Re: [PATCH 09/21] riscv: dma-mapping: skip invalidation before bidirectional DMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 27, 2023 at 8:15 PM Arnd Bergmann <arnd@xxxxxxxxxx> wrote:
>
> From: Arnd Bergmann <arnd@xxxxxxxx>
>
> For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned
> first to let the device see data written by the CPU, and invalidated
> after the transfer to let the CPU see data written by the device.
>
> riscv also invalidates the caches before the transfer, which does
> not appear to serve any purpose.
Yes, we can't guarantee the CPU pre-load cache lines randomly during
dma working.

But I've two purposes to keep invalidates before dma transfer:
 - We clearly tell the CPU these cache lines are invalid. The caching
algorithm would use these invalid slots first instead of replacing
valid ones.
 - Invalidating is very cheap. Actually, flush and clean have the same
performance in our machine.

So, how about:

diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
index d919efab6eba..2c52fbc15064 100644
--- a/arch/riscv/mm/dma-noncoherent.c
+++ b/arch/riscv/mm/dma-noncoherent.c
@@ -22,8 +22,6 @@ void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
                ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
                break;
        case DMA_FROM_DEVICE:
-               ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
-               break;
        case DMA_BIDIRECTIONAL:
                ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
                break;
@@ -42,7 +40,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
                break;
        case DMA_FROM_DEVICE:
        case DMA_BIDIRECTIONAL:
                /* I'm not sure all drivers have guaranteed cacheline
alignment. If not, this inval would cause problems */
-               ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
+               ALT_CMO_OP(inval, vaddr, size, riscv_cbom_block_size);
                break;
        default:
                break;

>
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
>  arch/riscv/mm/dma-noncoherent.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
> index 640f4c496d26..69c80b2155a1 100644
> --- a/arch/riscv/mm/dma-noncoherent.c
> +++ b/arch/riscv/mm/dma-noncoherent.c
> @@ -25,7 +25,7 @@ void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
>                 ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
>                 break;
>         case DMA_BIDIRECTIONAL:
> -               ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
> +               ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
>                 break;
>         default:
>                 break;
> --
> 2.39.2
>


-- 
Best Regards
 Guo Ren




[Index of Archives]     [Linux SoC]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux