Honestly, I would prefer this to be split so as to make it easier to
review if nothing else.
On Tue, Apr 12, 2022 at 1:39 AM Dmitry Osipenko
<dmitry.osipenko@xxxxxxxxxxxxx> wrote:
>
> SoC platforms often have multiple ways of how to perform system's
> power-off and restart operations. Meanwhile today's kernel is limited to
> a single option. Add combined power-off+restart handler call chain API,
> which is inspired by the restart API. The new API provides both power-off
> and restart functionality.
>
> The old pm_power_off method will be kept around till all users are
> converted to the new API.
>
> Current restart API will be replaced by the new unified API since
> new API is its superset. The restart functionality of the sys-off handler
> API is built upon the existing restart-notifier APIs.
Which means that the existing notifier chains for system restart are
used as they are without modifications.
At least that's what follows from the code and it would be good to
mention it here.
Moreover, a new notifier chain is introduced for the power-off case
and it appears to be the counterpart of the restart_handler_list
chain, but then why is it blocking and not atomic like the latter?
> In order to ease conversion to the new API, convenient helpers are added
> for the common use-cases. They will reduce amount of boilerplate code and
> remove global variables. These helpers preserve old behaviour for cases
> where only one power-off handler is expected, this is what all existing
> drivers want, and thus, they could be easily converted to the new API.
> Users of the new API should explicitly enable power-off chaining by
> setting corresponding flag of the power_handler structure.
"the corresponding"
>
> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
> ---
> include/linux/reboot.h | 229 ++++++++++++++-
> kernel/power/hibernate.c | 2 +-
> kernel/reboot.c | 604 ++++++++++++++++++++++++++++++++++++++-
> 3 files changed, 827 insertions(+), 8 deletions(-)
>
> diff --git a/include/linux/reboot.h b/include/linux/reboot.h
> index a2429648d831..ba5e5dddcfcd 100644
> --- a/include/linux/reboot.h
> +++ b/include/linux/reboot.h
> @@ -8,10 +8,35 @@
>
> struct device;
>
> -#define SYS_DOWN 0x0001 /* Notify of system down */
> -#define SYS_RESTART SYS_DOWN
> -#define SYS_HALT 0x0002 /* Notify of system halt */
> -#define SYS_POWER_OFF 0x0003 /* Notify of system power off */
> +enum reboot_prepare_mode {
> + SYS_DOWN = 1, /* Notify of system down */
> + SYS_RESTART = SYS_DOWN,
> + SYS_HALT, /* Notify of system halt */
> + SYS_POWER_OFF, /* Notify of system power off */
> +};
> +
> +/*
> + * Standard restart priority levels. Intended to be set in the
> + * sys_off_handler.restart_priority field.
> + *
> + * Use `RESTART_PRIO_ABC +- prio` style for additional levels.
> + *
> + * RESTART_PRIO_RESERVED: Falls back to RESTART_PRIO_DEFAULT.
> + * Drivers may leave priority initialized
> + * to zero, to auto-set it to the default level.
What is the "default level" here?
> + *
> + * RESTART_PRIO_LOW: Use this for handler of last resort.
> + *
> + * RESTART_PRIO_DEFAULT: Use this for default/generic handler.
> + *
> + * RESTART_PRIO_HIGH: Use this if you have multiple handlers and
> + * this handler has higher priority than the
> + * default handler.
> + */
> +#define RESTART_PRIO_RESERVED 0
> +#define RESTART_PRIO_LOW 8
> +#define RESTART_PRIO_DEFAULT 128
> +#define RESTART_PRIO_HIGH 192
>
> enum reboot_mode {
> REBOOT_UNDEFINED = -1,
> @@ -49,6 +74,201 @@ extern int register_restart_handler(struct notifier_block *);
> extern int unregister_restart_handler(struct notifier_block *);
> extern void do_kernel_restart(char *cmd);
>
> +/*
> + * System power-off and restart API.
> + */
> +
> +/*
> + * Standard power-off priority levels. Intended to be set in the
> + * sys_off_handler.power_off_priority field.
> + *
> + * Use `POWEROFF_PRIO_ABC +- prio` style for additional levels.
What exactly does this mean?
> + *
> + * POWEROFF_PRIO_RESERVED: Falls back to POWEROFF_PRIO_DEFAULT.
> + * Drivers may leave priority initialized
> + * to zero, to auto-set it to the default level.
> + *
> + * POWEROFF_PRIO_PLATFORM: Intended to be used by platform-level handler.
