On 05/10/2012 04:03 AM, John David Anglin wrote:
On 9-May-12, at 5:14 PM, Vincent wrote:
On 05/09/2012 05:55 PM, John David Anglin wrote:
Attached is an updated version. It applies against 3.3.4.
Thanks. It applies on v3.4-rc6 with no issue. However, it crashes at
boot in flush_dcache_page_asm.
I want to make a general comment.
The hp712/100 is an old machine. There is no longer ANY support for
parisc open source by HP. If the parisc user community wants to continue
to run current open source software, then it will have to work
together to
achieve this goal.
In this case, we need to figure out what is wrong with the tmpalias code
on the hp712/100.
Debian dropping hppa after the lenny release was a wake up call. There
is pressure on other fronts. See for example the following thread,
http://gcc.gnu.org/ml/gcc/2012-05/msg00093.html
If accepted, it would mean the end of 32-bit GCC development for parisc,
and therefore the end of parisc linux and netbsd systems. More
specifically,
it may be reasonable to drop support for PA 1.1 systems. So, we need
to hear why it is important to continue to try to maintain PA 1.1
systems.
In general, I have found Debian package maintainers to be supportive
of bug fixes for parisc. Most packages still support parisc and build
without
problems but there is some porting work that needs doing. For example,
mono has seriously rotted. Without a viable userspace, there's not much
point to maintaining the kernel.
I applaud Mikulas for reviewing Rolf Eike's fixes for 3.4 and posting
them to the
linux-kernel list. Maintainers have personal time issues and can't
always be
available.
I have spent hundreds of hours building packages, working on GCC,
binutils, glibc and kernel bugs over the past year. I have pushed fixes
upstream and back ported them as quickly as possible because it takes
considerable time before the fixes start to percolate downstream.
I have a project to restart a Debian buildd for parisc and help would be
appreciated. The key issue is help in reporting and analyzing package
bugs. and informing the appropriate maintainers when there are problems.
I posted a number of kernel work in progress patches to the linux-parisc
list but nobody bothered to test them except for Vincent today. All I
know
at this point is my rp3440 is much more stable and runs twice as fast as
it used to with my cache patch. As such, it can keep up with unstable.
This took hundreds of kernel builds and considerable long term testing.
The problem with cache bugs is they are difficult. The parisc
architecture
and the linux requirements for cache routines are inadequately
documented.
So, it has become a trial and error exercise. This has always been the
critical problem for parisc-linux and the code in cache.c reflects this.
It is impossible for volunteers to run and maintain a broad range of
hardware. So, we need to focus on the hardware that is used and will
continue to used over the next few years. If users want support, then
they need to be willing to help as well.
Hi Dave,
I have my machines now up and running again.
I tested upstream version (bcc62fb) and got on all my machines the same
bug (same Kernel binary started on all):
Backtrace:
[<1021dc3c>] mpage_readpages+0xf0/0x16c
[<10257e88>] ext3_readpages+0x28/0x38
[<101acb90>] __do_page_cache_readahead+0x1e0/0x27c
[<101acc5c>] ra_submit+0x30/0x40
[<101acee0>] ondemand_readahead+0xd0/0x26c
or
Backtrace:
[<1021dc3c>] mpage_readpages+0xf0/0x16c
[<10257e88>] ext3_readpages+0x28/0x38
[<101acb90>] __do_page_cache_readahead+0x1e0/0x27c
[<101acc5c>] ra_submit+0x30/0x40
[<101acee0>] ondemand_readahead+0xd0/0x26c
[<101ad1a8>] page_cache_sync_readahead+0x44/0x74
[<101a38e4>] generic_file_aio_read+0x400/0x764
[<101e243c>] do_sync_read+0xd4/0x130
[<101e32f4>] vfs_read+0xac/0x158
[<101ea47c>] kernel_read+0x40/0x5c
[<101ea58c>] prepare_binprm+0xf4/0x130
[<101eae3c>] do_execve+0x2b8/0x3a4
[<1012199c>] sys_execve+0x64/0x94
[<10104084>] __execve+0x20/0x34
[<10136374>] vprintk+0x1e8/0x488
[<101a83e8>] __free_pages+0x54/0x64
all logs attached for the 715/64, B160L and C3000 machines.
I'll test tomorrow your patch (but will try to update my binutils/gcc
prior to that).
