Hi, [del] >have been kept up to date quite well. That said, we recently released a >new set of boot images (CD[2] and netboot[3]) with support for >recent hardware, filesystems and (yes!) SMP. > > > jer > > >[1] http://distfiles.gentoo.org/releases/hppa/autobuilds/current-stage3/ >[2] http://distfiles.gentoo.org/experimental/hppa/livecd/ >[3] http://distfiles.gentoo.org/experimental/hppa/netboot/ Tried [2] on my C8000 dual CPU, on a serial line just now: ... HARD Booted. <Cpu0> 0000109800e00000 0000000000000000 CC_BOOT_LAUNCH_IPL_OTHR <Cpu0> 0100142900e00000 fffffff0f0e0ac00 CC_CPU_INTRIGUE_LDB <Cpu0> 3400082100e00000 0000000000000001 CC_BOOT_BOOT_COMPLETE palo ipl 1.5 root@hope Sat Apr 23 18:06:47 CEST 2005 ... [ 0.000000] Linux version 3.6.11-livecd64 (root@terminator) (gcc version 4.6.3 (Gentoo 4.6.3 p1.9) ) #1 SMP Thu Jan 24 16:09:18 UTC 2013 [ 0.000000] unwind_init: start = 0x406ad000, end = 0x406e85e0, entries = 15198 [ 0.000000] FP[0] enabled: Rev 1 Model 20 [ 0.000000] The 64-bit Kernel has started... [ 0.000000] bootconsole [ttyB0] enabled [ 0.000000] Initialized PDC Console for debugging. [ 0.000000] Determining PDC firmware type: 64 bit PAT. [ 0.000000] model 000089b0 00000491 00000000 00000002 56fa29f07c511780 100000f0 00000008 000000b2 000000b2 [ 0.000000] vers 00000401 [ 0.000000] CPUID vers 20 rev 10 (0x0000028a) [ 0.000000] capabilities 0x35 [ 0.000000] model 9000/785/C8000 [ 0.000000] parisc_cache_init: Only equivalent aliasing supported! [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB [ 0.000000] 1) Start 0x0000000100000000 End 0x00000001ffdfffff Size 4094 MB [ 0.000000] 2) Start 0x0000004040000000 End 0x00000040ffffffff Size 3072 MB [ 0.000000] Total Memory: 8190 MB [ 0.000000] initrd: 7fda6000-7ffee9d0 [ 0.000000] initrd: reserving 3fda6000-3ffee9d0 (mem_max 1ffe00000) [ 0.000000] PERCPU: Embedded 10 pages/cpu @000000004266e000 s9728 r8192 d23040 u40960 [ 0.000000] SMP: bootstrap CPU ID is 0 [ 0.000000] Built 3 zonelists in Zone order, mobility grouping on. Total pages: 2067975 [ 0.000000] Kernel command line: root=/dev/ram0 init=/linuxrc cdroot dokeymap looptype=squashfs loop=/image.squashfs console=ttyB0 palo_kernel=0/livecd [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8230968k/8386560k available (4846k kernel code, 155592k reserved, 1929k data, 376k init) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=8 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:128 [ 0.000000] Console: colour dummy device 160x64 [ 0.056000] Calibrating delay loop... 1988.60 BogoMIPS (lpj=3977216) [ 0.156000] pid_max: default: 32768 minimum: 301 [ 0.216000] Mount-cache hash table entries: 256 [ 0.276000] Brought up 1 CPUs [ 0.316000] xor: measuring software checksum speed [ 0.420000] 8regs : 4697.000 MB/sec [ 0.512000] 8regs_prefetch: 3504.000 MB/sec [ 0.608000] 32regs : 3852.000 MB/sec [ 0.700000] 32regs_prefetch: 3552.000 MB/sec [ 0.760000] xor: using function: 8regs (4697.000 MB/sec) [ 0.828000] NET: Registered protocol family 16 [ 0.888000] EISA bus registered [ 0.928000] Searching for devices... [ 1.080000] Found devices: [ 1.116000] 1. Crestone Peak Mako+ Slow at 0xfffffffffe780000 [128] { 0, 0x0, 0x89b, 0x00004 } [ 1.232000] 2. Crestone Peak Mako+ Slow at 0xfffffffffe781000 [129] { 0, 0x0, 0x89b, 0x00004 } [ 1.344000] 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x0b6, 0x00009 } [ 1.436000] 4. Pluto BC McKinley Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x880, 0x0000c } [ 1.544000] 5. Mercury PCI Bridge at 0xfffffffffed20000 [0/0] { 13, 0x0, 0x783, 0x0000a } [ 1.652000] 6. Mercury PCI Bridge at 0xfffffffffed24000 [0/2] { 13, 0x0, 0x783, 0x0000a } [ 1.760000] 7. Mercury PCI Bridge at 0xfffffffffed26000 [0/3] { 13, 0x0, 0x783, 0x0000a } [ 1.868000] 8. Quicksilver AGP Bridge at 0xfffffffffed28000 [0/4] { 13, 0x0, 0x784, 0x0000a } [ 1.980000] 9. BMC IPMI Mgmt Ctlr at 0xfffffff0f05b0000 [16] { 15, 0x0, 0x004, 0x000c0 } [ 2.088000] 10. unknown device at 0xfffffff0f05e0000 [17] { 10, 0x0, 0x076, 0x000ad } [ 2.192000] 11. unknown device at 0xfffffff0f05e2000 [18] { 10, 0x0, 0x076, 0x000ad } [ 2.296000] Enabling PDC_PAT chassis codes support v0.05 <Cpu0> 38000c6400e00000 a0e008101100c000 CC_PAT_ENCODED_FIELD_MAJOR_FWD_PROG <Cpu0> 36000c6a00e00000 0000000000000420 CC_PAT_DATA_FIELD_MAJOR_FWD_PROG [ 3.228000] Releasing cpu 1 now, hpa=fffffffffe781000 <Cpu1> 0000099101e00000 0000000000000000 CC_BOOT_OS_RENDEZVOUS <Cpu1> 0100142901e00000 fffffff0f0e0ac00 CC_CPU_INTRIGUE_LDB [ 3.664000] FP[1] enabled: Rev 1 Model 20 [ 3.668000] genirq: Flags mismatch irq 64. 00015620 (timer) vs. 00015620 (timer) [ 3.816000] genirq: Flags mismatch irq 65. 00000420 (IPI) vs. 00000420 (IPI) [ 3.924000] CPU(s): 2 x PA8900 (Shortfin) at 1000.000000 MHz [ 4.008000] Setting cache flush threshold to 4000000 (2 CPUs online) [ 4.256000] SBA found Pluto 2.3 at 0xfffffffffed00000 [ 4.472000] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000 [ 4.616000] LBA 0:0: PCI host bridge to bus 0000:00 [ 4.680000] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.760000] pci_bus 0000:00: root bus resource [mem 0xffffffff80000000-0 fffff8fffffff] (bus address [0x80000000-0x8fffffff]) [ 4.912000] pci_bus 0000:00: root bus resource [mem 0xffffff0000000000-0xffffff0fffffffff] [ 5.024000] pci_bus 0000:00: root bus resource [bus 00-07] [ 5.120000] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000 [ 5.264000] LBA 0:2: PCI host bridge to bus 0000:40 [ 5.328000] pci_bus 0000:40: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 5.448000] pci_bus 0000:40: root bus resource [mem 0xffffffffa0000000-0xffffffffafffffff] (bus address [0xa0000000-0xafffffff]) [ 5.600000] pci_bus 0000:40: root bus resource [mem 0xffffff2000000000-0xffffff2fffffffff] [ 5.708000] pci_bus 0000:40: root bus resource [bus 40-47] [ 5.804000] Mercury version TR3.2 (0x32) found at 0xfffffffffed26000 [ 5.948000] LBA 0:3: PCI host bridge to bus 0000:60 [ 6.016000] pci_bus 0000:60: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff]) [ 6.132000] pci_bus 0000:60: root bus resource [mem 0xffffffffb0000000-0xffffffffbfffffff] (bus address [0xb0000000-0xbfffffff]) [ 6.284000] pci_bus 0000:60: root bus resource [mem 0xffffff3000000000-0xffffff3fffffffff] [ 6.396000] pci_bus 0000:60: root bus resource [bus 60-67] [ 6.492000] Quicksilver version TR1.0 (0x10) found at 0xfffffffffed28000 [ 6.640000] LBA 0:4: PCI host bridge to bus 0000:80 [ 6.708000] pci_bus 0000:80: root bus resource [io 0x30000-0x3ffff] (bus address [0x0000-0xffff]) [ 6.824000] pci_bus 0000:80: root bus resource [mem 0xffffffffc0000000-0xffffffffcfffffff] (bus address [0xc0000000-0xcfffffff]) [ 6.976000] pci_bus 0000:80: root bus resource [mem 0xffffff4000000000-0xffffff4fffffffff] [ 7.084000] pci_bus 0000:80: root bus resource [bus 80-87] [ 7.160000] pci 0000:80:00.0: no compatible bridge window for [mem 0xd0030000-0xd003ffff] [ 7.268000] pci 0000:80:00.0: no compatible bridge window for [mem 0xd0000000-0xd001ffff pref] [ 7.380000] pci 0000:80:00.1: no compatible bridge window for [mem 0xd0020000-0xd002ffff] [ 7.488000] iosapic: no IRTE for 0000:80:00.1 (IRQ not connected?) [ 7.568000] pci 0000:80:00.0: BAR 6: assigned [mem 0xffffff4000000000-0xffffff400001ffff pref] [ 7.684000] pci 0000:80:00.0: BAR 2: assigned [mem 0xffffff4000020000-0xffffff400002ffff] [ 7.792000] pci 0000:80:00.1: BAR 1: assigned [mem 0xffffff4000030000-0xffffff400003ffff] <Cpu0> 0300108200e00000 0000000000000000 CC_PROCS_ENTRY_IN <Cpu0> 0300030700e00000 0000000000000000 CC_SYSTEM_STATE_RUNNING_OK [ 8.304000] powersw: Soft power switch at 0xfffffff0f042e278 enabled. [ 8.400000] bio: create slab <bio-0> at 0 [ 8.520000] raid6: int64x1 988 MB/s [ 8.636000] raid6: int64x2 1207 MB/s [ 8.752000] raid6: int64x4 1342 MB/s [ 8.868000] raid6: int64x8 1270 MB/s [ 8.916000] raid6: using algorithm int64x4 (1342 MB/s) [ 8.984000] raid6: using intx1 recovery algorithm [ 9.044000] vgaarb: device added: PCI:0000:80:00.0,decodes=io+mem,owns=io+mem,locks=none [ 9.152000] vgaarb: loaded [ 9.188000] vgaarb: bridge control possible 0000:80:00.0 [ 9.260000] SCSI subsystem initialized [ 9.308000] usbcore: registered new interface driver usbfs [ 9.380000] usbcore: registered new interface driver hub [ 9.452000] usbcore: registered new device driver usb [ 9.524000] NET: Registered protocol family 2 [ 9.584000] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 9.684000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 9.776000] TCP: Hash tables configured (established 262144 bind 65536) [ 9.860000] TCP: reno registered [ 9.684000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 9.776000] TCP: Hash tables configured (established 262144 bind 65536) [ 9.860000] TCP: reno registered [ 9.904000] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 9.984000] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 10.072000] NET: Registered protocol family 1 [ 10.204000] Unpacking initramfs... [ 11.540000] Freeing initrd memory: 2338k freed [ 11.600000] The PDC console driver is still registered, removing CON_BOOT flag [ 11.696000] Chassis warnings not supported. [ 11.752000] Performance monitoring counters enabled for Crestone Peak Mako+ Slow [ 11.860000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 11.960000] msgmni has been set to 16080 [ 12.012000] io scheduler noop registered [ 12.064000] io scheduler deadline registered [ 12.120000] io scheduler cfq registered (default) [ 12.184000] STI GSC/PCI core graphics driver Version 0.9a [ 12.256000] radeonfb 0000:80:00.0: enabling SERR and PARITY (0107 -> 0147) <Cpu1> e800009801e00000 00000000401173e8 CC_ERR_CHECK_HPMC <Cpu1> 37000f7301e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu1> f600105e01e00000 fffffff0f0c00000 CC_MC_HPMC_MONARCH_SELECTED <Cpu1> 140003b201e00000 000000000000000b CC_ERR_HPMC_STATE_ENTRY <Cpu1> 5600100b01e00000 0000000000000194 CC_MC_OS_HPMC_LEN_ERR <Cpu1> 5600106401e00000 fffffff0f0436fc0 CC_MC_BR_TO_OS_HPMC_FAILED <Cpu1> e800009801e00000 00000000401173e8 CC_ERR_CHECK_HPMC <Cpu0> ec000c9600e00000 0000000000000000 CC_ERR_CHECK_FALL_THROUGH <Cpu1> 37000f7301e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu1> 4000109f01e00000 0000000000000000 CC_MC_HPMC_INITIATED <Cpu1> 4000101901e00000 0000000000000000 CC_MC_MULTIPLE_HPMCS <Cpu1> 030010d501e00000 0000000000000000 CC_CPU_STOP [ 72.356000] INFO: rcu_sched detected stalls on CPUs/tasks: { 1} (detected by 0, t=15002 jiffies) [ 72.356000] Backtrace: [ 72.356000] [<0000000040136238>] dump_stack+0x18/0x28 [ 72.356000] [<00000000401badec>] rcu_check_callbacks+0x824/0x840 [ 72.356000] [<000000004016c6fc>] update_process_times+0x64/0xb0 [ 72.356000] [<00000000401378c8>] timer_interrupt+0x198/0x1f8 [ 72.356000] [<00000000401b1c4c>] handle_irq_event_percpu+0xbc/0x2f8 [ 72.356000] [<00000000401b62ec>] handle_percpu_irq+0x9c/0xd0 [ 72.356000] [<00000000401b10b4>] generic_handle_irq+0x44/0x58 [ 72.356000] [<000000004013839c>] do_cpu_irq_mask+0x1ac/0x290 [ 72.356000] [<0000000040105074>] intr_return+0x0/0x4 [ 72.356000] [<000000004013f428>] cpu_idle+0x80/0xb0 And that's it. Well, the ISO *is* an experimental one ;-) Any idea what to try? CU, Uli -- Dipl. Inf. Ulrich Teichert|e-mail: Ulrich.Teichert@xxxxxx | Listening to: Stormweg 24 |Pale Bride (The Von Bondies), Slip Away (Sedatives) 24539 Neumuenster, Germany|Sacred Decay (The Estranged), She's Lost Control -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