> + * Has lowest priority since device drivers are
> + * expected to take over platform handler which
> + * doesn't allow further callback chaining.
> + *
> + * POWEROFF_PRIO_DEFAULT: Use this for default/generic handler.
> + *
> + * POWEROFF_PRIO_FIRMWARE: Use this if handler uses firmware call.
> + * Has highest priority since firmware is expected
> + * to know best how to power-off hardware properly.
> + */
> +#define POWEROFF_PRIO_RESERVED 0
> +#define POWEROFF_PRIO_PLATFORM 1
> +#define POWEROFF_PRIO_DEFAULT 128
> +#define POWEROFF_PRIO_HIGH 192
> +#define POWEROFF_PRIO_FIRMWARE 224
> +
> +enum poweroff_mode {
> + POWEROFF_NORMAL = 0,
Why not just POWEROFF?
> + POWEROFF_PREPARE,
> +};
> +
> +/**
> + * struct power_off_data - Power-off callback argument
> + *
> + * @cb_data: Callback data.
> + */
> +struct power_off_data {
> + void *cb_data;
> +};
> +
> +/**
> + * struct power_off_prep_data - Power-off preparation callback argument
> + *
> + * @cb_data: Callback data.
> + */
> +struct power_off_prep_data {
> + void *cb_data;
> +};
Why does this need to be a separate data type?
> +
> +/**
> + * struct restart_data - Restart callback argument
> + *
> + * @cb_data: Callback data.
> + * @cmd: Restart command string.
> + * @stop_chain: Further lower priority callbacks won't be executed if set to
> + * true. Can be changed within callback. Default is false.
> + * @mode: Reboot mode ID.
> + */
> +struct restart_data {
> + void *cb_data;
> + const char *cmd;
> + bool stop_chain;
> + enum reboot_mode mode;
> +};
> +
> +/**
> + * struct reboot_prep_data - Reboot and shutdown preparation callback argument
> + *
> + * @cb_data: Callback data.
> + * @cmd: Restart command string.
> + * @stop_chain: Further lower priority callbacks won't be executed if set to
> + * true. Can be changed within callback. Default is false.
> + * @mode: Preparation mode ID.
> + */
> +struct reboot_prep_data {
> + void *cb_data;
> + const char *cmd;
> + bool stop_chain;
> + enum reboot_prepare_mode mode;
> +};
There seem to be some duplicate data items between struct restart_data
and struct reboot_prep_data, so what's the reason why they are
separate?
> +
> +struct sys_off_handler_private_data {
> + struct notifier_block power_off_nb;
> + struct notifier_block restart_nb;
> + struct notifier_block reboot_nb;
So restart_nb is going to be added to restart_handler_list, eboot_nb
will be added to reboot_notifier_list (which both exist already) and
power_off_nb will be added to the new power_off_handler_list, right?
Of course, this means that reboot_nb will be used in
kernel_restart_prepare() and kernel_shutdown_prepare(), so the
corresponding callback will be invoked in both the restart and
power-off cases.
It would be good to document that somehow.
> + void (*platform_power_off_cb)(void);
> + void (*simple_power_off_cb)(void *data);
> + void *simple_power_off_cb_data;
Is there any particular reason to put these callbacks here and not
directly into struct sys_off_handler?
> + bool registered;
> +};
> +
> +/**
> + * struct sys_off_handler - System power-off and restart handler
> + *
> + * @cb_data: Pointer to user's data.
> + *
> + * @power_off_cb: Callback that powers off this machine. Inactive if NULL.
> + *
> + * @power_off_prepare_cb: Power-off preparation callback. All power-off
> + * preparation callbacks are invoked after @reboot_prepare_cb and before
> + * @power_off_cb. Inactive if NULL.
> + *
> + * @power_off_priority: Power-off callback priority, must be unique.
> + * Zero value is reserved and auto-reassigned to POWEROFF_PRIO_DEFAULT.
> + * Inactive if @power_off_cb is NULL.
> + *
> + * @power_off_chaining_allowed: Set to false if callback's execution should
> + * stop when @power_off_cb fails to power off this machine. True if further
> + * lower priority power-off callback should be executed. False is default
> + * value.
> + *
> + * @restart_cb: Callback that reboots this machine. Inactive if NULL.
> + *
> + * @restart_priority: Restart callback priority, must be unique. Zero value
> + * is reserved and auto-reassigned to RESTART_PRIO_DEFAULT. Inactive if
> + * @restart_cb is NULL.