Helge
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: 'HOME=/ root=/dev/sda3 pa64root=sda5 ip=bootp panic_timeout=60 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux'
Selected kernel: /vmlinux from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 32-bit kernelELF32 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 6647808 mediaptr 0x1000
Segment 1 load 007a0000 size 185472 mediaptr 0x658000
Segment 2 load 007ce000 size 145080 mediaptr 0x686000
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.0-rc6-32bit+ (deller@p100) (gcc version 4.3.3 (GCC) ) #7 Sat May 12 22:55:41 CEST 2012
unwind_init: start = 0x106a8000, end = 0x106ebdc0, entries = 17372
WARNING: Out of order unwind entry! 106a95c0 and 106a95d0
WARNING: Out of order unwind entry! 106a95d0 and 106a95e0
WARNING: Out of order unwind entry! 106aa090 and 106aa0a0
WARNING: Out of order unwind entry! 106aa0a0 and 106aa0b0
WARNING: Out of order unwind entry! 106aa110 and 106aa120
WARNING: Out of order unwind entry! 106aa120 and 106aa130
WARNING: Out of order unwind entry! 106aa140 and 106aa150
WARNING: Out of order unwind entry! 106aa150 and 106aa160
WARNING: Out of order unwind entry! 106aa160 and 106aa170
WARNING: Out of order unwind entry! 106aa170 and 106aa180
WARNING: Out of order unwind entry! 106aa180 and 106aa190
WARNING: Out of order unwind entry! 106aa190 and 106aa1a0
WARNING: Out of order unwind entry! 106aa1a0 and 106aa1b0
WARNING: Out of order unwind entry! 106aa1b0 and 106aa1c0
WARNING: Out of order unwind entry! 106aa1c0 and 106aa1d0
WARNING: Out of order unwind entry! 106aa1d0 and 106aa1e0
WARNING: Out of order unwind entry! 106aa1e0 and 106aa1f0
WARNING: Out of order unwind entry! 106aa1f0 and 106aa200
WARNING: Out of order unwind entry! 106aa210 and 106aa220
WARNING: Out of order unwind entry! 106aa220 and 106aa230
FP[0] enabled: Rev 1 Model 15
The 32-bit Kernel has started...
bootconsole [ttyB0] enabled
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 00005020 00000481 00000000 02020202 7794d7fe 100000f0 00000004 000000ba 000000ba
vers 00000008
CPUID vers 15 rev 8 (0x000001e8)
capabilities 0x2
model 9000/778/B160L
Total Memory: 128 MB
LED display at f0190001 registered
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: HOME=/ root=/dev/sda3 pa64root=sda5 ip=bootp panic_timeout=60 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
allocated 262144 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 122356k/131072k available (4505k kernel code, 8716k reserved, 1964k data, 328k init)
virtual kernel memory layout:
vmalloc : 0x00810000 - 0x0f000000 ( 231 MB)
memory : 0x10000000 - 0x18000000 ( 128 MB)
.init : 0x107a0000 - 0x107f2000 ( 328 kB)
.data : 0x10566690 - 0x107517b0 (1964 kB)
.text : 0x10100000 - 0x10566690 (4505 kB)
NR_IRQS:96
Console: colour dummy device 128x48
Calibrating delay loop... 106.39 BogoMIPS (lpj=531968)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
xor: measuring software checksum speed
8regs : 131.200 MB/sec
8regs_prefetch: 130.800 MB/sec
32regs : 206.400 MB/sec
32regs_prefetch: 206.000 MB/sec
xor: using function: 32regs (206.400 MB/sec)
atomic64 test passed
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. Phantom PseudoBC GSC+ Port at 0xffc00000 [8] { 7, 0x0, 0x504, 0x00000 }
2. Dino PCI Bridge at 0xfff80000 [8/0] { 13, 0x3, 0x680, 0x0000a }
3. Merlin+ 132 Dino RS-232 at 0xfff83000 [8/0/63] { 10, 0x0, 0x022, 0x0008c }
4. Merlin 160 Core FW-SCSI at 0xfff8c000 [8/12] { 4, 0x0, 0x03d, 0x00089 }
5. Merlin 160 Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x03d, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000
6. Merlin 160 Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x03d, 0x0008c }
7. Merlin 160 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x03d, 0x00082 }
8. Merlin 160 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x03d, 0x0008a }
9. Merlin 160 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x03d, 0x00074 }, additional addresses: 0xffd01000 0xffd03000
10. Merlin 160 Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x03d, 0x0007b }
11. Merlin 160 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x03d, 0x00084 }
12. Merlin 160 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x03d, 0x00084 }
13. Coral SGC Graphics at 0xfa000000 [8/4] { 10, 0x0, 0x004, 0x00077 }
14. Coral SGC Graphics at 0xf4000000 [8/8] { 10, 0x0, 0x004, 0x00077 }
15. Gecko GSC Core Graphics at 0xf8000000 [8/24] { 10, 0x0, 0x016, 0x00085 }, additional addresses: 0xf0011000
16. Merlin L2 160 (9000/778/B160L) at 0xfffbe000 [62] { 0, 0x0, 0x502, 0x00004 }
17. Memory at 0xfffbf000 [63] { 1, 0x0, 0x067, 0x00009 }
18. Merlin+ 132 Dino PS/2 Port at 0xfff81000 [1] { 10, 0x0, 0x022, 0x00096 }
CPU(s): 1 x PA7300LC (PCX-L2) at 160.000000 MHz
Setting cache flush threshold to 920 (1 CPUs online)
Lasi version 0 at 0xffd00000 found.
