On 2019-05-12 9:45 a.m., Carlo Pisani wrote: >> I agree. The memory errors in the PIM dump are recorded by the PDC firmware and they don't >> directly involve the linux drivers. Might be hardware problem. > which kind of error problem? |Memory Error Log Information: Timestamp = Sat May 11 11:37:53 GMT 2019 (20:19:05:11:11:37:53) '9000/785 B,C,J Workstation Memory Error Log', rev 0, 64 bytes: This log displays the contents of memory specific registers when the HPMC occurred. If there are multiple memory errors, the order they are listed is not indicative of the order they occurred. Trans Addr Memory Error Type(s) OV MID ID par CP DIMM Runway Address -------------------- -- --- ----- ---- -- ------- ------------------- 1) Correctable Mem 1 0x6 0x a na na 05 0x 0036c76b40 Syndrome ------------------ 1) 0x94 <Press any key to continue (q to quit)> I/O Module Error Log Information: Timestamp = Sat May 11 11:37:53 GMT 2019 (20:19:05:11:11:37:53) '9000/785 B,C,J Workstation IO Error Log', rev 0, 228 bytes: Rope Word1 Word2 Word3 ------ ------------ ------------ 0 0x00000000 0x0e0cc009 0x00000000fed30048 1 0x00000000 0x1e0cc009 0x00000000fed32048 2 ---------- 0x2e0cc009 ------------------ 3 ---------- 0x3e0cc009 ------------------ 4 0x00000000 0x4e0cc009 0x00000000fed38048 5 ---------- 0x5e0cc009 ------------------ 6 0x00000000 0x6e0cc2a9 0x00000000fed3c048 7 ---------- 0x7e0cc009 ------------------ | > > those two cards have no problem when tested on PowerMac-G4 > and we have a second C3600, reporting the same behavior > > so, supposing those cards are OK, and C3600s are OK > what might be wrong about the hardware? > -- John David Anglin dave.anglin@xxxxxxxx