> + *
> + * @restart_chaining_disallowed: Set to true if callback's execution should
> + * stop when @restart_cb fails to restart this machine. False if further
> + * lower priority restart callback should be executed. False is default
> + * value.
> + *
> + * @reboot_prepare_cb: Reboot/shutdown preparation callback. All reboot
> + * preparation callbacks are invoked before @restart_cb or @power_off_cb,
> + * depending on the mode. It's registered with register_reboot_notifier().
> + * The point is to remove boilerplate code from drivers which use this
> + * callback in conjunction with the restart/power-off callbacks.
> + *
> + * @reboot_priority: Reboot/shutdown preparation callback priority, doesn't
> + * need to be unique. Zero is default value. Inactive if @reboot_prepare_cb
> + * is NULL.
It is unclear that the ->reboot_prepare_cb() callback is going to be
used for both restart and power-off and reboot_priority is about the
preparation phase only.
And in the preparation phase the priority may not matter that much,
because there are users who don't care about the ordering as long as
their stuff is called at all.
Honestly, I would change the naming here, because what it is is quite
confusing at least to me. Especially that "restart" and "reboot" seem
to be used interchangeably in the comments.
> + *
> + * @priv: Internal data. Shouldn't be touched.
> + *
> + * Describes power-off and restart handlers which are invoked by kernel
> + * to power off or restart this machine. Supports prioritized chaining for
> + * both restart and power-off handlers.
> + *
> + * Struct sys_off_handler can be static. Members of this structure must not be
> + * altered while handler is registered.
> + *
> + * Fill the structure members and pass it to @register_sys_off_handler().
> + */
> +struct sys_off_handler {
> + void *cb_data;
> +
> + void (*power_off_cb)(struct power_off_data *data);
> + void (*power_off_prepare_cb)(struct power_off_prep_data *data);
> + int power_off_priority;
> + bool power_off_chaining_allowed;
> +
> + void (*restart_cb)(struct restart_data *data);
> + int restart_priority;
> + bool restart_chaining_disallowed;
> +
> + void (*reboot_prepare_cb)(struct reboot_prep_data *data);
> + int reboot_priority;
> +
> + const struct sys_off_handler_private_data priv;
Why is it const? Because of the callbacks in there?
Doesn't this mean that all struct sys_off_handler need to be static?
> +};
> +
> +int register_sys_off_handler(struct sys_off_handler *handler);
> +int unregister_sys_off_handler(struct sys_off_handler *handler);
> +
> +int devm_register_sys_off_handler(struct device *dev,
> + struct sys_off_handler *handler);
> +
> +int devm_register_prioritized_power_off_handler(struct device *dev,
> + int priority,
> + void (*callback)(void *data),
> + void *cb_data);
> +
> +int devm_register_simple_power_off_handler(struct device *dev,
> + void (*callback)(void *data),
> + void *cb_data);
> +
> +int register_platform_power_off(void (*power_off)(void));
> +int unregister_platform_power_off(void (*power_off)(void));
> +
> +int devm_register_prioritized_restart_handler(struct device *dev,
> + int priority,
> + void (*callback)(struct restart_data *data),
> + void *cb_data);
> +
> +int devm_register_simple_restart_handler(struct device *dev,
> + void (*callback)(struct restart_data *data),
> + void *cb_data);
> +
> +void do_kernel_power_off(void);
> +
> /*
> * Architecture-specific implementations of sys_reboot commands.
> */
> @@ -70,6 +290,7 @@ extern void kernel_restart_prepare(char *cmd);
> extern void kernel_restart(char *cmd);
> extern void kernel_halt(void);
> extern void kernel_power_off(void);
> +extern bool kernel_can_power_off(void);
>
> void ctrl_alt_del(void);
>
> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> index 938d5c78b421..a9464b4a3209 100644
> --- a/kernel/power/hibernate.c
> +++ b/kernel/power/hibernate.c
> @@ -665,7 +665,7 @@ static void power_down(void)
> hibernation_platform_enter();
> fallthrough;
> case HIBERNATION_SHUTDOWN:
> - if (pm_power_off)
> + if (kernel_can_power_off())
> kernel_power_off();
> break;
> }
> diff --git a/kernel/reboot.c b/kernel/reboot.c
> index acdae4e95061..e76e2570dcf5 100644
> --- a/kernel/reboot.c
> +++ b/kernel/reboot.c
> @@ -296,6 +296,595 @@ void kernel_halt(void)
> }
> EXPORT_SYMBOL_GPL(kernel_halt);
>
> +/*
> + * Notifier list for kernel code which wants to be called
> + * to power off the system.