Dino version 3.1 found at 0xfff80000
Dino: No PCI devices enabled.
dino 8:0: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
powersw: Soft power switch at 0xf0140000 enabled.
bio: create slab <bio-0> at 0
raid6: int32x1 59 MB/s
raid6: int32x2 72 MB/s
raid6: int32x4 89 MB/s
raid6: int32x8 49 MB/s
raid6: using algorithm int32x4 (89 MB/s)
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource cr16
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 128 (order: 0, 6144 bytes)
UDP-Lite hash table entries: 128 (order: 0, 6144 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Enabling PDC chassis warnings support v0.05
Initializing RT-Tester: OK
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
Backtrace:
[<1011b070>] show_stack+0x18/0x28
[<101148f8>] dump_stack+0x1c/0x2c
[<10181098>] backtrace_regression_test+0x50/0x130
[<10118eac>] do_one_initcall+0x54/0x284
[<107a1abc>] kernel_init+0x1a8/0x270
[<1010405c>] ret_from_kernel_thread+0x1c/0x24
Testing a backtrace from irq context.
The following trace is a kernel self test and not a bug!
Backtrace:
[<1011b070>] show_stack+0x18/0x28
[<101148f8>] dump_stack+0x1c/0x2c
[<10181028>] backtrace_test_irq_callback+0x18/0x38
[<1013b96c>] tasklet_action+0x80/0xe4
[<1018ffc0>] rcu_process_callbacks+0x30/0x40
[<1013c2e0>] __do_softirq+0x148/0x198
[<1013c39c>] run_ksoftirqd+0x6c/0x120
[<101174bc>] schedule+0x30/0x74
[<101546f4>] kthread+0xac/0xb4
[<1010405c>] ret_from_kernel_thread+0x1c/0x24
Testing a saved backtrace.
The following trace is a kernel self test and not a bug!
[<10124bd4>] save_stack_trace+0x28/0x60
[<10181140>] backtrace_regression_test+0xf8/0x130
[<10118eac>] do_one_initcall+0x54/0x284
[<107a1abc>] kernel_init+0x1a8/0x270
[<1010405c>] ret_from_kernel_thread+0x1c/0x24
[<ffffffff>] 0xffffffff
====[ end of backtrace testing ]====
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
msgmni has been set to 238
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
start plist test
end plist test
PDC Stable Storage facility v0.30
STI GSC/PCI core graphics driver Version 0.9a
id 2bcb015a-9a02587, conforms to spec rev. 8.04
graphics card name: HPA4071B
id 2d08c0a7-9a02587, conforms to spec rev. 8.07
graphics card name: HPA4450AX1024
id 2d08c0a7-9a02587, conforms to spec rev. 8.07
graphics card name: INTERNAL_EG_X1024
sticon: Initializing STI text console.
Console: switching to colour STI console 160x64
Console: switching to colour frame buffer device 160x64
fb0: stifb 1280x1024-32 frame buffer device, HPA4071B, id: 2bcb015a, mmio: 0xfa100000
fb1: stifb 1024x768-8 frame buffer device, HPA4450AX1024, id: 2d08c0a7, mmio: 0xf4100000
fb2: stifb 1024x768-8 frame buffer device, INTERNAL_EG_X1024, id: 2d08c0a7, mmio: 0xf8100000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
8:16:4: ttyS0 at MMIO 0xffd05800 (irq = 16) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
8:0:63: ttyS1 at MMIO 0xfff83800 (irq = 22) is a 16550A
Linux agpgart interface v0.103
parport_init_chip: initialize bidirectional-mode.
parport0: PC-style at 0xffd02800, irq 19 [PCSPP,TRISTATE]
parport0: fix this legacy no-device port driver!
