Ok, I have it in my tree. Rolf mentioned a few cleanup things, but this
is consistent with what is already there. I should clean up all the
things Rolf talked about in all the cases.
Thanks,
-corey
On 07/30/2013 04:13 PM, Thomas Bogendoerfer wrote:
The last line of PARISC machines (C8000, RP34x0, etc.) have a BMC for
controlling temperature, fan speed and other stuff. The BMC is connected
via a special bus and listed in the firmware device tree. This change
adds support for these BMCs to the IPMI driver.
Signed-off-by: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
---
v2: Fixed SMP problem by using smi_alloc_info() to get spinlock initialized
correctly
This is the second try to get this change integrated. If you see
any problems with this patch, please give me hints how to improve
this patch.
drivers/char/ipmi/ipmi_si_intf.c | 75 ++++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index af4b23f..1ea4201 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -71,6 +71,11 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#ifdef CONFIG_PARISC
+#include <asm/hardware.h> /* for register_parisc_driver() stuff */
+#include <asm/parisc-device.h>
+#endif
+
#define PFX "ipmi_si: "
/* Measure times between events in the driver. */
@@ -298,6 +303,9 @@ static int pci_registered;
#ifdef CONFIG_ACPI
static int pnp_registered;
#endif
+#ifdef CONFIG_PARISC
+static int parisc_registered;
+#endif
static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
static int num_max_busy_us;
@@ -2697,6 +2705,62 @@ static struct platform_driver ipmi_driver = {
.remove = ipmi_remove,
};
+#ifdef CONFIG_PARISC
+static int ipmi_parisc_probe(struct parisc_device *dev)
+{
+ struct smi_info *info;
+
+ info = smi_info_alloc();
+
+ if (!info) {
+ dev_err(&dev->dev,
+ "could not allocate memory for PARISC probe\n");
+ return -ENOMEM;
+ }
+
+ info->si_type = SI_KCS;
+ info->addr_source = SI_DEVICETREE;
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ info->io.addr_data = dev->hpa.start;
+ info->io.regsize = 1;
+ info->io.regspacing = 1;
+ info->io.regshift = 0;
+ info->irq = 0; /* no interrupt */
+ info->irq_setup = NULL;
+ info->dev = &dev->dev;
+
+ dev_dbg(&dev->dev, "addr 0x%lx\n", info->io.addr_data);
+
+ dev_set_drvdata(&dev->dev, info);
+
+ if (add_smi(info)) {
+ kfree(info);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int ipmi_parisc_remove(struct parisc_device *dev)
+{
+ cleanup_one_si(dev_get_drvdata(&dev->dev));
+ return 0;
+}
+
+static struct parisc_device_id ipmi_parisc_tbl[] = {
+ { HPHW_MC, HVERSION_REV_ANY_ID, 0x004, 0xC0 },
+ { 0, }
+};
+
+static struct parisc_driver ipmi_parisc_driver = {
+ .name = "ipmi",
+ .id_table = ipmi_parisc_tbl,
+ .probe = ipmi_parisc_probe,
+ .remove = ipmi_parisc_remove,
+};
+#endif /* CONFIG_PARISC */
+
static int wait_for_msg_done(struct smi_info *smi_info)
{
enum si_sm_result smi_result;
@@ -3462,6 +3526,13 @@ static int init_ipmi_si(void)
spmi_find_bmc();
#endif
+#ifdef CONFIG_PARISC
+ register_parisc_driver(&ipmi_parisc_driver);
+ parisc_registered = 1;
+ /* poking PC IO addresses will crash machine, don't do it */
+ si_trydefaults = 0;
+#endif
+
/* We prefer devices with interrupts, but in the case of a machine
with multiple BMCs we assume that there will be several instances
of a given type so if we succeed in registering a type then also
@@ -3608,6 +3679,10 @@ static void cleanup_ipmi_si(void)
if (pnp_registered)
pnp_unregister_driver(&ipmi_pnp_driver);
#endif
+#ifdef CONFIG_PARISC
+ if (parisc_registered)
+ unregister_parisc_driver(&ipmi_parisc_driver);
+#endif
platform_driver_unregister(&ipmi_driver);
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
