[PATCH v1 5/5] tulip: uli526x: use generic power management

[Vaibhav Gupta <vaibhavgupta40@xxxxxxxxx>]

With the support of generic PM callbacks, drivers no longer need to use
legacy .suspend() and .resume() in which they had to maintain PCI states
changes and device's power state themselves.

Legacy PM involves usage of PCI helper functions like pci_enable_wake()
which is no longer recommended.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@xxxxxxxxx>
---
 drivers/net/ethernet/dec/tulip/uli526x.c | 48 ++++--------------------
 1 file changed, 8 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
index f726436b1985..f942399f0f32 100644
--- a/drivers/net/ethernet/dec/tulip/uli526x.c
+++ b/drivers/net/ethernet/dec/tulip/uli526x.c
@@ -1163,65 +1163,41 @@ static void uli526x_dynamic_reset(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-
-#ifdef CONFIG_PM
-
 /*
  *	Suspend the interface.
  */
 
-static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused uli526x_suspend(struct device *dev_d)
 {
-	struct net_device *dev = pci_get_drvdata(pdev);
-	pci_power_t power_state;
-	int err;
+	struct net_device *dev = dev_get_drvdata(dev_d);
 
 	ULI526X_DBUG(0, "uli526x_suspend", 0);
 
-	pci_save_state(pdev);
-
 	if (!netif_running(dev))
 		return 0;
 
 	netif_device_detach(dev);
 	uli526x_reset_prepare(dev);
 
-	power_state = pci_choose_state(pdev, state);
-	pci_enable_wake(pdev, power_state, 0);
-	err = pci_set_power_state(pdev, power_state);
-	if (err) {
-		netif_device_attach(dev);
-		/* Re-initialize ULI526X board */
-		uli526x_init(dev);
-		/* Restart upper layer interface */
-		netif_wake_queue(dev);
-	}
+	device_set_wakeup_enable(dev_d, 0);
 
-	return err;
+	return 0;
 }
 
 /*
  *	Resume the interface.
  */
 
-static int uli526x_resume(struct pci_dev *pdev)
+static int __maybe_unused uli526x_resume(struct device *dev_d)
 {
-	struct net_device *dev = pci_get_drvdata(pdev);
-	int err;
+	struct net_device *dev = dev_get_drvdata(dev_d);
 
 	ULI526X_DBUG(0, "uli526x_resume", 0);
 
-	pci_restore_state(pdev);
 
 	if (!netif_running(dev))
 		return 0;
 
-	err = pci_set_power_state(pdev, PCI_D0);
-	if (err) {
-		netdev_warn(dev, "Could not put device into D0\n");
-		return err;
-	}
-
 	netif_device_attach(dev);
 	/* Re-initialize ULI526X board */
 	uli526x_init(dev);
@@ -1231,14 +1207,6 @@ static int uli526x_resume(struct pci_dev *pdev)
 	return 0;
 }
 
-#else /* !CONFIG_PM */
-
-#define uli526x_suspend	NULL
-#define uli526x_resume	NULL
-
-#endif /* !CONFIG_PM */
-
-
 /*
  *	free all allocated rx buffer
  */
@@ -1761,14 +1729,14 @@ static const struct pci_device_id uli526x_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl);
 
+static SIMPLE_DEV_PM_OPS(uli526x_pm_ops, uli526x_suspend, uli526x_resume);
 
 static struct pci_driver uli526x_driver = {
 	.name		= "uli526x",
 	.id_table	= uli526x_pci_tbl,
 	.probe		= uli526x_init_one,
 	.remove		= uli526x_remove_one,
-	.suspend	= uli526x_suspend,
-	.resume		= uli526x_resume,
+	.driver.pm	= &uli526x_pm_ops,
 };
 
 MODULE_AUTHOR("Peer Chen, peer.chen@xxxxxxxxxx");
-- 
2.27.0