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
zalon_probe: Zalon version 1, IRQ 67
ncr53c720-0: rev 0xf irq 67
ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential
scsi0 : ncr53c8xx-3.4.3g
scsi 0:0:6:0: Direct-Access SEAGATE ST32171W HP03 PQ: 0 ANSI: 2
scsi target0:0:6: Beginning Domain Validation
scsi target0:0:6: asynchronous
scsi target0:0:6: wide asynchronous
scsi target0:0:6: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
scsi target0:0:6: Domain Validation skipping write tests
scsi target0:0:6: Ending Domain Validation
53c700: Version 2.8 By James.Bottomley@xxxxxxxxxxxxxxxxxxxxx
scsi1: 53c710 rev 2
scsi1 : LASI SCSI 53c700
scsi 1:0:1:0: CD-ROM PHILIPS PCA80SC V3-0 PQ: 0 ANSI: 2
scsi target1:0:1: Beginning Domain Validation
scsi target1:0:1: asynchronous
scsi target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
scsi target1:0:1: Domain Validation skipping write tests
scsi target1:0:1: Ending Domain Validation
st: Version 20101219, fixed bufsize 32768, s/g segs 256
sd 0:0:6:0: [sda] 4194685 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:6:0: [sda] Write Protect is off
sr0: scsi-1 drive
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 0:0:6:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:6:0: Attached scsi generic sg0 type 0
sr 1:0:1:0: Attached scsi generic sg1 type 5
LASI 82596 driver - Revision: 1.30
Found i82596 at 0xffd07000, IRQ 18
eth0: 82596 at 0xffd07000, 08:00:09:ef:34:f5 IRQ 18.
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
serio: gsc-ps2-keyboard port at 0x0081a000 irq 21 @ 8:16:7
serio: gsc-ps2-mouse port at 0x0081c100 irq 21 @ 8:16:8
sda: sda1 sda2 sda3 < sda5 sda6 >
mousedev: PS/2 mouse device common for all mice
rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: uevent: version 1.0.3
sd 0:0:6:0: [sda] Attached SCSI disk
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-generic rtc-generic: setting system clock to 1987-04-12 22:08:53 UTC (545263733)
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.178.50, my address is 192.168.178.65
IP-Config: Complete:
device=eth0, addr=192.168.178.65, mask=255.255.255.0, gw=192.168.178.1
host=b160, domain=box, nis-domain=(none)
bootserver=192.168.178.50, rootserver=192.168.178.50, rootpath=
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
attempt to access beyond end of device
sda3: rw=0, want=4, limit=2
EXT3-fs (sda3): error: unable to read superblock
attempt to access beyond end of device
sda3: rw=0, want=4, limit=2
EXT2-fs (sda3): error: unable to read superblock
swapper: sending ioctl 5310 to a partition!
swapper: sending ioctl 5310 to a partition!
attempt to access beyond end of device
sda3: rw=0, want=66, limit=2
isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
List of all partitions:
0b00 1048575 sr0 driver: sr
0800 2097342 sda driver: sd
0801 32098 sda1 00000000-0000-0000-0000-000000000000
0802 128520 sda2 00000000-0000-0000-0000-000000000000
0803 1 sda3 00000000-0000-0000-0000-000000000000
0805 1791216 sda5 00000000-0000-0000-0000-000000000000
0806 144553 sda6 00000000-0000-0000-0000-000000000000
No filesystem could mount root, tried: ext3 ext2 vfat iso9660
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3)
Backtrace:
[<1011b070>] show_stack+0x18/0x28
[<101148f8>] dump_stack+0x1c/0x2c
[<101149dc>] panic+0xd4/0x28c
[<107a292c>] mount_block_root+0x254/0x28c
[<107a2a10>] mount_root+0xac/0x138
[<107a2b38>] prepare_namespace+0x9c/0x1f4
[<107a1b28>] kernel_init+0x214/0x270
[<1010405c>] ret_from_kernel_thread+0x1c/0x24
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: 'HOME=/ root=/dev/sda3 pa64root=sda5 ip=bootp panic_timeout=60 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux'
Selected kernel: /vmlinux from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing...
