On Wed, Apr 7, 2021 at 2:34 PM Greg Kroah-Hartman
<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> The common scripts/install.sh script will now work for parisc, all that
> is needed is to add the compressed image type to it. So add that file
> type check, and then we can remove the two different copies of the
> parisc install.sh script that were only different by one line and have
> the arch call the common install script.
>
> Cc: "James E.J. Bottomley" <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
> Cc: Helge Deller <deller@xxxxxx>
> Cc: linux-parisc@xxxxxxxxxxxxxxx
> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> ---
> arch/parisc/Makefile | 4 +--
> arch/parisc/boot/Makefile | 2 +-
> arch/parisc/boot/install.sh | 65 ------------------------------------
> arch/parisc/install.sh | 66 -------------------------------------
> scripts/install.sh | 1 +
> 5 files changed, 4 insertions(+), 134 deletions(-)
> delete mode 100644 arch/parisc/boot/install.sh
> delete mode 100644 arch/parisc/install.sh
>
> diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
> index 7d9f71aa829a..296d8ab8e2aa 100644
> --- a/arch/parisc/Makefile
> +++ b/arch/parisc/Makefile
> @@ -164,10 +164,10 @@ vmlinuz: vmlinux
> endif
>
> install:
> - $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
> + $(CONFIG_SHELL) $(srctree)/scripts/install.sh \
> $(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
> zinstall:
> - $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
> + $(CONFIG_SHELL) $(srctree)/scripts/install.sh \
> $(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
>
> CLEAN_FILES += lifimage
> diff --git a/arch/parisc/boot/Makefile b/arch/parisc/boot/Makefile
> index 61f44142cfe1..ad2611929aee 100644
> --- a/arch/parisc/boot/Makefile
> +++ b/arch/parisc/boot/Makefile
> @@ -17,5 +17,5 @@ $(obj)/compressed/vmlinux: FORCE
> $(Q)$(MAKE) $(build)=$(obj)/compressed $@
>
> install: $(CONFIGURE) $(obj)/bzImage
> - sh -x $(srctree)/$(obj)/install.sh $(KERNELRELEASE) $(obj)/bzImage \
> + sh -x $(srctree)/scripts/install.sh $(KERNELRELEASE) $(obj)/bzImage \
> System.map "$(INSTALL_PATH)"
As far as I understood, there is no way to invoke this 'install' target
in arch/parisc/boot/Makefile since everything is done
by arch/parisc/Makefile.
Can we remove this 'install' rule entirely?
> diff --git a/arch/parisc/boot/install.sh b/arch/parisc/boot/install.sh
> deleted file mode 100644
> index 8f7c365fad83..000000000000
> --- a/arch/parisc/boot/install.sh
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -#!/bin/sh
> -#
> -# arch/parisc/install.sh, derived from arch/i386/boot/install.sh
> -#
> -# This file is subject to the terms and conditions of the GNU General Public
> -# License. See the file "COPYING" in the main directory of this archive
> -# for more details.
> -#
> -# Copyright (C) 1995 by Linus Torvalds
> -#
> -# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
> -#
> -# "make install" script for i386 architecture
> -#
> -# Arguments:
> -# $1 - kernel version
> -# $2 - kernel image file
> -# $3 - kernel map file
> -# $4 - default install path (blank if root directory)
> -#
> -
> -verify () {
> - if [ ! -f "$1" ]; then
> - echo "" 1>&2
> - echo " *** Missing file: $1" 1>&2
> - echo ' *** You need to run "make" before "make install".' 1>&2
> - echo "" 1>&2
> - exit 1
> - fi
> -}
> -
> -# Make sure the files actually exist
> -
> -verify "$2"
> -verify "$3"
> -
> -# User may have a custom install script
> -
> -if [ -n "${INSTALLKERNEL}" ]; then
> - if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
> - if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
> -fi
> -
> -# Default install
> -
> -if [ "$(basename $2)" = "zImage" ]; then
> -# Compressed install
> - echo "Installing compressed kernel"
> - base=vmlinuz
> -else
> -# Normal install
> - echo "Installing normal kernel"
> - base=vmlinux
> -fi
> -
> -if [ -f $4/$base-$1 ]; then
> - mv $4/$base-$1 $4/$base-$1.old
> -fi
> -cat $2 > $4/$base-$1
> -
> -# Install system map file
> -if [ -f $4/System.map-$1 ]; then
> - mv $4/System.map-$1 $4/System.map-$1.old
> -fi
> -cp $3 $4/System.map-$1
> diff --git a/arch/parisc/install.sh b/arch/parisc/install.sh
> deleted file mode 100644
> index 056d588befdd..000000000000
> --- a/arch/parisc/install.sh
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -#!/bin/sh
> -#
> -# arch/parisc/install.sh, derived from arch/i386/boot/install.sh
> -#
> -# This file is subject to the terms and conditions of the GNU General Public
> -# License. See the file "COPYING" in the main directory of this archive
> -# for more details.
> -#
> -# Copyright (C) 1995 by Linus Torvalds
> -#
> -# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
> -#
> -# "make install" script for i386 architecture
> -#
> -# Arguments:
> -# $1 - kernel version
> -# $2 - kernel image file
> -# $3 - kernel map file
> -# $4 - default install path (blank if root directory)
> -#
> -
> -verify () {
> - if [ ! -f "$1" ]; then
> - echo "" 1>&2
> - echo " *** Missing file: $1" 1>&2
> - echo ' *** You need to run "make" before "make install".' 1>&2
> - echo "" 1>&2
> - exit 1
> - fi
> -}
> -
> -# Make sure the files actually exist
> -
> -verify "$2"
> -verify "$3"
> -
> -# User may have a custom install script
> -
> -if [ -n "${INSTALLKERNEL}" ]; then
> - if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
> - if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
> -fi
> -
> -# Default install
> -
> -if [ "$(basename $2)" = "vmlinuz" ]; then
> -# Compressed install
> - echo "Installing compressed kernel"
> - base=vmlinuz
> -else
> -# Normal install
> - echo "Installing normal kernel"
> - base=vmlinux
> -fi
> -
> -if [ -f $4/$base-$1 ]; then
> - mv $4/$base-$1 $4/$base-$1.old
> -fi
> -cat $2 > $4/$base-$1
> -
> -# Install system map file
> -if [ -f $4/System.map-$1 ]; then
> - mv $4/System.map-$1 $4/System.map-$1.old
> -fi
> -cp $3 $4/System.map-$1
> -
> diff --git a/scripts/install.sh b/scripts/install.sh
> index 407ffa65062c..e0ffb95737d4 100644
> --- a/scripts/install.sh
> +++ b/scripts/install.sh
> @@ -53,6 +53,7 @@ base=$(basename "$2")
> if [ "$base" = "bzImage" ] ||
> [ "$base" = "Image.gz" ] ||
> [ "$base" = "vmlinux.gz" ] ||
> + [ "$base" = "vmlinuz" ] ||
> [ "$base" = "zImage" ] ; then
> # Compressed install
> echo "Installing compressed kernel"
> --
> 2.31.1
>
--
Best Regards
Masahiro Yamada
