Leave the way of zero-out to the compiler's decision; the compiler
may know a more optimized way than calling memset().
It may end up with memset() for big structures like this after all,
but the code will be cleaner at least.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_acorn.c | 3 +--
drivers/tty/serial/8250/8250_core.c | 4 +---
drivers/tty/serial/8250/8250_em.c | 3 +--
drivers/tty/serial/8250/8250_gsc.c | 3 +--
drivers/tty/serial/8250/8250_hp300.c | 11 +++--------
drivers/tty/serial/8250/8250_lpc18xx.c | 4 +---
drivers/tty/serial/8250/8250_lpss.c | 4 +---
drivers/tty/serial/8250/8250_mid.c | 4 +---
drivers/tty/serial/8250/8250_moxa.c | 4 +---
drivers/tty/serial/8250/8250_of.c | 4 ++--
drivers/tty/serial/8250/8250_omap.c | 3 +--
drivers/tty/serial/8250/8250_pci.c | 3 +--
drivers/tty/serial/8250/8250_pnp.c | 3 +--
drivers/tty/serial/8250/8250_uniphier.c | 4 +---
drivers/tty/serial/8250/serial_cs.c | 3 +--
15 files changed, 18 insertions(+), 42 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index 402dfdd..f49acafc 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -43,7 +43,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct serial_card_info *info;
struct serial_card_type *type = id->data;
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
unsigned long bus_addr;
unsigned int i;
@@ -62,7 +62,6 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
ecard_set_drvdata(ec, info);
- memset(&uart, 0, sizeof(struct uart_8250_port));
uart.port.irq = ec->irq;
uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
uart.port.uartclk = type->uartclk;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 61569a7..27c18c9 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -804,11 +804,9 @@ EXPORT_SYMBOL(serial8250_resume_port);
static int serial8250_probe(struct platform_device *dev)
{
struct plat_serial8250_port *p = dev_get_platdata(&dev->dev);
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
int ret, i, irqflag = 0;
- memset(&uart, 0, sizeof(uart));
-
if (share_irqs)
irqflag = IRQF_SHARED;
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 0b63812..5deabaf 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -92,7 +92,7 @@ static int serial8250_em_probe(struct platform_device *pdev)
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct serial8250_em_priv *priv;
- struct uart_8250_port up;
+ struct uart_8250_port up = {};
int ret;
if (!regs || !irq) {
@@ -110,7 +110,6 @@ static int serial8250_em_probe(struct platform_device *pdev)
return PTR_ERR(priv->sclk);
}
- memset(&up, 0, sizeof(up));
up.port.mapbase = regs->start;
up.port.irq = irq->start;
up.port.type = PORT_UNKNOWN;
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index b1e6ae9..5366e97 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -26,7 +26,7 @@
static int __init serial_init_chip(struct parisc_device *dev)
{
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
unsigned long address;
int err;
@@ -53,7 +53,6 @@ static int __init serial_init_chip(struct parisc_device *dev)
if (dev->id.sversion != 0x8d)
address += 0x800;
- memset(&uart, 0, sizeof(uart));
uart.port.iotype = UPIO_MEM;
/* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */
uart.port.uartclk = (dev->id.sversion != 0xad) ?
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index 38166db..6fd6414 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -90,9 +90,7 @@ extern int hp300_uart_scode;
int __init hp300_setup_serial_console(void)
{
int scode;
- struct uart_port port;
-
- memset(&port, 0, sizeof(port));
+ struct uart_port port = {};
if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX)
return 0;
@@ -156,7 +154,7 @@ int __init hp300_setup_serial_console(void)
static int hpdca_init_one(struct dio_dev *d,
const struct dio_device_id *ent)
{
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
int line;
#ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -165,7 +163,6 @@ static int hpdca_init_one(struct dio_dev *d,
return 0;
}
#endif
- memset(&uart, 0, sizeof(uart));
/* Memory mapped I/O */
uart.port.iotype = UPIO_MEM;
@@ -205,7 +202,7 @@ static int __init hp300_8250_init(void)
#ifdef CONFIG_HPAPCI
int line;
unsigned long base;
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
struct hp300_port *port;
int i;
#endif
@@ -243,8 +240,6 @@ static int __init hp300_8250_init(void)
if (!port)
return -ENOMEM;
- memset(&uart, 0, sizeof(uart));
-
base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
/* Memory mapped I/O */
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 99cd478..e00115b 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -105,7 +105,7 @@ static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value)
static int lpc18xx_serial_probe(struct platform_device *pdev)
{
struct lpc18xx_uart_data *data;
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
struct resource *res;
int irq, ret;
@@ -121,8 +121,6 @@ static int lpc18xx_serial_probe(struct platform_device *pdev)
return -EINVAL;
}
- memset(&uart, 0, sizeof(uart));
-
uart.port.membase = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (!uart.port.membase)
