> I think Debian 5 will not even install on the C8000..
>
Correct: the boot DVD hang after a while.
> But you didn't gave any information which kernel version you are using ?
>
> This kernel should be pretty stable on the C8000:
> http://backup.parisc-linux.org/kernel/linux-image-4.2.0-1-parisc64-smp_4.2.6-3+b3_hppa.deb
>
The Debian 8.0 ( "debian-8.0-hppa-CD-1.iso") has configured this kernel:
Linux version 3.16.0-4-parisc64-smp (debian-kernel@xxxxxxxxxxxxxxxx)
(gcc version 4.8.4 (GCC) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
I'm attaching the full set of booting message.
Probably you have a more recent kernel because AFTER the installation
you have updated the full distro with more recent packages.
Unfortunately, with this configuration, I can't boot.
I would like to avoid the de-installation of the second processor.
Thanks in advance for your help.
Simone Mannori - Italy
T_LOAD_IPL_OTHR_PATH
<Cpu0> 160012cb00e00000 0000000000000000 CC_MPS_SLAVE_WAKEUP_ALL
<Cpu0> 160012cd00e00000 0000000000000002 CC_MPS_SLAVE_WAKEUP
<Cpu0> 080012ce00e00000 000000f0f0d07860 CC_MPS_SLAVE_WAKE_FUNC
<Cpu2> 160012d502e00000 0200020000000017 CC_MPS_SLAVE_AWAKE
<Cpu0> 160012cd00e00000 0000000000000003 CC_MPS_SLAVE_WAKEUP
<Cpu2> 080012d602e00000 000000f0f0d07860 CC_MPS_SLAVE_WAKE_ADDR
<Cpu0> 080012ce00e00000 000000f0f0d07860 CC_MPS_SLAVE_WAKE_FUNC
<Cpu3> 160012d503e00000 0300020000000017 CC_MPS_SLAVE_AWAKE
<Cpu2> 0300096302e00000 0000000008000008 CC_BOOT_MEM_CPU_RENDEZVOUS
<Cpu0> 160012cd00e00000 0000000000000001 CC_MPS_SLAVE_WAKEUP
<Cpu3> 080012d603e00000 000000f0f0d07860 CC_MPS_SLAVE_WAKE_ADDR
<Cpu2> 160012d302e00000 0200900000000000 CC_MPS_SLAVE_SLEEPING
<Cpu0> 080012ce00e00000 000000f0f0d07860 CC_MPS_SLAVE_WAKE_FUNC
<Cpu1> 160012d501e00000 0100020000000017 CC_MPS_SLAVE_AWAKE
<Cpu3> 0300096303e00000 0000000008000008 CC_BOOT_MEM_CPU_RENDEZVOUS
<Cpu2> 080012d402e00000 000000f0f0d07dc0 CC_MPS_SLAVE_SLEEP_ADDR
<Cpu0> 0000097c00e00000 00009000010000ff CC_BOOT_MONARCH_SLAVE_CHECK
<Cpu1> 080012d601e00000 000000f0f0d07860 CC_MPS_SLAVE_WAKE_ADDR
<Cpu3> 160012d303e00000 0300900000000000 CC_MPS_SLAVE_SLEEPING
<Cpu0> 160012cf00e00000 000090000100000e CC_MPS_CPU_WAITING
<Cpu1> 0300096301e00000 0000000008000008 CC_BOOT_MEM_CPU_RENDEZVOUS
<Cpu3> 080012d403e00000 000000f0f0d07dc0 CC_MPS_SLAVE_SLEEP_ADDR
<Cpu1> 160012d301e00000 0100900000000000 CC_MPS_SLAVE_SLEEPING
<Cpu1> 080012d401e00000 000000f0f0d07dc0 CC_MPS_SLAVE_SLEEP_ADDR
<Cpu0> 160012d000e00000 0000900001000000 CC_MPS_CPU_WAIT_OVER
HARD Booted.