> + */
> +static BLOCKING_NOTIFIER_HEAD(power_off_handler_list);
> +
> +/*
> + * Temporary stub that prevents linkage failure while we're in process
> + * of removing all uses of legacy pm_power_off() around the kernel.
Nit: inconsistent comment formatting.
> + */
> +void __weak (*pm_power_off)(void);
> +
> +static void dummy_pm_power_off(void)
> +{
> + /* temporary stub until pm_power_off() is gone, see more below */
> +}
> +
> +static struct notifier_block *pm_power_off_nb;
> +
> +/**
> + * register_power_off_handler - Register function to be called to power off
> + * the system
> + * @nb: Info about handler function to be called
> + * @nb->priority: Handler priority. Handlers should follow the
> + * following guidelines for setting priorities.
> + * 0: Reserved
> + * 1: Power-off handler of last resort,
> + * with limited power-off capabilities
> + * 128: Default power-off handler; use if no other
> + * power-off handler is expected to be available,
> + * and/or if power-off functionality is
> + * sufficient to power-off the entire system
> + * 255: Highest priority power-off handler, will
> + * preempt all other power-off handlers
> + *
> + * Registers a function with code to be called to power off the
> + * system.
Because this is only used internally in this file, I'd say what it
does directly, that is "Add a notifier to the power-off chain used for
powering off the system".
> + *
> + * Registered functions will be called as last step of the power-off
> + * sequence.
> + *
> + * Registered functions are expected to power off the system immediately.
> + * If more than one function is registered, the power-off handler priority
> + * selects which function will be called first.
> + *
> + * Power-off handlers are expected to be registered from non-architecture
> + * code, typically from drivers. A typical use case would be a system
> + * where power-off functionality is provided through a PMIC. Multiple
> + * power-off handlers may exist; for example, one power-off handler might
> + * turn off the entire system, while another only turns off part of
> + * system. In such cases, the power-off handler which only disables part
> + * of the hardware is expected to register with low priority to ensure
> + * that it only runs if no other means to power off the system is
> + * available.
I would move the above 3 paragraphs to the description comment for
power_off_handler_list.
> + *
> + * Currently always returns zero, as blocking_notifier_chain_register()
> + * always returns zero.
> + */
> +static int register_power_off_handler(struct notifier_block *nb)
> +{
> + int ret;
> +
> + ret = blocking_notifier_chain_register_unique_prio(&power_off_handler_list, nb);
> + if (ret && ret != -EBUSY)
> + return ret;
> +
> + if (!ret)
> + goto set_pm_power_off;
> +
> + /*
> + * Handler must have unique priority. Otherwise call order is
> + * determined by registration order, which is unreliable.
> + *
> + * This requirement will become mandatory once all drivers
> + * will be converted to use new sys-off API.
> + */
> + pr_err("failed to register power-off handler using unique priority\n");
> +
> + ret = blocking_notifier_chain_register(&power_off_handler_list, nb);
> + if (ret)
> + return ret;
> +
> + /*
> + * Some drivers check whether pm_power_off was already installed.
> + * Install dummy callback using new API to preserve old behaviour
> + * for those drivers during period of transition to the new API.
> + */
> +set_pm_power_off:
> + if (!pm_power_off) {
> + pm_power_off = dummy_pm_power_off;
> + pm_power_off_nb = nb;
> + }
> +
> + return 0;
> +}
> +
> +static int unregister_power_off_handler(struct notifier_block *nb)
> +{
> + if (nb == pm_power_off_nb) {
> + if (pm_power_off == dummy_pm_power_off)
> + pm_power_off = NULL;
> +
> + pm_power_off_nb = NULL;
> + }
> +
> + return blocking_notifier_chain_unregister(&power_off_handler_list, nb);
> +}
> +
> +static void devm_unregister_power_off_handler(void *data)
> +{
> + struct notifier_block *nb = data;
> +
> + unregister_power_off_handler(nb);
> +}
> +
> +static int devm_register_power_off_handler(struct device *dev,
> + struct notifier_block *nb)
> +{
> + int err;
> +
> + err = register_power_off_handler(nb);
> + if (err)
> + return err;
> +
> + return devm_add_action_or_reset(dev, devm_unregister_power_off_handler,
> + nb);
> +}
> +
> +static int sys_off_handler_power_off(struct notifier_block *nb,
> + unsigned long mode, void *unused)
> +{
> + struct power_off_prep_data prep_data = {};
> + struct sys_off_handler_private_data *priv;
> + struct power_off_data data = {};
> + struct sys_off_handler *h;
> + int ret = NOTIFY_DONE;
> +
> + priv = container_of(nb, struct sys_off_handler_private_data, power_off_nb);
> + h = container_of(priv, struct sys_off_handler, priv);
> + prep_data.cb_data = h->cb_data;
> + data.cb_data = h->cb_data;
> +
> + switch (mode) {
> + case POWEROFF_NORMAL:
> + if (h->power_off_cb)
> + h->power_off_cb(&data);
> +
> + if (priv->simple_power_off_cb)
> + priv->simple_power_off_cb(priv->simple_power_off_cb_data);
> +
> + if (priv->platform_power_off_cb)
> + priv->platform_power_off_cb();
The invocation of the priv callbacks here confuses me quite a bit.
Can you please at least add a comment explaining this?
> +
> + if (!h->power_off_chaining_allowed)
> + ret = NOTIFY_STOP;
> +
> + break;
> +
> + case POWEROFF_PREPARE:
> + if (h->power_off_prepare_cb)
> + h->power_off_prepare_cb(&prep_data);
> +
> + break;
> +
> + default:
> + unreachable();
> + }
> +
> + return ret;
> +}
> +
> +static int sys_off_handler_restart(struct notifier_block *nb,
> + unsigned long mode, void *cmd)
> +{
> + struct sys_off_handler_private_data *priv;
> + struct restart_data data = {};
> + struct sys_off_handler *h;
> +
> + priv = container_of(nb, struct sys_off_handler_private_data, restart_nb);
> + h = container_of(priv, struct sys_off_handler, priv);
> +
> + data.stop_chain = h->restart_chaining_disallowed;
> + data.cb_data = h->cb_data;
> + data.mode = mode;
> + data.cmd = cmd;
> +
> + h->restart_cb(&data);
Wouldn't it be a bit more straightforward to allow ->restart_cb() to
return a value being either NOTIFY_STOP or NOTIFY_DONE?
> +
> + return data.stop_chain ? NOTIFY_STOP : NOTIFY_DONE;
And I would prefer
if (data.stop_chain)
return NOTIFY_STOP;
return NOTIFY_DONE;
> +}
> +
> +static int sys_off_handler_reboot(struct notifier_block *nb,
> + unsigned long mode, void *cmd)
> +{
> + struct sys_off_handler_private_data *priv;
> + struct reboot_prep_data data = {};
> + struct sys_off_handler *h;
> +
> + priv = container_of(nb, struct sys_off_handler_private_data, reboot_nb);
> + h = container_of(priv, struct sys_off_handler, priv);
> +
> + data.cb_data = h->cb_data;
> + data.stop_chain = false;
> + data.mode = mode;
> + data.cmd = cmd;
> +
> + h->reboot_prepare_cb(&data);
> +
> + return data.stop_chain ? NOTIFY_STOP : NOTIFY_DONE;
And analogously here.
> +}
> +
> +static struct sys_off_handler_private_data *
> +sys_off_handler_private_data(struct sys_off_handler *handler)
> +{
> + return (struct sys_off_handler_private_data *)&handler->priv;
Is the cast needed to avoid a warning about "const"?
> +}
> +
> +/**
> + * devm_register_sys_off_handler - Register system power-off/restart handler
register_sys_off_handler
> + * @dev: Device that registers handler
> + * @handler: System-off handler
> + *
> + * Registers handler that will be called as last step of the power-off
> + * and restart sequences.
Not necessarily as the last step, because there may be other system
power-off/restart handlers called after it.
I would just say "at the end of the power-off and restart sequences".
Moreover, it registers the "reboot_cb" part that is not called "at the
end" even.
Also, because this is the function that will be used by drivers etc to
register handlers, I would give some more information on how the
object registered by it is going to be used to the prospective users.
> + *
> + * Returns zero on success, or error code on failure.
> + */
> +int register_sys_off_handler(struct sys_off_handler *handler)
> +{
> + struct sys_off_handler_private_data *priv;
> + int err, priority;
> +
> + priv = sys_off_handler_private_data(handler);
> +
> + /* sanity-check whether handler is registered twice */
> + if (priv->registered)
> + return -EBUSY;
> +
> + if (handler->power_off_cb || handler->power_off_prepare_cb) {
> + if (handler->power_off_priority == POWEROFF_PRIO_RESERVED)
> + priority = POWEROFF_PRIO_DEFAULT;
I'm not sure that this helps.
I mean, why can't the users of this new API pass POWEROFF_PRIO_DEFAULT
directly if they want "default"?
> + else
> + priority = handler->power_off_priority;
> +
> + priv->power_off_nb.notifier_call = sys_off_handler_power_off;
> + priv->power_off_nb.priority = priority;
> +
> + err = register_power_off_handler(&priv->power_off_nb);
> + if (err)
> + goto reset_sys_off_handler;
> + }
> +
> + if (handler->restart_cb) {
> + if (handler->restart_priority == RESTART_PRIO_RESERVED)
> + priority = RESTART_PRIO_DEFAULT;
> + else
> + priority = handler->restart_priority;
> +
> + priv->restart_nb.notifier_call = sys_off_handler_restart;
> + priv->restart_nb.priority = priority;
> +
> + err = register_restart_handler(&priv->restart_nb);
> + if (err)
> + goto unreg_power_off_handler;
> + }
> +
> + if (handler->reboot_prepare_cb) {
> + priv->reboot_nb.notifier_call = sys_off_handler_reboot;
> + priv->reboot_nb.priority = handler->reboot_priority;
> +
> + err = register_reboot_notifier(&priv->reboot_nb);
> + if (err)
> + goto unreg_restart_handler;
> + }
> +
> + priv->registered = true;
> +
> + return 0;
> +
> +unreg_restart_handler:
> + if (handler->restart_cb)
> + unregister_restart_handler(&priv->restart_nb);
> +
> +unreg_power_off_handler:
> + if (handler->power_off_cb)
> + unregister_power_off_handler(&priv->power_off_nb);
> +
> +reset_sys_off_handler:
> + memset(priv, 0, sizeof(*priv));
> +
> + return err;
> +}
> +EXPORT_SYMBOL(register_sys_off_handler);
> +
> +/**
> + * unregister_sys_off_handler - Unregister system power-off/restart handler
> + * @handler: System-off handler
> + *
> + * Unregisters sys-off handler. Does nothing and returns zero if handler
> + * is NULL.
> + *
> + * Returns zero on success, or error code on failure.
> + */
> +int unregister_sys_off_handler(struct sys_off_handler *handler)
> +{
> + struct sys_off_handler_private_data *priv;
> +
> + if (!handler)
> + return 0;
> +
> + priv = sys_off_handler_private_data(handler);
> +
> + /* sanity-check whether handler is unregistered twice */
> + if (!priv->registered)
> + return -EINVAL;
> +
> + if (handler->reboot_prepare_cb)
> + unregister_reboot_notifier(&priv->reboot_nb);
> +
> + if (handler->restart_cb)
> + unregister_restart_handler(&priv->restart_nb);
> +
> + if (handler->power_off_cb)
> + unregister_power_off_handler(&priv->power_off_nb);
> +
> + memset(priv, 0, sizeof(*priv));
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(unregister_sys_off_handler);
> +
> +static void devm_unregister_sys_off_handler(void *data)
> +{
> + struct sys_off_handler *handler = data;
> +
> + unregister_sys_off_handler(handler);
> +}
> +
> +/**
> + * devm_register_sys_off_handler - Register system power-off/restart handler
> + * @dev: Device that registers handler
> + * @handler: System-off handler
> + *
> + * Resource-managed variant of register_sys_off_handler().
> + *
> + * Returns zero on success, or error code on failure.
> + */
> +int devm_register_sys_off_handler(struct device *dev,
> + struct sys_off_handler *handler)
> +{
> + int err;
> +
> + err = register_sys_off_handler(handler);
> + if (err)
> + return err;
> +
> + return devm_add_action_or_reset(dev, devm_unregister_sys_off_handler,
> + handler);
> +}
> +EXPORT_SYMBOL(devm_register_sys_off_handler);
> +
> +/**
> + * devm_register_prioritized_power_off_handler - Register prioritized power-off callback
> + * @dev: Device that registers callback
> + * @priority: Callback's priority
> + * @callback: Callback function
> + * @cb_data: Callback's argument
> + *
> + * Registers resource-managed power-off callback with a given priority.
> + * It will be called as last step of the power-off sequence. Callbacks
> + * chaining is disabled, i.e. further lower priority callbacks won't
> + * be executed if this @callback will fail to execute.
> + *
> + * Returns zero on success, or error code on failure.
What's the case in which this should be used instead of registering a
full sys_off handler?