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 58cbb30..cba46dd 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -275,7 +275,7 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
struct lpss8250 *lpss;
int ret;
@@ -289,8 +289,6 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
lpss->board = (struct lpss8250_board *)id->driver_data;
- memset(&uart, 0, sizeof(struct uart_8250_port));
-
uart.port.dev = &pdev->dev;
uart.port.irq = pdev->irq;
uart.port.private_data = lpss;
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index ac013edf..8dd68c9 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -241,7 +241,7 @@ static int mid8250_dma_setup(struct mid8250 *mid, struct uart_8250_port *port)
static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
struct mid8250 *mid;
unsigned int bar;
int ret;
@@ -259,8 +259,6 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
mid->board = (struct mid8250_board *)id->driver_data;
bar = FL_GET_BASE(mid->board->flags);
- memset(&uart, 0, sizeof(struct uart_8250_port));
-
uart.port.dev = &pdev->dev;
uart.port.irq = pdev->irq;
uart.port.private_data = mid;
diff --git a/drivers/tty/serial/8250/8250_moxa.c b/drivers/tty/serial/8250/8250_moxa.c
index 26eb539..fe5179b 100644
--- a/drivers/tty/serial/8250/8250_moxa.c
+++ b/drivers/tty/serial/8250/8250_moxa.c
@@ -49,7 +49,7 @@ static struct moxa8250_board moxa8250_boards[] = {
static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
struct moxa8250_board *brd;
void __iomem *ioaddr;
resource_size_t baseaddr;
@@ -69,8 +69,6 @@ static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (!brd)
return -ENOMEM;
- memset(&uart, 0, sizeof(struct uart_8250_port));
-
uart.port.dev = &pdev->dev;
uart.port.irq = pdev->irq;
uart.port.uartclk = MOXA_BASE_BAUD * 16;
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index d25ab1c..1fae126 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -196,8 +196,8 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
case PORT_8250 ... PORT_MAX_8250:
{
u32 tx_threshold;
- struct uart_8250_port port8250;
- memset(&port8250, 0, sizeof(port8250));
+ struct uart_8250_port port8250 = {};
+
port8250.port = port;
if (port.fifosize)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 61ad6c3..ac88bf9 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1093,7 +1093,7 @@ static int omap8250_probe(struct platform_device *pdev)
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct omap8250_priv *priv;
- struct uart_8250_port up;
+ struct uart_8250_port up = {};
int ret;
void __iomem *membase;
@@ -1111,7 +1111,6 @@ static int omap8250_probe(struct platform_device *pdev)
if (!membase)
return -ENODEV;
- memset(&up, 0, sizeof(up));
up.port.dev = &pdev->dev;
up.port.mapbase = regs->start;
up.port.membase = membase;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index aa0166b..5e45704 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -3834,7 +3834,7 @@ serial_pci_matches(const struct pciserial_board *board,
struct serial_private *
pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
{
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
struct serial_private *priv;
struct pci_serial_quirk *quirk;
int rc, nr_ports, i;
@@ -3874,7 +3874,6 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
priv->dev = dev;
priv->quirk = quirk;
- memset(&uart, 0, sizeof(uart));
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
uart.port.uartclk = board->base_baud * 16;
uart.port.irq = get_pci_irq(dev, board);
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 34f05ed..0891a6f 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -439,7 +439,7 @@ static int serial_pnp_guess_board(struct pnp_dev *dev)
static int
serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
- struct uart_8250_port uart, *port;
+ struct uart_8250_port uart = {}, *port;
int ret, line, flags = dev_id->driver_data;
if (flags & UNKNOWN_DEV) {
@@ -448,7 +448,6 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
return ret;
}
- memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 746680e..d7cfdfd 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -196,7 +196,7 @@ static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port,
static int uniphier_uart_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct uart_8250_port up;
+ struct uart_8250_port up = {};
struct uniphier8250_priv *priv;
struct resource *regs;
void __iomem *membase;
@@ -223,8 +223,6 @@ static int uniphier_uart_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
- memset(&up, 0, sizeof(up));
-
ret = uniphier_of_serial_setup(dev, &up.port, priv);
if (ret < 0)
return ret;
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 933c268..348f897 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -342,10 +342,9 @@ static void serial_detach(struct pcmcia_device *link)
static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
unsigned int iobase, int irq)
{
- struct uart_8250_port uart;
+ struct uart_8250_port uart = {};
int line;
- memset(&uart, 0, sizeof(uart));
uart.port.iobase = iobase;
uart.port.irq = irq;
uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
