Power-on or device reset occurred
[ 3.822714] sr 0:0:2:0: [sr0] scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray
[ 3.823139] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.824901] sd 0:0:0:0: Power-on or device reset occurred
[ 3.828055] sd 0:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
[ 3.829255] sd 0:0:0:0: [sda] Write Protect is off
[ 3.832789] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.833235] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.833534] sr 0:0:2:0: Attached scsi generic sg1 type 5
[ 3.835756] tulip 0000:00:01.0: enabling SERR and PARITY (0103 -> 0143)
[ 3.849999] tulip0: EEPROM default media type Autosense
[ 3.850253] tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
[ 3.853899] tulip0: MII transceiver #1 config 3100 status 702c advertising 0501
[ 3.856302] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 3.870391] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.871194] net eth0: Digital DS21142/43 Tulip rev 0 at Port 0x80, 52:54:00:12:34:56, IRQ 20
[ 3.872279] e100: Intel(R) PRO/100 Network Driver
[ 3.872486] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.873836] e1000: Intel(R) PRO/1000 Network Driver
[ 3.874067] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.874406] e1000e: Intel(R) PRO/1000 Network Driver
[ 3.874536] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.875010] igb: Intel(R) Gigabit Ethernet Network Driver
[ 3.875212] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.875563] LASI 82596 driver - Revision: 1.30
[ 3.878798] HP SDC: No SDC found.
[ 3.879000] HP SDC MLC: Registering the System Domain Controller's HIL MLC.
[ 3.884554] HP SDC MLC: Request for raw HIL ISR hook denied
[ 3.906699] mousedev: PS/2 mouse device common for all mice
[ 3.912379] rtc-generic rtc-generic: registered as rtc0
[ 3.913033] rtc-generic rtc-generic: setting system clock to 2024-02-02T08:24:45 UTC (1706862285)
[ 3.919114] hid: raw HID events driver (C) Jiri Kosina
[ 3.919926] usbcore: registered new interface driver usbhid
[ 3.920146] usbhid: USB HID core driver
[ 3.921737] NET: Registered PF_PACKET protocol family
[ 3.924787] Key type dns_resolver registered
[ 4.092592] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 4.092910] EXT4-fs (sda5): write access will be enabled during recovery
[ 4.200680] EXT4-fs (sda5): recovery complete
[ 4.207887] EXT4-fs (sda5): mounted filesystem 0e24f05b-efd0-4f75-b1de-3309bd27dbd8 ro with ordered data mode. Quota mode: none.
[ 4.209030] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 4.214953] devtmpfs: mounted
[ 4.267329] Freeing unused kernel image (initmem) memory: 3072K
[ 4.267826] Write protected read-only-after-init data: 2k
[ 4.268225] Run /sbin/init as init process
[ 4.305438] process 'usr/lib/systemd/systemd' started with executable stack
[ 4.932357] systemd[1]: systemd 255.3-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK -SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.933521] systemd[1]: Detected architecture parisc.
Welcome to Debian GNU/Linux trixie/sid!
[...]
root@debian:~# lscpu
Architecture: parisc
Byte Order: Big Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Model name: PA7300LC (PCX-L2)
CPU family: PA-RISC 1.1e
Model: 9000/778/B160L - Merlin L2 160 (9000/778/B160L)
Thread(s) per core: 1
Core(s) per socket: 1
Socket(s): 2
BogoMIPS: 1771.11
root@debian:~# chcpu -d 1
[ 84.800279] Backtrace:
[ 84.802648] [<10448744>] workqueue_offline_cpu+0x1d4/0x1dc
[ 84.802648] [<10429db4>] cpuhp_invoke_callback+0xf8/0x200
[ 84.802648] [<1042a1d0>] cpuhp_thread_fun+0xb8/0x164
[ 84.802648] [<10452970>] smpboot_thread_fn+0x284/0x288
[ 84.802648] [<1044d8f4>] kthread+0x12c/0x13c
[ 84.802648] [<1040201c>] ret_from_kernel_thread+0x1c/0x24
[ 84.802648]
[ 84.802648]
[ 84.802648] Kernel Fault: Code=26 (Data memory access rights trap) at addr 00000000
[ 84.802648] CPU: 1 PID: 21 Comm: cpuhp/1 Not tainted 6.8.0-rc2-32bit+ #1294
[ 84.802648] Hardware name: 9000/778/B160L
[ 84.802648]
[ 84.802648] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[ 84.802648] PSW: 00000000000001001111111100001111 Not tainted
[ 84.802648] r00-03 0004ff0f 11011540 10446d9c 11e00500
[ 84.802648] r04-07 11c0b800 00000002 11c0d000 00000001
[ 84.802648] r08-11 110194e4 11019168 00000000 00000004
[ 84.802648] r12-15 10c78800 00000612 f0028050 f0027fd8
[ 84.802648] r16-19 fffffffc fee01180 f0027ed8 01735000
[ 84.802648] r20-23 0000ffff 13ae1a00 13ae1a00 00000000
[ 84.802648] r24-27 11c0c580 11c0d004 11c0d000 10ceb968
[ 84.802648] r28-31 00000000 0000000e 11e00580 00000018
[ 84.802648] sr00-03 00000000 00000000 00000000 000004af
[ 84.802648] sr04-07 00000000 00000000 00000000 00000000
[ 84.802648]
[ 84.802648] IASQ: 00000000 00000000 IAOQ: 10446db4 10446db8
[ 84.802648] IIR: 0f80109c ISR: 00000000 IOR: 00000000
[ 84.802648] CPU: 1 CR30: 11dd1710 CR31: 00000000
[ 84.802648] ORIG_R28: 00000612
[ 84.802648] IAOQ[0]: wq_update_pod+0x98/0x14c
[ 84.802648] IAOQ[1]: wq_update_pod+0x9c/0x14c
[ 84.802648] RP(r2): wq_update_pod+0x80/0x14c
[ 84.802648] Backtrace:
[ 84.802648] [<10448744>] workqueue_offline_cpu+0x1d4/0x1dc
[ 84.802648] [<10429db4>] cpuhp_invoke_callback+0xf8/0x200
[ 84.802648] [<1042a1d0>] cpuhp_thread_fun+0xb8/0x164
[ 84.802648] [<10452970>] smpboot_thread_fn+0x284/0x288
[ 84.802648] [<1044d8f4>] kthread+0x12c/0x13c
[ 84.802648] [<1040201c>] ret_from_kernel_thread+0x1c/0x24
[ 84.802648]
[ 84.802648] Kernel panic - not syncing: Kernel Fault