<Cpu0> 0000109800e00000 0000000000000000 CC_BOOT_LAUNCH_IPL_OTHR
<Cpu0> 0100142900e00000 fffffff0f0e0ac00 CC_CPU_INTRIGUE_LDB
<Cpu0> 3400082100e00000 0000000000000001 CC_BOOT_BOOT_COMPLETE
palo ipl 1.95 root@mkhppa3 Thu Apr 17 20:15:17 UTC 2014
Skipping extended partition 6 - beyond reach of IPL
Partition Start(MB) End(MB) Id Type
1 2 38 f0 Palo
2 39 276 83 ext2
5 278 67415 83 ext2
PALO(F0) partition contains:
0/vmlinux64 11930248(0) bytes @ 0x140000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: 'root=UUID=ad1c7626-bec2-4b33-92f7-51b3de242fb0 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux'
Selected kernel: /vmlinux from partition 2
Selected ramdisk: /initrd.img from partition 2
ELF64 executable
Entry 00100000 first 00100000 n 2
Segment 0 load 00100000 size 228648 mediaptr 0x1000
Segment 1 load 00138000 size 9425024 mediaptr 0x39000
Loading ramdisk 16933825 bytes @ 3efc8000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-parisc64-smp (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.8.4 (GCC) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
[ 0.000000] unwind_init: start = 0x40877d58, end = 0x408bdf28, entries = 17949
[ 0.000000] FP[0] enabled: Rev 1 Model 20
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] Default page size is 4KB.
[ 0.000000] bootconsole [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: 64 bit PAT.
[ 0.000000] model 000088b0 00000491 00000000 00000002 56fac74098c05ffd 100000f0 00000008 000000b2 000000b2
[ 0.000000] vers 00000301
[ 0.000000] CPUID vers 20 rev 4 (0x00000284)
[ 0.000000] capabilities 0x35
[ 0.000000] model 9000/785/C8000
[ 0.000000] parisc_cache_init: Only equivalent aliasing supported!
[ 0.000000] Memory Ranges:
[ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB
[ 0.000000] 1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB
[ 0.000000] Total Memory: 4094 MB
[ 0.000000] initrd: 7efc8000-7ffee3c1
[ 0.000000] initrd: reserving 3efc8000-3ffee3c1 (mem_max ffe00000)
[ 0.000000] PERCPU: Embedded 14 pages/cpu @0000000041f7a000 s27072 r8192 d22080 u57344
[ 0.000000] SMP: bootstrap CPU ID is 0
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 1033735
[ 0.000000] Kernel command line: root=UUID=ad1c7626-bec2-4b33-92f7-51b3de242fb0 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 4093876K/4192256K available (5512K kernel code, 1817K rwdata, 1091K rodata, 368K init, 636K bss, 98380K reserved)
[ 0.000000] virtual kernel memory layout:
0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB)
0.000000] memory : 0x0000000040000000 - 0x000000413fe00000 (266238 MB)
0.000000] .init : 0x0000000040100000 - 0x000000004015c000 ( 368 kB)
0.000000] .data : 0x00000000406be000 - 0x0000000040995470 (2909 kB)
0.000000] .text : 0x000000004015c000 - 0x00000000406be000 (5512 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 160x64
[ 0.060000] Calibrating delay loop... 1988.60 BogoMIPS (lpj=3977216)
[ 0.156000] pid_max: default: 32768 minimum: 301
[ 0.216000] Security Framework initialized
[ 0.268000] AppArmor: AppArmor disabled by boot time parameter
[ 0.348000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.436000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.524000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.616000] Initializing cgroup subsys memory
[ 0.676000] Initializing cgroup subsys devices
[ 0.732000] Initializing cgroup subsys freezer
[ 0.792000] Initializing cgroup subsys net_cls
[ 0.852000] Initializing cgroup subsys blkio
[ 0.908000] Initializing cgroup subsys perf_event
[ 0.968000] Initializing cgroup subsys net_prio
[ 1.032000] Brought up 1 CPUs
[ 1.068000] devtmpfs: initialized
[ 1.116000] NET: Registered protocol family 16
[ 1.176000] EISA bus registered
[ 1.216000] Searching for devices...
[ 1.376000] Found devices:
[ 1.412000] 1. Crestone Peak Fast? at 0xfffffffffe780000 [128] { 0, 0x0, 0x88b, 0x00004 }
[ 1.520000] 2. Crestone Peak Fast? at 0xfffffffffe781000 [129] { 0, 0x0, 0x88b, 0x00004 }
[ 1.628000] 3. Crestone Peak Fast? at 0xfffffffffe798000 [152] { 0, 0x0, 0x88b, 0x00004 }
[ 1.736000] 4. Crestone Peak Fast? at 0xfffffffffe799000 [153] { 0, 0x0, 0x88b, 0x00004 }
[ 1.844000] 5. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x0b6, 0x00009 }
[ 1.936000] 6. Pluto BC McKinley Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x880, 0x0000c }
[ 2.044000] 7. Mercury PCI Bridge at 0xfffffffffed20000 [0/0] { 13, 0x0, 0x783, 0x0000a }
[ 2.152000] 8. Mercury PCI Bridge at 0xfffffffffed24000 [0/2] { 13, 0x0, 0x783, 0x0000a }
[ 2.260000] 9. Mercury PCI Bridge at 0xfffffffffed26000 [0/3] { 13, 0x0, 0x783, 0x0000a }
[ 2.368000] 10. Quicksilver AGP Bridge at 0xfffffffffed28000 [0/4] { 13, 0x0, 0x784, 0x0000a }
[ 2.484000] 11. BMC IPMI Mgmt Ctlr at 0xfffffff0f05b0000 [16] { 15, 0x0, 0x004, 0x000c0 }
[ 2.592000] 12. Crestone Peak Fast? Core RS-232 at 0xfffffff0f05e0000 [17] { 10, 0x0, 0x077, 0x000ad }
[ 2.712000] 13. Crestone Peak Fast? Core RS-232 at 0xfffffff0f05e2000 [18] { 10, 0x0, 0x077, 0x000ad }
[ 2.836000] Enabling PDC_PAT chassis codes support v0.05
<Cpu0> 38000c6400e00000 a0e008101100c000 CC_PAT_ENCODED_FIELD_MAJOR_FWD_PROG
<Cpu0> 36000c6a00e00000 0000000000000420 CC_PAT_DATA_FIELD_MAJOR_FWD_PROG
[ 3.740000] Releasing cpu 1 now, hpa=fffffffffe781000
<Cpu1> 0000099101e00000 0000000000000000 CC_BOOT_OS_RENDEZVOUS
<Cpu1> 0100142901e00000 fffffff0f0e0ac00 CC_CPU_INTRIGUE_LDB
[ 4.168000] FP[1] enabled: Rev 1 Model 20
[ 4.176000] Releasing cpu 2 now, hpa=fffffffffe798000
<Cpu2> 0000099102e00000 0000000000000000 CC_BOOT_OS_RENDEZVOUS
<Cpu2> 0100142902e00000 fffffff0f0e0ac00 CC_CPU_INTRIGUE_LDB
[ 4.672000] FP[2] enabled: Rev 1 Model 20
[ 4.680000] Releasing cpu 3 now, hpa=fffffffffe799000
<Cpu3> 0000099103e00000 0000000000000000 CC_BOOT_OS_RENDEZVOUS
<Cpu3> 0100142903e00000 fffffff0f0e0ac00 CC_CPU_INTRIGUE_LDB
[ 5.176000] FP[3] enabled: Rev 1 Model 20
[ 5.180000] CPU(s): 4 out of 4 PA8800 (Mako) at 1000.000000 MHz online
[ 5.324000] Setting cache flush threshold to 2000000 (4 CPUs online)
[ 5.552000] SBA found Pluto 2.3 at 0xfffffffffed00000
[ 5.724000] sba_ioc_init_pluto: reserving 512Mb of IOVA space for agpgart
[ 5.836000] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000
[ 5.952000] LBA: lmmio_space [0xffffffff80000000-0xffffffff9fffffff] - new
[ 6.068000] LBA 0:0: PCI host bridge to bus 0000:00
[ 6.132000] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 6.216000] pci_bus 0000:00: root bus resource [mem 0xffffffff80000000-0xffffffff9fffffff] (bus address [0x80000000-0x9fffffff])
[ 6.368000] pci_bus 0000:00: root bus resource [mem 0xffffff0000000000-0xffffff0fffffffff]
[ 6.476000] pci_bus 0000:00: root bus resource [bus 00-07]
[ 6.568000] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000
[ 6.712000] LBA 0:2: PCI host bridge to bus 0000:40
[ 6.780000] pci_bus 0000:40: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
[ 6.896000] pci_bus 0000:40: root bus resource [mem 0xffffffffa0000000-0xffffffffafffffff] (bus address [0xa0000000-0xafffffff])
[ 7.048000] pci_bus 0000:40: root bus resource [mem 0xffffff2000000000-0xffffff2fffffffff]
[ 7.160000] pci_bus 0000:40: root bus resource [bus 40-47]
[ 7.252000] Mercury version TR3.2 (0x32) found at 0xfffffffffed26000
[ 7.396000] LBA 0:3: PCI host bridge to bus 0000:60
[ 7.460000] pci_bus 0000:60: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
[ 7.580000] pci_bus 0000:60: root bus resource [mem 0xffffffffb0000000-0xffffffffbfffffff] (bus address [0xb0000000-0xbfffffff])
[ 7.732000] pci_bus 0000:60: root bus resource [mem 0xffffff3000000000-0xffffff3fffffffff]
[ 7.840000] pci_bus 0000:60: root bus resource [bus 60-67]
[ 7.936000] Quicksilver version TR1.0 (0x10) found at 0xfffffffffed28000
[ 8.056000] LBA: lmmio_space [0xffffffffc0000000-0xffffffffdfffffff] - new
[ 8.176000] LBA 0:4: PCI host bridge to bus 0000:80
[ 8.240000] pci_bus 0000:80: root bus resource [io 0x30000-0x3ffff] (bus address [0x0000-0xffff])
[ 8.356000] pci_bus 0000:80: root bus resource [mem 0xffffffffc0000000-0xffffffffdfffffff] (bus address [0xc0000000-0xdfffffff])
[ 8.512000] pci_bus 0000:80: root bus resource [mem 0xffffff4000000000-0xffffff4fffffffff]
[ 8.620000] pci_bus 0000:80: root bus resource [bus 80-87]
<Cpu1> 0300108201e00000 0000000000000000 CC_PROCS_ENTRY_IN
<Cpu1> 0300030701e00000 0000000000000000 CC_SYSTEM_STATE_RUNNING_OK
[ 9.172000] powersw: Soft power switch at 0xfffffff0f042e278 enabled.
[ 9.272000] vgaarb: setting as boot device: PCI:0000:80:00.0
[ 9.272000] vgaarb: device added: PCI:0000:80:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 9.452000] vgaarb: loaded
[ 9.488000] vgaarb: bridge control possible 0000:80:00.0
[ 9.564000] NET: Registered protocol family 2
[ 9.620000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 9.716000] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 9.804000] TCP: Hash tables configured (established 32768 bind 32768)
[ 9.892000] TCP: reno registered
[ 9.932000] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 10.012000] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 10.100000] NET: Registered protocol family 1
[ 10.220000] Unpacking initramfs...
[ 11.112000] Freeing initrd memory: 16536K (000000007efc8000 - 000000007ffee000)
[ 11.212000] Chassis warnings not supported.
[ 11.268000] Performance monitoring counters enabled for Crestone Peak Fast?
