This patch fixes whitespace errors reported by checkpatch to increase
readability. Main focus is on missing spaces after commas in
function headers and macros (like foo,bar edited to foo, bar).
Signed-off-by: Anton Würfel <anton.wuerfel@xxxxxx>
Signed-off-by: Phillip Raffeck <phillip.raffeck@xxxxxx>
CC: linux-kernel@xxxxxxxxxxxx
---
drivers/tty/serial/8250/8250_accent.c | 2 +-
drivers/tty/serial/8250/8250_acorn.c | 2 +-
drivers/tty/serial/8250/8250_boca.c | 2 +-
drivers/tty/serial/8250/8250_exar_st16c554.c | 2 +-
drivers/tty/serial/8250/8250_fourport.c | 2 +-
drivers/tty/serial/8250/8250_hub6.c | 2 +-
drivers/tty/serial/8250/8250_pci.c | 10 +++--
drivers/tty/serial/8250/8250_port.c | 2 +
drivers/tty/serial/8250/serial_cs.c | 60 ++++++++++++++--------------
9 files changed, 44 insertions(+), 40 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c
index 34b51c6..c480729 100644
--- a/drivers/tty/serial/8250/8250_accent.c
+++ b/drivers/tty/serial/8250/8250_accent.c
@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define PORT(_base,_irq) \
+#define PORT(_base, _irq) \
{ \
.iobase = _base, \
.irq = _irq, \
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index 549aa07..402dfdd 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -70,7 +70,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
uart.port.regshift = 2;
uart.port.dev = &ec->dev;
- for (i = 0; i < info->num_ports; i ++) {
+ for (i = 0; i < info->num_ports; i++) {
uart.port.membase = info->vaddr + type->offset[i];
uart.port.mapbase = bus_addr + type->offset[i];
diff --git a/drivers/tty/serial/8250/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c
index d125dc1..e42a5b5 100644
--- a/drivers/tty/serial/8250/8250_boca.c
+++ b/drivers/tty/serial/8250/8250_boca.c
@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define PORT(_base,_irq) \
+#define PORT(_base, _irq) \
{ \
.iobase = _base, \
.irq = _irq, \
diff --git a/drivers/tty/serial/8250/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c
index bf53aab..999f2d3 100644
--- a/drivers/tty/serial/8250/8250_exar_st16c554.c
+++ b/drivers/tty/serial/8250/8250_exar_st16c554.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define PORT(_base,_irq) \
+#define PORT(_base, _irq) \
{ \
.iobase = _base, \
.irq = _irq, \
diff --git a/drivers/tty/serial/8250/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c
index be15826..9a04a8a 100644
--- a/drivers/tty/serial/8250/8250_fourport.c
+++ b/drivers/tty/serial/8250/8250_fourport.c
@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define PORT(_base,_irq) \
+#define PORT(_base, _irq) \
{ \
.iobase = _base, \
.irq = _irq, \
diff --git a/drivers/tty/serial/8250/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c
index a5c778e..27124e2 100644
--- a/drivers/tty/serial/8250/8250_hub6.c
+++ b/drivers/tty/serial/8250/8250_hub6.c
@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define HUB6(card,port) \
+#define HUB6(card, port) \
{ \
.iobase = 0x302, \
.irq = 3, \
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 4097f3f..ccf43cb 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -850,7 +850,7 @@ static int pci_netmos_init(struct pci_dev *dev)
break;
default:
- if (num_serial == 0 ) {
+ if (num_serial == 0) {
moan_device("unknown NetMos/Mostech device", dev);
}
}
@@ -1198,8 +1198,9 @@ static int pci_quatech_has_qmcr(struct uart_8250_port *port)
static int pci_quatech_test(struct uart_8250_port *port)
{
- u8 reg;
- u8 qopr = pci_quatech_rqopr(port);
+ u8 reg, qopr;
+
+ qopr = pci_quatech_rqopr(port);
pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
reg = pci_quatech_rqopr(port) & 0xC0;
if (reg != QPCR_TEST_GET1)
@@ -1286,6 +1287,7 @@ static int pci_quatech_init(struct pci_dev *dev)
unsigned long base = pci_resource_start(dev, 0);
if (base) {
u32 tmp;
+
outl(inl(base + 0x38) | 0x00002000, base + 0x38);
tmp = inl(base + 0x3c);
outl(tmp | 0x01000000, base + 0x3c);
@@ -4502,7 +4504,7 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
- PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_1152000 },
/*
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 52d82d2..7f3bd7b 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1327,6 +1327,7 @@ static void serial8250_start_tx(struct uart_port *port)
if (up->bugs & UART_BUG_TXEN) {
unsigned char lsr;
+
lsr = serial_in(up, UART_LSR);
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
if (lsr & UART_LSR_THRE)
@@ -1734,6 +1735,7 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
unsigned int tmout;
+
for (tmout = 1000000; tmout; tmout--) {
unsigned int msr = serial_in(up, UART_MSR);
up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 4d180c9..6d7a801 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -28,7 +28,7 @@
and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this
file under either the MPL or the GPL.
-
+
======================================================================*/
#include <linux/module.h>
@@ -257,7 +257,7 @@ static const struct serial_quirk quirks[] = {
};
-static int serial_config(struct pcmcia_device * link);
+static int serial_config(struct pcmcia_device *link);
static void serial_remove(struct pcmcia_device *link)
@@ -309,7 +309,7 @@ static int serial_probe(struct pcmcia_device *link)
dev_dbg(&link->dev, "serial_attach()\n");
/* Create new serial device */
- info = kzalloc(sizeof (*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->p_dev = link;
@@ -339,7 +339,7 @@ static void serial_detach(struct pcmcia_device *link)
/*====================================================================*/
-static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
+static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
unsigned int iobase, int irq)
{
struct uart_8250_port uart;
@@ -600,7 +600,7 @@ static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
}
-static int serial_config(struct pcmcia_device * link)
+static int serial_config(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
int i;
@@ -701,7 +701,7 @@ static const struct pcmcia_device_id serial_ids[] = {
PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
@@ -797,30 +797,30 @@ static const struct pcmcia_device_id serial_ids[] = {
PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+ PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+ PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
/* too generic */
/* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
