Checkpatch complains about incorrect indentation of switch/case statements.
This patch fixes the corresponding warnings. Additionally some indentation
is changed to match the correct format specified in the Linux Kernel
Coding Style.
Signed-off-by: Anton Würfel <anton.wuerfel@xxxxxx>
Signed-off-by: Phillip Raffeck <phillip.raffeck@xxxxxx>
CC: linux-kernel@xxxxxxxxxxxx
---
v2: Split patch
---
drivers/tty/serial/8250/8250_pci.c | 12 ++++++------
drivers/tty/serial/8250/8250_pnp.c | 4 ++--
drivers/tty/serial/8250/8250_port.c | 12 ++++++------
3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 09157fa..b0b47f9 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -841,12 +841,12 @@ static int pci_netmos_init(struct pci_dev *dev)
return 0;
switch (dev->device) { /* FALLTHROUGH on all */
- case PCI_DEVICE_ID_NETMOS_9904:
- case PCI_DEVICE_ID_NETMOS_9912:
- case PCI_DEVICE_ID_NETMOS_9922:
- case PCI_DEVICE_ID_NETMOS_9900:
- num_serial = pci_netmos_9900_numports(dev);
- break;
+ case PCI_DEVICE_ID_NETMOS_9904:
+ case PCI_DEVICE_ID_NETMOS_9912:
+ case PCI_DEVICE_ID_NETMOS_9922:
+ case PCI_DEVICE_ID_NETMOS_9900:
+ num_serial = pci_netmos_9900_numports(dev);
+ break;
default:
if (num_serial == 0) {
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 1ed67e0..3811c67 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -427,8 +427,8 @@ static int check_resources(struct pnp_dev *dev)
static int serial_pnp_guess_board(struct pnp_dev *dev)
{
if (!(check_name(pnp_dev_name(dev)) ||
- (dev->card && check_name(dev->card->name))))
- return -ENODEV;
+ (dev->card && check_name(dev->card->name))))
+ return -ENODEV;
if (check_resources(dev))
return 0;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 343d050..5566c8e 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2235,9 +2235,9 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
serial_port_out(port, 0x2, quot_frac);
}
-static unsigned int
-serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+static unsigned int serial8250_get_baud_rate(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int tolerance = port->uartclk / 100;
@@ -2252,9 +2252,9 @@ serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
(port->uartclk + tolerance) / 16);
}
-void
-serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+void serial8250_do_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_8250_port *up = up_to_u8250p(port);
unsigned char cval;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