[ 11.360000] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 11.444000] audit: initializing netlink subsys (disabled)
[ 11.512000] audit: type=2000 audit(1459445610.512:1): initialized
[ 11.596000] zbud: loaded
[ 11.628000] VFS: Disk quotas dquot_6.5.2
[ 11.680000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 11.764000] msgmni has been set to 8028
[ 11.860000] alg: No test for stdrng (krng)
[ 11.912000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 12.012000] io scheduler noop registered
[ 12.064000] io scheduler deadline registered
[ 12.120000] io scheduler cfq registered (default)
[ 12.184000] PDC Stable Storage facility v0.30
[ 12.288000] STI GSC/PCI core graphics driver Version 0.9b
[ 12.360000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 12.464000] console [ttyS0] disabled
[ 12.532000] 17: ttyS0 at MMIO 0xfffffff0f05e0800 (irq = 74, base_baud = 115200) is a 16550A
[ 12.640000] console [ttyS0] enabled
[ 12.640000] console [ttyS0] enabled
[ 12.728000] bootconsole [ttyB0] disabled
[ 12.728000] bootconsole [ttyB0] disabled
[ 12.868000] 18: ttyS1 at MMIO 0xfffffff0f05e2800 (irq = 75, base_baud = 115200) is a 16550A
[ 12.968000] Linux agpgart interface v0.103
[ 13.020000] quicksilver: IO PDIR shared with sba_iommu
[ 13.104000] (null): AGP aperture is 512M @ 0x60000000
[ 13.164000] [drm] Initialized drm 1.1.0 20060810
[ 13.220000] mousedev: PS/2 mouse device common for all mice
[ 13.292000] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 13.380000] ledtrig-cpu: registered to indicate activity on CPUs
[ 13.452000] TCP: cubic registered
[ 13.492000] NET: Registered protocol family 10
[ 13.544000] mip6: Mobile IPv6
[ 13.580000] NET: Registered protocol family 17
[ 13.620000] random: nonblocking pool is initialized
[ 13.692000] mpls_gso: MPLS GSO support
[ 13.740000] registered taskstats version 1
[ 13.796000] rtc-generic rtc-generic: setting system clock to 2016-03-31 17:33:32 UTC (1459445612)
[ 13.924000] Freeing unused kernel memory: 368K (0000000040100000 - 000000004015c000)
<Cpu1> 38000c6401e00000 a0e008101100c001 CC_PAT_ENCODED_FIELD_MAJOR_FWD_PROG
<Cpu1> 36000c6a01e00000 0000000000000420 CC_PAT_DATA_FIELD_MAJOR_FWD_PROG
Loading, please wait...
[ 14.732000] systemd-udevd[71]: starting version 215
[ 15.348000] SCSI subsystem initialized
[ 15.676000] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 15.688000] usbcore: registered new interface driver usbfs
[ 15.688000] usbcore: registered new interface driver hub
[ 15.912000] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 16.104000] usbcore: registered new device driver usb
[ 16.120000] Fusion MPT base driver 3.04.20
[ 16.120000] Copyright (c) 1999-2008 LSI Corporation
[ 16.724000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.276000] e1000 0000:60:03.0 eth0: (PCI:33MHz:32-bit) 00:13:21:1a:36:cf
[ 17.276000] ehci-pci: EHCI PCI platform driver
[ 17.448000] e1000 0000:60:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 17.572000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.676000] sil680: 133MHz clock.
[ 17.748000] scsi0 : pata_sil680
[ 17.948000] Fusion MPT SPI Host driver 3.04.20
[ 18.012000] scsi1 : pata_sil680
[ 18.064000] mptbase: ioc0: Initiating bringup
[ 18.064000] ata1: PATA max UDMA/133 cmd 0x26058 ctl 0x26064 bmdma 0x26040 irq 71
[ 18.064000] ata2: PATA max UDMA/133 cmd 0x26050 ctl 0x26060 bmdma 0x26048 irq 71
[ 18.312000] ehci-pci 0000:60:01.2: EHCI Host Controller
[ 18.380000] ehci-pci 0000:60:01.2: new USB bus registered, assigned bus number 1
[ 18.472000] ehci-pci 0000:60:01.2: irq 70, io mem 0xffffffffb00a1000
[ 18.548000] ata2.00: ATAPI: TSSTcorpDVD-ROM SH-D162D, SB00, max UDMA/33
[ 18.568000] ehci-pci 0000:60:01.2: USB 2.0 started, EHCI 0.95
[ 18.568000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 18.568000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.568000] usb usb1: Product: EHCI Host Controller
[ 18.568000] usb usb1: Manufacturer: Linux 3.16.0-4-parisc64-smp ehci_hcd
[ 18.568000] usb usb1: SerialNumber: 0000:60:01.2
[ 18.568000] hub 1-0:1.0: USB hub found
[ 18.568000] hub 1-0:1.0: 5 ports detected
[ 18.820000] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 19.252000] ata2.00: configured for UDMA/33
[ 19.356000] scsi2 : ioc0: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=66
[ 19.480000] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D162D SB00 PQ: 0 ANSI: 5
[ 19.664000] ohci-pci: OHCI PCI platform driver
[ 19.760000] ohci-pci 0000:60:01.0: OHCI PCI host controller
[ 19.836000] ohci-pci 0000:60:01.0: new USB bus registered, assigned bus number 2
[ 19.928000] ohci-pci 0000:60:01.0: irq 68, io mem 0xffffffffb00a3000
[ 20.156000] mptbase: ioc1: Initiating bringup
[ 20.584000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.664000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.696000] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 20.824000] usb usb2: Product: OHCI PCI host controller
[ 20.888000] usb usb2: Manufacturer: Linux 3.16.0-4-parisc64-smp ohci_hcd
[ 20.968000] usb usb2: SerialNumber: 0000:60:01.0
[ 21.024000] hub 2-0:1.0: USB hub found
[ 21.068000] hub 2-0:1.0: 3 ports detected
[ 21.156000] ohci-pci 0000:60:01.1: OHCI PCI host controller
[ 21.212000] scsi3 : ioc1: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=67
[ 21.320000] ohci-pci 0000:60:01.1: new USB bus registered, assigned bus number 3
[ 21.416000] ohci-pci 0000:60:01.1: irq 69, io mem 0xffffffffb00a2000
[ 21.676000] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 21.748000] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 21.920000] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 22.240000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 22.320000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 22.408000] usb usb3: Product: OHCI PCI host controller
[ 22.468000] usb usb3: Manufacturer: Linux 3.16.0-4-parisc64-smp ohci_hcd
[ 22.548000] usb usb3: SerialNumber: 0000:60:01.1
[ 22.604000] hub 3-0:1.0: USB hub found
[ 22.620000] scsi 2:0:5:0: Direct-Access HP 73.4G ST373207LW HPC1 PQ: 0 ANSI: 3
[ 22.620000] scsi target2:0:5: Beginning Domain Validation
[ 22.640000] scsi target2:0:5: Ending Domain Validation
[ 22.640000] scsi target2:0:5: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 22.992000] hub 3-0:1.0: 2 ports detected
[ 24.892000] scsi 2:0:5:0: Attached scsi generic sg1 type 0
[ 25.392000] sd 2:0:5:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
[ 25.484000] sd 2:0:5:0: [sda] Write Protect is off
[ 25.544000] sd 2:0:5:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 25.700000] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 25.780000] sd 2:0:5:0: [sda] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Checking root file system ... fsck from util-linux 2.25.2
/dev/sda5: recovering journal
/dev/sda5: clean, 122635/4300800 files, 932228/17187328 blocks
done.
[ 27.416000] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 28.344000] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 28.504000] systemd[1]: Detected architecture 'parisc64'.
Welcome to [1mDebian GNU/Linux 8 (jessie)[0m!
[ 28.916000] systemd[1]: Inserted module 'autofs4'
[ 28.988000] systemd[1]: Set hostname to <blsw>.
[ 29.064000] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
[ 32.132000] Backtrace:
[ 32.132000] [<00000000401fcab4>] handle_percpu_irq+0xac/0xe8
[ 32.132000] [<00000000401f6bbc>] generic_handle_irq+0x4c/0x68
[ 32.132000] [<00000000401612a4>] call_on_stack+0x18/0x24
[ 32.132000] [<000000004017370c>] execute_on_irq_stack+0x5c/0xa8
