On Fri, 2013-09-13 at 18:27 +0200, Jeroen Roovers wrote: > Resending since it apparently never got through (binary attachment?)... > > While running tcpdump or wireshark (dumpcap) and setting promiscuous > mode on eth0, I get an HPMC in cpu_startup_entry. > > Attached are the: > > 1) PDC output for PIM(1) and assorted information > gathered from the PDC SER menu and the serial console > 2) gzipped System.map of the kernel > 3) .config of the kernel > > 40:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 > PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) > 40:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 > PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) > 60:01.0 USB controller: NEC Corporation OHCI USB Controller (rev 41) > 60:01.1 USB controller: NEC Corporation OHCI USB Controller (rev 41) > 60:01.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller > (rev 02) > 60:02.0 IDE interface: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host > Controller (rev 02) > 60:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet > Controller (rev 02) > 80:00.0 VGA compatible controller: Advanced Micro Devices, Inc. > [AMD/ATI] RV350 GL [FireGL T2] (rev 80) > > What else to say? Translation of the kernel addresses from %rp (0x4018eb0c), and the two IAOQ entries (0x0, 0x4018eb24). Since the first IAOQ entry is zero, whatever is at the second seemed to trigger a jump to a NULL pointer. James -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
