Hi Adrian, I just sucessfully installed a hppa B180L workstation. Installation happened via serial console, since it seems the kernel has a bug which hangs the machine when started via graphic console (STIcon and stifb). I dropped the 2019-05-09 NETINST ISO image via "dd" to a second hard disc and installed from there, which worked. Good work! Helge On 12.05.19 14:42, LX wrote: > 2019-05-09 works now well on my hppa C8000 [on boot, usage of IPL must be NO, else the installer crashes on hardware detection] > IPL no: installation successful, system boots (with and without IPL) > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Thursday, May 9, 2019 6:23 PM, John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx> wrote: > >> Hello! >> >> I just uploaded updated installation images 2019-05-09 for the >> following Debian Ports architectures: >> >> - alpha >> - hppa >> - ia64 >> - m68k >> - powerpc >> - ppc64 >> - sh4 >> - sparc64 >> >> I uploaded both CD images [1] as well as netboot images [2]. >> >> Please test those images and report back over the mailing list for >> the corresponding architecture. >> >> Known issues: .. >> >> - hppa >> - No known issues and changes. ... >> >> when installing over a serial console. I also need to know >> what hardware was used, which installation steps (normal >> vs. expert) and which image was used. >> >> I am currently collecting bug reports but cannot push the fixes >> immediately as the imminent Debian Buster release means that >> debian-installer and components are effectively frozen. >> >> Thanks, >> Adrian >> >>> [1] https://cdimage.debian.org/cdimage/ports/2019-05-09/ >>> [2] https://cdimage.debian.org/cdimage/ports/debian-installer/