[ 32.132000] [<000000004015fe5c>] _switch_to_ret+0xd9c/0xf40
[ 32.132000] [<00000000401604f4>] intr_save+0x18/0x11c
[ 32.132000] [<0000000040160820>] dtlb_miss_20w+0xc8/0x108
[ 32.132000] [<0000000040160568>] intr_save+0x8c/0x11c
[ 32.132000] [<000000004015fee8>] _switch_to_ret+0xe28/0xf40
[ 32.132000] [<000000004015e9a4>] end_linux_gateway_page+0x9a4/0x1000
[ 32.132000] [<000000004015de60>] cas2_end+0x85c/0x9fc
[ 32.132000] [<00000000401604a4>] intr_extint+0x20c/0x244
[ 32.132000] [<000000004015dbe8>] cas2_end+0x5e4/0x9fc
[ 32.132000] [<000000004015dd50>] cas2_end+0x74c/0x9fc
[ 32.132000] [<00000000405a8ea4>] __sk_run_filter+0x156c/0x1738
[ 32.132000]
[ 32.132000]
[ 32.132000] Bad Address (null pointer deref?): Code=26 regs=0000000041f7a340 (Addr=0000000000000000)
[ 32.132000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-4-parisc64-smp #1 Debian 3.16.7-ckt4-3
[ 32.132000] task: 0000000040984e18 ti: 00000000408c8000 task.ti: 00000000408c8000
[ 32.132000]
[ 32.132000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[ 32.132000] PSW: 00001000000001001111111100001110 Not tainted
[ 32.132000] r00-03 000000ff0804ff0e 000000004085e2a0 00000000401fcab4 0000000041f7a250
[ 32.132000] r04-07 00000000408462a0 0000000000000000 0000000000000000 0000000000000000
[ 32.132000] r08-11 0000000041f7a310 000000000000004a 00000000408d0b80 000000000000004a
[ 32.132000] r12-15 000000004085e2a0 0000000000000001 00000000408762a0 0000000000000001
[ 32.132000] r16-19 000000004085e2a0 00000000cf6faff5 00000000ff6fdf79 0000000001e25000
[ 32.132000] r20-23 00000000408ec678 ffdfffffffffffff fff0000000000000 0000000041f7e020
[ 32.132000] r24-27 0000000041f7a040 0000000000000000 00000000408d0b80 00000000408462a0
[ 32.132000] r28-31 ffd0000000000000 0000000041f7a220 0000000041f7a340 0020000000000000
[ 32.132000] sr00-03 0000000000046000 0000000000000000 0000000000000000 0000000000046000
[ 32.132000] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 32.132000]
[ 32.132000] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401f7944 00000000401f7948
[ 32.132000] IIR: 0ca010dc ISR: 0000000000000000 IOR: 0000000000000000
[ 32.132000] CPU: 0 CR30: 00000000408c8000 CR31: fffffff0f0e034e0
[ 32.132000] ORIG_R28: 000000000000075f
[ 32.132000] IAOQ[0]: handle_irq_event_percpu+0x8c/0x250
[ 32.132000] IAOQ[1]: handle_irq_event_percpu+0x90/0x250
[ 32.132000] RP(r2): handle_percpu_irq+0xac/0xe8
[ 32.132000] Backtrace:
[ 32.132000] [<00000000401fcab4>] handle_percpu_irq+0xac/0xe8
[ 32.132000] [<00000000401f6bbc>] generic_handle_irq+0x4c/0x68
[ 32.132000] [<00000000401612a4>] call_on_stack+0x18/0x24
[ 32.132000] [<000000004017370c>] execute_on_irq_stack+0x5c/0xa8
[ 32.132000] [<000000004015fe5c>] _switch_to_ret+0xd9c/0xf40
[ 32.132000] [<00000000401604f4>] intr_save+0x18/0x11c
[ 32.132000] [<0000000040160820>] dtlb_miss_20w+0xc8/0x108
[ 32.132000] [<0000000040160568>] intr_save+0x8c/0x11c
[ 32.132000] [<000000004015fee8>] _switch_to_ret+0xe28/0xf40
[ 32.132000] [<000000004015e9a4>] end_linux_gateway_page+0x9a4/0x1000
[ 32.132000] [<000000004015de60>] cas2_end+0x85c/0x9fc
[ 32.132000] [<00000000401604a4>] intr_extint+0x20c/0x244
[ 32.132000] [<000000004015dbe8>] cas2_end+0x5e4/0x9fc
[ 32.132000] [<000000004015dd50>] cas2_end+0x74c/0x9fc
[ 32.132000] [<00000000405a8ea4>] __sk_run_filter+0x156c/0x1738
[ 32.132000]
<Cpu0> 0300109100e00000 0000000000000000 CC_PROCS_ENTRY_OUT
[ 32.132000] Kernel panic - not syncing: Bad Address (null pointer deref?)
<Cpu0> 78000c6200e00000 a0e008c01100b009 CC_PAT_ENCODED_FIELD_WARNING
<Cpu0> 76000c6800e00000 0000000000000520 CC_PAT_DATA_FIELD_WARNING
<Cpu0> 0300109100e00000 0000000000000000 CC_PROCS_ENTRY_OUT
[ 32.132000] ---[ end Kernel panic - not syncing: Bad Address (null pointer deref?)