> + */
> +int devm_register_prioritized_power_off_handler(struct device *dev,
> + int priority,
> + void (*callback)(void *data),
> + void *cb_data)
> +{
> + struct sys_off_handler_private_data *priv;
> + struct sys_off_handler *handler;
> +
> + handler = devm_kzalloc(dev, sizeof(*handler), GFP_KERNEL);
> + if (!handler)
> + return -ENOMEM;
> +
> + if (priority == POWEROFF_PRIO_RESERVED)
> + priority = POWEROFF_PRIO_DEFAULT;
> +
> + priv = sys_off_handler_private_data(handler);
> +
> + priv->power_off_nb.notifier_call = sys_off_handler_power_off;
> + priv->power_off_nb.priority = priority;
> + priv->simple_power_off_cb_data = cb_data;
> + priv->simple_power_off_cb = callback;
> +
> + return devm_register_power_off_handler(dev, &priv->power_off_nb);
> +}
> +EXPORT_SYMBOL(devm_register_prioritized_power_off_handler);
> +
> +int devm_register_prioritized_power_off_handler(struct device *dev,
> + int priority,
> + void (*callback)(void *data),
> + void *cb_data);
> +
> +/**
> + * devm_register_simple_power_off_handler - Register simple power-off callback
> + * @dev: Device that registers callback
> + * @callback: Callback function
> + * @cb_data: Callback's argument
> + *
> + * Registers resource-managed power-off callback with default priority.
> + * It will be invoked as last step of the power-off sequence. Further
> + * lower priority callbacks won't be executed if this @callback fails.
> + *
> + * Returns zero on success, or error code on failure.
And here?
> + */
> +int devm_register_simple_power_off_handler(struct device *dev,
> + void (*callback)(void *data),
> + void *cb_data)
> +{
> + return devm_register_prioritized_power_off_handler(dev,
> + POWEROFF_PRIO_DEFAULT,
> + callback, cb_data);
> +}
> +EXPORT_SYMBOL(devm_register_simple_power_off_handler);
> +
> +/**
> + * devm_register_prioritized_restart_handler - Register prioritized restart callback
> + * @dev: Device that registers callback
> + * @priority: Callback's priority
> + * @callback: Callback function
> + * @cb_data: Callback's argument
> + *
> + * Registers resource-managed restart callback with a given priority.
> + * It will be called as a part of the restart sequence. Callbacks
> + * chaining is disabled, i.e. further lower priority callbacks won't
> + * be executed if this @callback will fail to execute.
> + *
> + * Returns zero on success, or error code on failure.
And here?
> + */
> +int devm_register_prioritized_restart_handler(struct device *dev,
> + int priority,
> + void (*callback)(struct restart_data *data),
> + void *cb_data)
> +{
> + struct sys_off_handler *handler;
> +
> + handler = devm_kzalloc(dev, sizeof(*handler), GFP_KERNEL);
> + if (!handler)
> + return -ENOMEM;
> +
> + if (priority == RESTART_PRIO_RESERVED)
> + priority = RESTART_PRIO_DEFAULT;
> +
> + handler->restart_priority = priority;
> + handler->restart_cb = callback;
> + handler->cb_data = cb_data;
> +
> + return devm_register_sys_off_handler(dev, handler);
> +}
> +EXPORT_SYMBOL(devm_register_prioritized_restart_handler);
> +
> +/**
> + * devm_register_simple_restart_handler - Register simple restart callback
> + * @dev: Device that registers callback
> + * @callback: Callback function
> + * @cb_data: Callback's argument
> + *
> + * Registers resource-managed restart callback with default priority.
> + * It will be invoked as a part of the restart sequence. Further
> + * lower priority callback will be executed if this @callback fails.
> + *
> + * Returns zero on success, or error code on failure.
And here?
> + */
> +int devm_register_simple_restart_handler(struct device *dev,
> + void (*callback)(struct restart_data *data),
> + void *cb_data)
> +{
> + return devm_register_prioritized_restart_handler(dev,
> + RESTART_PRIO_DEFAULT,
> + callback, cb_data);
> +}
> +EXPORT_SYMBOL(devm_register_simple_restart_handler);
> +
> +static struct sys_off_handler platform_power_off_handler = {
> + .priv = {
> + .power_off_nb = {
> + .notifier_call = sys_off_handler_power_off,
> + .priority = POWEROFF_PRIO_PLATFORM,
> + },
> + },
> +};
> +
> +static DEFINE_SPINLOCK(platform_power_off_lock);
> +
> +/**
> + * register_platform_power_off - Register platform-level power-off callback
> + * @power_off: Power-off callback
> + *
> + * Registers power-off callback that will be called as last step
> + * of the power-off sequence. This callback is expected to be invoked
> + * for the last resort. Further lower priority callbacks won't be
> + * executed if @power_off fails. Only one platform power-off callback
> + * is allowed to be registered at a time.
> + *
> + * Returns zero on success, or error code on failure.
What's the use case for this?
> + */
> +int register_platform_power_off(void (*power_off)(void))
> +{
> + struct sys_off_handler_private_data *priv;
> + int ret = 0;
> +
> + priv = sys_off_handler_private_data(&platform_power_off_handler);
> +
> + spin_lock(&platform_power_off_lock);
> + if (priv->platform_power_off_cb)
> + ret = -EBUSY;
> + else
> + priv->platform_power_off_cb = power_off;
Wasn't priv supposed to be const?
> + spin_unlock(&platform_power_off_lock);
> +
> + if (ret)
> + return ret;
> +
> + ret = register_power_off_handler(&priv->power_off_nb);
> + if (ret)
> + priv->platform_power_off_cb = NULL;
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(register_platform_power_off);
> +
> +/**
> + * unregister_platform_power_off - Unregister platform-level power-off callback
> + * @power_off: Power-off callback
> + *
> + * Unregisters previously registered platform power-off callback.
> + *
> + * Returns zero on success, or error code on failure.
> + */
> +int unregister_platform_power_off(void (*power_off)(void))
> +{
> + struct sys_off_handler_private_data *priv;
> + int ret;
> +
> + priv = sys_off_handler_private_data(&platform_power_off_handler);
> +
> + if (priv->platform_power_off_cb != power_off)
> + return -EINVAL;
> +
> + ret = unregister_power_off_handler(&priv->power_off_nb);
> + priv->platform_power_off_cb = NULL;
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(unregister_platform_power_off);
> +
> +/**
> + * do_kernel_power_off - Execute kernel power-off handler call chain
> + *
> + * Calls functions registered with register_power_off_handler.
> + *
> + * Expected to be called as last step of the power-off sequence.
> + *
> + * Powers off the system immediately if a power-off handler function has
> + * been registered. Otherwise does nothing.
> + */
> +void do_kernel_power_off(void)
> +{
> + /* legacy pm_power_off() is unchained and has highest priority */
> + if (pm_power_off && pm_power_off != dummy_pm_power_off)
> + return pm_power_off();
> +
> + blocking_notifier_call_chain(&power_off_handler_list, POWEROFF_NORMAL,
> + NULL);
> +}
> +
> +static void do_kernel_power_off_prepare(void)
> +{
> + /* legacy pm_power_off_prepare() is unchained and has highest priority */
> + if (pm_power_off_prepare)
> + return pm_power_off_prepare();
> +
> + blocking_notifier_call_chain(&power_off_handler_list, POWEROFF_PREPARE,
> + NULL);
> +}
> +
> /**
> * kernel_power_off - power_off the system
> *
> @@ -304,8 +893,7 @@ EXPORT_SYMBOL_GPL(kernel_halt);
> void kernel_power_off(void)
> {
> kernel_shutdown_prepare(SYSTEM_POWER_OFF);
> - if (pm_power_off_prepare)
> - pm_power_off_prepare();
> + do_kernel_power_off_prepare();
> migrate_to_reboot_cpu();
> syscore_shutdown();
> pr_emerg("Power down\n");
> @@ -314,6 +902,16 @@ void kernel_power_off(void)
> }
> EXPORT_SYMBOL_GPL(kernel_power_off);
>
> +bool kernel_can_power_off(void)
> +{
> + if (!pm_power_off &&
> + blocking_notifier_call_chain_is_empty(&power_off_handler_list))
> + return false;
> +
> + return true;
return pm_power_off ||
blocking_notifier_call_chain_is_empty(&power_off_handler_list);
> +}
> +EXPORT_SYMBOL_GPL(kernel_can_power_off);
> +
> DEFINE_MUTEX(system_transition_mutex);
>
> /*
> @@ -355,7 +953,7 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
> /* Instead of trying to make the power_off code look like
> * halt when pm_power_off is not set do it the easy way.
> */
> - if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
> + if (cmd == LINUX_REBOOT_CMD_POWER_OFF && !kernel_can_power_off())
> cmd = LINUX_REBOOT_CMD_HALT;
>
> mutex_lock(&system_transition_mutex);
> --