This box can boot either 32 or 64-bit kernels...Only see a 32-bit kernel, using thatELF32 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 6647808 mediaptr 0x1000
Segment 1 load 007a0000 size 185472 mediaptr 0x658000
Segment 2 load 007ce000 size 145080 mediaptr 0x686000
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.0-rc6-32bit+ (deller@p100) (gcc version 4.3.3 (GCC) ) #7 Sat May 12 22:55:41 CEST 2012
unwind_init: start = 0x106a8000, end = 0x106ebdc0, entries = 17372
WARNING: Out of order unwind entry! 106a95c0 and 106a95d0
WARNING: Out of order unwind entry! 106a95d0 and 106a95e0
WARNING: Out of order unwind entry! 106aa090 and 106aa0a0
WARNING: Out of order unwind entry! 106aa0a0 and 106aa0b0
WARNING: Out of order unwind entry! 106aa110 and 106aa120
WARNING: Out of order unwind entry! 106aa120 and 106aa130
WARNING: Out of order unwind entry! 106aa140 and 106aa150
WARNING: Out of order unwind entry! 106aa150 and 106aa160
WARNING: Out of order unwind entry! 106aa160 and 106aa170
WARNING: Out of order unwind entry! 106aa170 and 106aa180
WARNING: Out of order unwind entry! 106aa180 and 106aa190
WARNING: Out of order unwind entry! 106aa190 and 106aa1a0
WARNING: Out of order unwind entry! 106aa1a0 and 106aa1b0
WARNING: Out of order unwind entry! 106aa1b0 and 106aa1c0
WARNING: Out of order unwind entry! 106aa1c0 and 106aa1d0
WARNING: Out of order unwind entry! 106aa1d0 and 106aa1e0
WARNING: Out of order unwind entry! 106aa1e0 and 106aa1f0
WARNING: Out of order unwind entry! 106aa1f0 and 106aa200
WARNING: Out of order unwind entry! 106aa210 and 106aa220
WARNING: Out of order unwind entry! 106aa220 and 106aa230
FP[0] enabled: Rev 1 Model 19
The 32-bit Kernel has started...
bootconsole [ttyB0] enabled
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 00005dc0 00000481 00000000 00000002 777c3e84 100000f0 00000008 000000b2 000000b2
vers 00000301
CPUID vers 19 rev 11 (0x0000026b)
capabilities 0x7
model 9000/785/C3700
Total Memory: 2048 MB
LCD display at f05d0008,f05d0000 registered
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520192
Kernel command line: HOME=/ root=/dev/sda3 pa64root=sda5 ip=bootp panic_timeout=60 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 2065788k/2097152k available (4505k kernel code, 31364k reserved, 1964k data, 328k init)
virtual kernel memory layout:
vmalloc : 0x00008000 - 0x0f000000 ( 239 MB)
memory : 0x10000000 - 0x90000000 (2048 MB)
.init : 0x107a0000 - 0x107f2000 ( 328 kB)
.data : 0x10566690 - 0x107517b0 (1964 kB)
.text : 0x10100000 - 0x10566690 (4505 kB)
NR_IRQS:96
Console: colour dummy device 128x48
Calibrating delay loop... 1495.85 BogoMIPS (lpj=7479296)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
xor: measuring software checksum speed
8regs : 1808.800 MB/sec
8regs_prefetch: 1727.600 MB/sec
32regs : 1444.800 MB/sec
32regs_prefetch: 1431.200 MB/sec
xor: using function: 8regs (1808.800 MB/sec)
atomic64 test passed
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. Astro BC Runway Port at 0xfed00000 [10] { 12, 0x0, 0x582, 0x0000b }
2. Elroy PCI Bridge at 0xfed30000 [10/0] { 13, 0x0, 0x782, 0x0000a }
3. Elroy PCI Bridge at 0xfed32000 [10/1] { 13, 0x0, 0x782, 0x0000a }
4. Elroy PCI Bridge at 0xfed38000 [10/4] { 13, 0x0, 0x782, 0x0000a }
5. Elroy PCI Bridge at 0xfed3c000 [10/6] { 13, 0x0, 0x782, 0x0000a }
6. Allegro W2 at 0xfffa0000 [32] { 0, 0x0, 0x5dc, 0x00004 }
7. Memory at 0xfed10200 [49] { 1, 0x0, 0x09c, 0x00009 }
CPU(s): 1 x PA8700 (PCX-W2) at 750.000000 MHz
Setting cache flush threshold to a20 (1 CPUs online)
SBA found Astro 2.1 at 0xfed00000
Elroy version TR4.0 (0x5) found at 0xfed30000
LBA 10:0: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x1fff]
pci_bus 0000:00: root bus resource [mem 0xf2000000-0xf23fffff]
PCI: Enabled native mode for NS87415 (pif=0x8f)
Elroy version TR4.0 (0x5) found at 0xfed32000
LBA 10:1: PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff])
pci_bus 0000:01: root bus resource [mem 0xf6000000-0xf6ffffff]
pci_bus 0000:01: root bus resource [mem 0xf2400000-0xf27fffff]
pci 0000:01:04.0: no compatible bridge window for [mem 0xf6000000-0xf7ffffff]
iosapic: no IRTE for 0000:01:04.0 (IRQ not connected?)
pci 0000:01:05.0: no compatible bridge window for [mem 0xf8000000-0xf8ffffff pref]
iosapic: no IRTE for 0000:01:05.0 (IRQ not connected?)
