On Thu, 2013-04-25 at 21:06 +0200, Ulrich Teichert wrote:
> Hi,
>
> >> And that's it. Well, the ISO *is* an experimental one ;-) Any idea what
> >> to try?
> >
> >video=radeonfb:off
>
> Right, that got it to boot ;-) But it failed to recognize my hard disk:
>
> [ 15.020000] Fusion MPT base driver 3.04.20
> [ 15.072000] Copyright (c) 1999-2008 LSI Corporation
> [ 15.136000] Fusion MPT SPI Host driver 3.04.20
> [ 15.220000] mptbase: ioc0: Initiating bringup
> [ 15.760000] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
> [ 16.328000] scsi0 : ioc0: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=66
> [ 43.872000] mptscsih: ioc0: attempting task abort! (sc=000000007f29e300)
> [ 43.960000] scsi 0:0:6:0: CDB:
> [ 44.000000] cdb[0]=0x12: 12 00 00 00 24 00
> [ 54.176000] mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x24000000
> [ 55.584000] mptscsih: ioc0: task abort: SUCCESS (rv=2002) (sc=000000007f29e300)
> [ 55.680000] scsi target0:0:6: asynchronous
> [ 55.928000] mptscsih: ioc0: attempting target reset! (sc=000000007f29e300)
> [ 56.020000] scsi 0:0:6:0: CDB:
> [ 56.060000] cdb[0]=0x12: 12 00 00 00 24 00
> [ 56.476000] mptscsih: ioc0: target reset: SUCCESS (sc=000000007f29e300)
> [ 56.812000] mptscsih: ioc0: attempting bus reset! (sc=000000007f29e300)
> [ 56.900000] scsi 0:0:6:0: CDB:
> [ 56.944000] cdb[0]=0x12: 12 00 00 00 24 00
> [ 57.632000] mptscsih: ioc0: bus reset: SUCCESS (sc=000000007f29e300)
> [ 67.968000] mptscsih: ioc0: attempting host reset! (sc=000000007f29e300)
> [ 68.816000] mptscsih: ioc0: host reset: SUCCESS (sc=000000007f29e300)
> [ 68.900000] scsi target0:0:6: asynchronous
> [ 79.152000] scsi 0:0:6:0: Device offlined - not ready after error recovery
> [ 81.268000] mptbase: ioc1: Initiating bringup
> [ 81.808000] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target}
> [ 82.376000] scsi1 : ioc1: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=67
>
> Which is a bit strange as I can boot HPUX from it just fine. Is that a
> common problem? Or should I just try another disk? E1000 ethernet support
> is OK and running, though,
That one looks very much like an interrupt routing problem ... the full
log might give more diagnostic information.
James
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
