20.10.20 16:45 Helge Deller wrote:
Latest Linux kernels v5.8 and v5.9 fail to boot for me on the C8000
machines with this error:
mptspi: probe of 0000:40:01.0 failed with error -12
mptbase: ioc1: ERROR - Insufficient memory to add adapter!
mptspi: probe of 0000:40:01.1 failed with error -12
The c8000 has a built-in Broadcom / LSI 53c1030 PCI-X Fusion-MPT Dual
Ultra320 SCSI controller.
Do other people see this as well?
Works for me on a rp2470 with this card but no disks attached (gcc-10.2 from Gentoo, this test machine has usually been stable):
lspci:
00:00.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
00:01.0 SCSI storage controller: Broadcom / LSI 53C896/897 (rev 07)
00:01.1 SCSI storage controller: Broadcom / LSI 53C896/897 (rev 07)
00:02.0 SCSI storage controller: Broadcom / LSI 53c875 (rev 37)
00:02.1 SCSI storage controller: Broadcom / LSI 53c875 (rev 37)
00:04.0 System peripheral: Hewlett-Packard Company Diva [GSP] Management Board (rev 01)
00:04.1 Serial controller: Hewlett-Packard Company Diva Serial [GSP] Multiport UART (rev 03)
10:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mach64 GT-B [3D Rage II+ DVD] (rev 9a)
20:00.0 SCSI storage controller: Broadcom / LSI 53c1010 66MHz Ultra3 SCSI Adapter (rev 01)
20:00.1 SCSI storage controller: Broadcom / LSI 53c1010 66MHz Ultra3 SCSI Adapter (rev 01)
30:00.0 SCSI storage controller: Adaptec AIC-7870P/7881U [AHA-2940U/UW/D/S76] (rev 01)
30:02.0 SCSI storage controller: Broadcom / LSI 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
30:02.1 SCSI storage controller: Broadcom / LSI 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
dmesg:
[ 0.000000] Linux version 5.9.0 (mroos@rp2470) (hppa64-unknown-linux-gnu-gcc (Gentoo 10.2.0 p1) 10.2.0, GNU ld (Gentoo 2.33.1 p1) 2.33.1) #248 Mon Oct 12 19:01:45 EEST 2020
...
[ 2.623778] pci 0000:30:02.0: [1000:0030] type 00 class 0x010000
[ 2.625453] pci 0000:30:02.0: reg 0x10: [io 0x30000-0x300ff]
[ 2.625712] pci 0000:30:02.0: reg 0x14: [mem 0x00000000-0x0001ffff 64bit]
[ 2.627793] pci 0000:30:02.0: reg 0x1c: [mem 0x00000000-0x0001ffff 64bit]
[ 2.630015] pci 0000:30:02.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
[ 2.630532] pci 0000:30:02.0: supports D1 D2
[ 2.632633] pci 0000:30:02.1: [1000:0030] type 00 class 0x010000
[ 2.632909] pci 0000:30:02.1: reg 0x10: [io 0x30000-0x300ff]
[ 2.647585] pci 0000:30:02.1: reg 0x14: [mem 0x00000000-0x0001ffff 64bit]
[ 2.650580] pci 0000:30:02.1: reg 0x1c: [mem 0x00000000-0x0001ffff 64bit]
[ 2.650876] pci 0000:30:02.1: reg 0x30: [mem 0x00000000-0x000fffff pref]
[ 2.655192] pci 0000:30:02.1: supports D1 D2
[ 2.657716] pci 0000:30:02.0: can't claim BAR 0 [io 0x30000-0x300ff]: address conflict with 0000:30:00.0 [io 0x30000-0x300ff]
[ 2.659477] pci 0000:30:02.1: can't claim BAR 0 [io 0x30000-0x300ff]: address conflict with 0000:30:00.0 [io 0x30000-0x300ff]
[ 2.661856] pci 0000:30:02.0: BAR 6: assigned [mem 0xfffffffffb000000-0xfffffffffb0fffff pref]
[ 2.664079] pci 0000:30:02.1: BAR 6: assigned [mem 0xfffffffffb100000-0xfffffffffb1fffff pref]
[ 2.666330] pci 0000:30:02.0: BAR 1: assigned [mem 0xfffffffffb200000-0xfffffffffb21ffff 64bit]
[ 2.674350] pci 0000:30:02.0: BAR 3: assigned [mem 0xfffffffffb220000-0xfffffffffb23ffff 64bit]
[ 2.674679] pci 0000:30:02.1: BAR 1: assigned [mem 0xfffffffffb240000-0xfffffffffb25ffff 64bit]
[ 2.676975] pci 0000:30:02.1: BAR 3: assigned [mem 0xfffffffffb260000-0xfffffffffb27ffff 64bit]
[ 2.679263] pci 0000:30:00.0: BAR 6: assigned [mem 0xfffffffffb280000-0xfffffffffb28ffff pref]
[ 2.681484] pci 0000:30:00.0: BAR 1: assigned [mem 0xfffffffffb290000-0xfffffffffb290fff]
[ 2.683749] pci 0000:30:02.0: BAR 0: assigned [io 0x30100-0x301ff]
[ 2.829064] pci 0000:30:02.1: BAR 0: assigned [io 0x30200-0x302ff]
...
[ 59.788086] Fusion MPT SPI Host driver 3.04.20
[ 59.788436] mptspi 0000:30:02.0: enabling device (0000 -> 0002)
[ 59.912240] mptspi 0000:30:02.0: enabling SERR and PARITY (0002 -> 0142)
[ 61.848400] scsi host7: ioc0: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=26
[ 62.541761] mptspi 0000:30:02.1: enabling device (0000 -> 0002)
[ 62.542024] mptspi 0000:30:02.1: enabling SERR and PARITY (0002 -> 0142)
[ 62.548157] mptbase: ioc1: Initiating bringup
[ 63.272365] ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
[ 64.020620] scsi host8: ioc1: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=27
--
Meelis Roos <mroos@xxxxxxxx>