pci 0000:01:06.0: PCI bridge to [bus 02-ff]
pci 0000:01:06.0: can't handle 64-bit address space for bridge
pci 0000:01:06.0: no compatible bridge window for [??? 0x00000000 flags 0x0]
pci 0000:01:06.0: no compatible bridge window for [mem 0xf9000000-0xfbffffff]
pci 0000:01:06.0: no compatible bridge window for [??? 0x00000000 flags 0x0]
pci 0000:01:06.0: no compatible bridge window for [??? 0x00000000 flags 0x0]
pci 0000:01:06.0: device not available (can't reserve [mem 0xf9000000-0xfbffffff])
pci 0000:01:06.0: Error enabling bridge (-22), continuing
Elroy version TR4.0 (0x5) found at 0xfed38000
LBA 10:4: PCI host bridge to bus 0000:03
pci_bus 0000:03: root bus resource [io 0x28000-0x29fff] (bus address [0x8000-0x9fff])
pci_bus 0000:03: root bus resource [mem 0xf3000000-0xf33fffff]
Elroy version TR4.0 (0x5) found at 0xfed3c000
LBA 10:6: PCI host bridge to bus 0000:04
pci_bus 0000:04: root bus resource [io 0x3c000-0x3dfff] (bus address [0xc000-0xdfff])
pci_bus 0000:04: root bus resource [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:04: root bus resource [mem 0xf3800000-0xf3bfffff]
iosapic: hpa not registered for 0000:04:02.0
powersw: Soft power switch at 0xf0400804 enabled.
bio: create slab <bio-0> at 0
raid6: int32x1 434 MB/s
raid6: int32x2 499 MB/s
raid6: int32x4 530 MB/s
raid6: int32x8 404 MB/s
raid6: using algorithm int32x4 (530 MB/s)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource cr16
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 49152 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 49152 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SuperIO: Found NS87560 Legacy I/O device at 0000:00:0e.1 (IRQ 67)
SuperIO: Serial port 1 at 0x3f8
SuperIO: Serial port 2 at 0x2f8
SuperIO: Parallel port at 0x378
SuperIO: Floppy controller at 0x3f0
SuperIO: ACPI at 0x7e0
SuperIO: USB regulator enabled
Enabling PDC chassis warnings support v0.05
Initializing RT-Tester: OK
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
Backtrace:
[<1011b070>] show_stack+0x18/0x28
[<101148f8>] dump_stack+0x1c/0x2c
[<10181098>] backtrace_regression_test+0x50/0x130
[<10118eac>] do_one_initcall+0x54/0x284
[<107a1abc>] kernel_init+0x1a8/0x270
[<1010405c>] ret_from_kernel_thread+0x1c/0x24
Testing a backtrace from irq context.
The following trace is a kernel self test and not a bug!
Backtrace:
[<1011b070>] show_stack+0x18/0x28
[<101148f8>] dump_stack+0x1c/0x2c
[<10181028>] backtrace_test_irq_callback+0x18/0x38
[<1013b96c>] tasklet_action+0x80/0xe4
[<1018ffc0>] rcu_process_callbacks+0x30/0x40
[<1013c2e0>] __do_softirq+0x148/0x198
[<1013c39c>] run_ksoftirqd+0x6c/0x120
[<101174bc>] schedule+0x30/0x74
[<101546f4>] kthread+0xac/0xb4
[<1010405c>] ret_from_kernel_thread+0x1c/0x24
Testing a saved backtrace.
The following trace is a kernel self test and not a bug!
[<10124bd4>] save_stack_trace+0x28/0x60
[<10181140>] backtrace_regression_test+0xf8/0x130
[<10118eac>] do_one_initcall+0x54/0x284
[<107a1abc>] kernel_init+0x1a8/0x270
[<1010405c>] ret_from_kernel_thread+0x1c/0x24
[<ffffffff>] 0xffffffff
====[ end of backtrace testing ]====
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
msgmni has been set to 4034
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
start plist test
end plist test
PDC Stable Storage facility v0.30
STI GSC/PCI core graphics driver Version 0.9a
sti 0000:01:04.0: device not available (can't reserve [mem 0xf6000000-0xf7ffffff])
sti 0000:01:04.0: Cannot enable PCI device
sti: probe of 0000:01:04.0 failed with error -22
STI PCI graphic ROM found at f3800000 (2048 kB), fb at f4000000 (32 MB)
id 35acda30-9a02587, conforms to spec rev. 8.0d
graphics card name: A1262A
sticon: Initializing STI text console.
