[PATCH 02/11] tty: serial: 8250: Fix indentation warnings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Checkpatch complains about incorrect indentation of switch/case statements.
This patch fixes the corresponding warnings. Additionally some indentation
is changed to match the correct format specified in the Linux Kernel
Coding Style.

Signed-off-by: Anton Würfel <anton.wuerfel@xxxxxx>
Signed-off-by: Phillip Raffeck <phillip.raffeck@xxxxxx>
CC: linux-kernel@xxxxxxxxxxxx
---
 drivers/tty/serial/8250/8250_pci.c  | 31 +++++++++++++++----------------
 drivers/tty/serial/8250/8250_pnp.c  |  4 ++--
 drivers/tty/serial/8250/8250_port.c | 14 +++++++-------
 3 files changed, 24 insertions(+), 25 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index ed99fdf..41508a5 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -722,7 +722,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
 	 */
 	pcibios_resource_to_bus(dev->bus, &region, &dev->resource[bar]);
 	device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
-	                | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
+			| MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
 	writel(device_window, p + MITE_IOWBSR1);
 
 	/* Set window access to go to RAMSEL IO address space */
@@ -843,17 +843,16 @@ static int pci_netmos_init(struct pci_dev *dev)
 		return 0;
 
 	switch (dev->device) { /* FALLTHROUGH on all */
-		case PCI_DEVICE_ID_NETMOS_9904:
-		case PCI_DEVICE_ID_NETMOS_9912:
-		case PCI_DEVICE_ID_NETMOS_9922:
-		case PCI_DEVICE_ID_NETMOS_9900:
-			num_serial = pci_netmos_9900_numports(dev);
-			break;
+	case PCI_DEVICE_ID_NETMOS_9904:
+	case PCI_DEVICE_ID_NETMOS_9912:
+	case PCI_DEVICE_ID_NETMOS_9922:
+	case PCI_DEVICE_ID_NETMOS_9900:
+		num_serial = pci_netmos_9900_numports(dev);
+		break;
 
-		default:
-			if (num_serial == 0 ) {
-				moan_device("unknown NetMos/Mostech device", dev);
-			}
+	default:
+		if (num_serial == 0)
+			moan_device("unknown NetMos/Mostech device", dev);
 	}
 
 	if (num_serial == 0)
@@ -1766,7 +1765,7 @@ xr17v35x_has_slave(struct serial_private *priv)
 	const int dev_id = priv->dev->device;
 
 	return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
-	        (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
+		(dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
 }
 
 static int
@@ -1866,8 +1865,8 @@ pci_fastcom335_setup(struct serial_private *priv,
 
 static int
 pci_wch_ch353_setup(struct serial_private *priv,
-                    const struct pciserial_board *board,
-                    struct uart_8250_port *port, int idx)
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
 {
 	port->port.flags |= UPF_FIXED_TYPE;
 	port->port.type = PORT_16550A;
@@ -1876,8 +1875,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
 
 static int
 pci_wch_ch38x_setup(struct serial_private *priv,
-                    const struct pciserial_board *board,
-                    struct uart_8250_port *port, int idx)
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
 {
 	port->port.flags |= UPF_FIXED_TYPE;
 	port->port.type = PORT_16850;
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 658b392..1f18065 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -425,8 +425,8 @@ static int check_resources(struct pnp_dev *dev)
 static int serial_pnp_guess_board(struct pnp_dev *dev)
 {
 	if (!(check_name(pnp_dev_name(dev)) ||
-		(dev->card && check_name(dev->card->name))))
-			return -ENODEV;
+	    (dev->card && check_name(dev->card->name))))
+		return -ENODEV;
 
 	if (check_resources(dev))
 		return 0;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index ae8f993..57ad0f2 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -52,7 +52,7 @@
 #define DEBUG_AUTOCONF(fmt...)	do { } while (0)
 #endif
 
-#define BOTH_EMPTY 	(UART_LSR_TEMT | UART_LSR_THRE)
+#define BOTH_EMPTY	(UART_LSR_TEMT | UART_LSR_THRE)
 
 /*
  * Here we define the default xmit fifo size used for each type of UART.
@@ -2236,9 +2236,9 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
 		serial_port_out(port, 0x2, quot_frac);
 }
 
-static unsigned int
-serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
-			 struct ktermios *old)
+static unsigned int serial8250_get_baud_rate(struct uart_port *port,
+					     struct ktermios *termios,
+					     struct ktermios *old)
 {
 	unsigned int tolerance = port->uartclk / 100;
 
@@ -2253,9 +2253,9 @@ serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 				  (port->uartclk + tolerance) / 16);
 }
 
-void
-serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
-		          struct ktermios *old)
+void serial8250_do_set_termios(struct uart_port *port,
+			       struct ktermios *termios,
+			       struct ktermios *old)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned char cval;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux