From: James Morse <james.morse@xxxxxxx>
Neither arm64 nor riscv support physical hotadd of CPUs that were not
present at boot. For arm64 much of the platform description is in static
tables which do not have update methods. arm64 does support HOTPLUG_CPU,
which is backed by a firmware interface to turn CPUs on and off.
acpi_processor_hotadd_init() and acpi_processor_remove() are for adding
and removing CPUs that were not present at boot. arm64 systems that do this
are not supported as there is currently insufficient information in the
platform description. (e.g. did the GICR get removed too?)
arm64 currently relies on the MADT enabled flag check in map_gicc_mpidr()
to prevent CPUs that were not described as present at boot from being
added to the system. Similarly, riscv relies on the same check in
map_rintc_hartid(). Both architectures also rely on the weak 'always fails'
definitions of acpi_map_cpu() and arch_register_cpu().
Subsequent changes will redefine ACPI_HOTPLUG_CPU as making possible
CPUs present. Neither arm64 nor riscv support this.
Disable ACPI_HOTPLUG_CPU for arm64 and riscv by removing 'default y' and
selecting it on the other three ACPI architectures. This allows the weak
definitions of some symbols to be removed.
Signed-off-by: James Morse <james.morse@xxxxxxx>
Reviewed-by: Shaoqin Huang <shahuang@xxxxxxxxxx>
Reviewed-by: Gavin Shan <gshan@xxxxxxxxxx>
Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
---
Changes since RFC:
* Expanded conditions to avoid ACPI_HOTPLUG_CPU being enabled when
HOTPLUG_CPU isn't.
Changes since RFC v3:
* Dropped ia64 changes
---
arch/loongarch/Kconfig | 1 +
arch/x86/Kconfig | 1 +
drivers/acpi/Kconfig | 1 -
drivers/acpi/acpi_processor.c | 18 ------------------
4 files changed, 2 insertions(+), 19 deletions(-)
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index ee123820a476..331becb2cb4f 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -5,6 +5,7 @@ config LOONGARCH
select ACPI
select ACPI_GENERIC_GSI if ACPI
select ACPI_MCFG if ACPI
+ select ACPI_HOTPLUG_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
select ACPI_PPTT if ACPI
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_BINFMT_ELF_STATE
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3762f41bb092..dbdcfc708369 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -59,6 +59,7 @@ config X86
#
select ACPI_LEGACY_TABLES_LOOKUP if ACPI
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
+ select ACPI_HOTPLUG_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
select ARCH_32BIT_OFF_T if X86_32
select ARCH_CLOCKSOURCE_INIT
select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index f819e760ff19..a3acfc750fce 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -310,7 +310,6 @@ config ACPI_HOTPLUG_CPU
bool
depends on ACPI_PROCESSOR && HOTPLUG_CPU
select ACPI_CONTAINER
- default y
config ACPI_PROCESSOR_AGGREGATOR
tristate "Processor Aggregator"
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 0f5218e361df..4fe2ef54088c 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -184,24 +184,6 @@ static void __init acpi_pcc_cpufreq_init(void) {}
/* Initialization */
#ifdef CONFIG_ACPI_HOTPLUG_CPU
-int __weak acpi_map_cpu(acpi_handle handle,
- phys_cpuid_t physid, u32 acpi_id, int *pcpu)
-{
- return -ENODEV;
-}
-
-int __weak acpi_unmap_cpu(int cpu)
-{
- return -ENODEV;
-}
-
-int __weak arch_register_cpu(int cpu)
-{
- return -ENODEV;
-}
-
-void __weak arch_unregister_cpu(int cpu) {}
-
static int acpi_processor_hotadd_init(struct acpi_processor *pr)
{
unsigned long long sta;
--
2.30.2