Console: switching to colour STI console 128x48
matroxfb 0000:02:00.0: enabling SERR and PARITY (0007 -> 0147)
matroxfb: Matrox G450 detected
PInS memtype = 4
matroxfb: cannot determine memory size
matroxfb: probe of 0000:02:00.0 failed with error -1
stifb: 'A1262A' (id: 0x35acda30) not supported.
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ns87415 0000:00:0e.0: IDE controller (0x100b:0x0002 rev 0x03)
ns87415 0000:00:0e.0: 100% native mode on irq 7
ide0: BM-DMA at 0x0a00-0x0a07
ide1: BM-DMA at 0x0a08-0x0a0f
hda: CD-532E-B, ATAPI CD/DVD-ROM drive
ide0 at 0xf00-0xf07,0xe02 on irq 7
ide1 at 0xd00-0xd07,0xb02 on irq 7
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 32X CD-ROM drive, 128kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 68
sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking
sym0: SCSI BUS has been reset.
sym0: SCSI BUS mode change from SE to SE.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
sym1: <896> rev 0x7 at pci 0000:00:0f.1 irq 68
sym1: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.3
scsi 1:0:5:0: Direct-Access SEAGATE ST39102LC HP01 PQ: 0 ANSI: 2
scsi target1:0:5: tagged command queuing enabled, command queue depth 16.
scsi target1:0:5: Beginning Domain Validation
scsi target1:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
scsi target1:0:5: Domain Validation skipping write tests
scsi target1:0:5: Ending Domain Validation
scsi 1:0:6:0: Direct-Access HP 36.4G ST336607LC HPC3 PQ: 0 ANSI: 3
scsi target1:0:6: tagged command queuing enabled, command queue depth 16.
scsi target1:0:6: Beginning Domain Validation
scsi target1:0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
scsi target1:0:6: Domain Validation skipping write tests
scsi target1:0:6: Ending Domain Validation
st: Version 20101219, fixed bufsize 32768, s/g segs 256
sd 1:0:5:0: Attached scsi generic sg0 type 0
sd 1:0:6:0: Attached scsi generic sg1 type 0
Linux Tulip driver version 1.1.15 (Feb 27, 2007)
tulip0: no phy info, aborting mtable build
tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1
net eth0: Digital DS21142/43 Tulip rev 65 at Port 0x1000, 00:30:6e:48:aa:64, IRQ 65
tulip1: EEPROM default media type Autosense
tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
tulip1: Index #1 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block
tulip1: Index #2 - Media AUI (#2) described by a 21142 Serial PHY (2) block
tulip1: MII transceiver #1 config 3100 status 7849 advertising 0101
sd 1:0:5:0: [sda] 17773524 512-byte logical blocks: (9.10 GB/8.47 GiB)
sd 1:0:6:0: [sdb] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB)
net eth1: Digital DS21142/43 Tulip rev 33 at Port 0x28000, 00:60:b0:7a:12:89, IRQ 71
sd 1:0:6:0: [sdb] Write Protect is off
LASI 82596 driver - Revision: 1.30
sd 1:0:6:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0e.2: OHCI Host Controller
ohci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0e.2: irq 1, io mem 0xf2007000
sd 1:0:5:0: [sda] Write Protect is off
sd 1:0:5:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.0-rc6-32bit+ ohci_hcd
usb usb1: SerialNumber: 0000:00:0e.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
mousedev: PS/2 mouse device common for all mice
sdb: sdb1 sdb2 sdb3 sdb4
rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
sda: sda1 sda2 sda3 sda4
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx
sd 1:0:6:0: [sdb] Attached SCSI disk
sd 1:0:5:0: [sda] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-generic rtc-generic: setting system clock to 2012-05-12 20:57:11 UTC (1336856231)
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.178.50, my address is 192.168.178.66
IP-Config: Complete:
device=eth0, addr=192.168.178.66, mask=255.255.255.0, gw=192.168.178.1
host=c3000, domain=box, nis-domain=(none)
bootserver=192.168.178.50, rootserver=192.168.178.50, rootpath=
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 328k freed
Backtrace:
[<1021dc3c>] mpage_readpages+0xf0/0x16c
[<10257e88>] ext3_readpages+0x28/0x38
