While 5.8.0 worked fine on my HP RP2470 (Gentoo with 10.2.0 kgcc), yesterdays dddcbc139e96 and todays a1d21081a60d crash on boot. I have started bisecting it.
Last output lines from 5.8.0-13161-gdddcbc139e96:
[ 1.150985] 1. Crescendo 750 W2 at 0xfffffffffffa0000 [160] { 0, 0x0, 0x5e3, 0x00004 }
[ 1.243570] 2. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x09b, 0x00009 }
[ 1.243792] 3. Astro BC Runway Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x582, 0x0000b }
[ 1.382893] 4. Elroy PCI Bridge at 0xfffffffffed30000 [0/0] { 13, 0x0, 0x782, 0x0000a }
[ 1.522243] 5. Elroy PCI Bridge at 0xfffffffffed34000 [0/2] { 13, 0x0, 0x782, 0x0000a }
[ 1.660767] 6. Elroy PCI Bridge at 0xfffffffffed38000 [0/4] { 13, 0x0, 0x782, 0x0000a }
[ 1.799247] 7. Elroy PCI Bridge at 0xfffffffffed3c000 [0/6] { 13, 0x0, 0x782, 0x0000a }
[ 1.799500]
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH OFF ON ON
LED State: There was a system interruption that did not take the system down.
Check Chassis and Console Logs for error messages.
processor system initialization 1C00
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
h support not available.
[ 2.639001] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH FLASH ON ON
LED State: System Running. Unexpected Reboot. Non-critical Error Detected.
Check Chassis and Console Logs for error messages.
processor system panic 1B00
---------------------------------------------------------------------------------------------------
Last output lines from 5.8.0-13249-ga1d21081a60d:
[ 1.151696] 1. Crescendo 750 W2 at 0xfffffffffffa0000 [160] { 0, 0x0, 0x5e3, 0x00004 }
[ 1.242819] 2. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x09b, 0x00009 }
[ 1.243041] 3. Astro BC Runway Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x582, 0x0000b }
[ 1.383414] 4. Elroy PCI Bridge at 0xfffffffffed30000 [0/0] { 13, 0x0, 0x782, 0x0000a }
[ 1.523072] 5. Elroy PCI Bridge at 0xfffffffffed34000 [0/2] { 13, 0x0, 0x782, 0x0000a }
[ 1.662053] 6. Elroy PCI Bridge at 0xfffffffffed38000 [0/4] { 13, 0x0, 0x782, 0x0000a }
[ 1.800405] 7. Elroy PCI Bridge at 0xfffffffffed3c000 [0/6] { 13, 0x0, 0x782, 0x0000a }
[ 1.800658]
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH OFF ON ON
LED State: There was a system interruption that did not take the system down.
Check Chassis and Console Logs for error messages.
processor system initialization 1C00
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH FLASH ON ON
LED State: System Running. Unexpected Reboot. Non-critical Error Detected.
Check Chassis and Console Logs for error messages.
processor system panic 1B00
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH FLASH ON ON
LED State: System Running. Unexpected Reboot. Non-critical Error Detected.
Check Chassis and Console Logs for error messages.
processor system panic 1B00
--
Meelis Roos <mroos@xxxxxxxx>