[<101acb90>] __do_page_cache_readahead+0x1e0/0x27c
[<101acc5c>] ra_submit+0x30/0x40
[<101acee0>] ondemand_readahead+0xd0/0x26c
ohci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0e.2: irq 1, io mem 0xf2007000
sd 1:0:5:0: [sda] Write Protect is off
sd 1:0:5:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.0-rc6-32bit+ ohci_hcd
usb usb1: SerialNumber: 0000:00:0e.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
mousedev: PS/2 mouse device common for all mice
sdb: sdb1 sdb2 sdb3 sdb4
rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
sda: sda1 sda2 sda3 sda4
[<101acee0>] ondemand_readahead+0xd0/0x26c
[<101acee0>] ondemand_readahead+0xd0/0x26c
[<101acee0>] ondemand_readahead+0xd0/0x26c
[<101ad1a8>] page_cache_sync_readahead+0x44/0x74
[<101a38e4>] generic_file_aio_read+0x400/0x764
[<101e243c>] do_sync_read+0xd4/0x130
[<101e32f4>] vfs_read+0xac/0x158
[<101ea47c>] kernel_read+0x40/0x5c
[<101ea58c>] prepare_binprm+0xf4/0x130
[<101eae3c>] do_execve+0x2b8/0x3a4
[<1012199c>] sys_execve+0x64/0x94
[<10104084>] __execve+0x20/0x34
[<1019faf8>] perf_output_begin+0x150/0x240
[<101a83e8>] __free_pages+0x54/0x64
Kernel Fault: Code=26 regs=8fc30bc0 (Addr=00000034)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001101111111100001111 Not tainted
r00-03 0006ff0f 8fc30c40 1021d928 8fc30b00
r04-07 00000001 00000001 00000001 8fc30a50
r08-11 00000001 00000000 00000004 00000001
r12-15 8f8024c0 0000000c 10925fa0 8f812598
r16-19 00000013 8fc30b08 00000004 1021d324
r20-23 8fc30a48 00060370 00000002 8f8124d8
r24-27 70030600 00000000 00000000 106fa020
r28-31 10645000 00000000 8fc30bc0 00000002
sr00-03 00000000 00000000 00000000 00000000
sr04-07 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 1021d784 1021d788
IIR: 69330068 ISR: 00000000 IOR: 00000034
CPU: 0 CR30: 8fc30000 CR31: d23345e2
ORIG_R28: 8fdf2000
IAOQ[0]: do_mpage_readpage+0x284/0x5d4
IAOQ[1]: do_mpage_readpage+0x288/0x5d4
RP(r2): do_mpage_readpage+0x428/0x5d4
Backtrace:
[<1021dc3c>] mpage_readpages+0xf0/0x16c
[<10257e88>] ext3_readpages+0x28/0x38
[<101acb90>] __do_page_cache_readahead+0x1e0/0x27c
[<101acc5c>] ra_submit+0x30/0x40
[<101acee0>] ondemand_readahead+0xd0/0x26c
[<101ad1a8>] page_cache_sync_readahead+0x44/0x74
[<101a38e4>] generic_file_aio_read+0x400/0x764
[<101e243c>] do_sync_read+0xd4/0x130
[<101e32f4>] vfs_read+0xac/0x158
[<101ea47c>] kernel_read+0x40/0x5c
[<101ea58c>] prepare_binprm+0xf4/0x130
[<101eae3c>] do_execve+0x2b8/0x3a4
[<1012199c>] sys_execve+0x64/0x94
[<10104084>] __execve+0x20/0x34
[<1019faf8>] perf_output_begin+0x150/0x240
[<101a83e8>] __free_pages+0x54/0x64
Kernel panic - not syncing: Kernel Fault
Command line for kernel: 'HOME=/ root=/dev/sda5 pa64root=sda5 ip=bootp panic_timeout=60 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux'
Selected kernel: /vmlinux from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 32-bit kernelELF32 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 6647808 mediaptr 0x1000
Segment 1 load 007a0000 size 185472 mediaptr 0x658000
Segment 2 load 007ce000 size 145080 mediaptr 0x686000
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.0-rc6-32bit+ (deller@p100) (gcc version 4.3.3 (GCC) ) #7 Sat May 12 22:55:41 CEST 2012
unwind_init: start = 0x106a8000, end = 0x106ebdc0, entries = 17372
WARNING: Out of order unwind entry! 106a95c0 and 106a95d0
WARNING: Out of order unwind entry! 106a95d0 and 106a95e0
WARNING: Out of order unwind entry! 106aa090 and 106aa0a0
WARNING: Out of order unwind entry! 106aa0a0 and 106aa0b0
WARNING: Out of order unwind entry! 106aa110 and 106aa120
WARNING: Out of order unwind entry! 106aa120 and 106aa130
WARNING: Out of order unwind entry! 106aa140 and 106aa150
WARNING: Out of order unwind entry! 106aa150 and 106aa160
WARNING: Out of order unwind entry! 106aa160 and 106aa170
WARNING: Out of order unwind entry! 106aa170 and 106aa180
WARNING: Out of order unwind entry! 106aa180 and 106aa190
WARNING: Out of order unwind entry! 106aa190 and 106aa1a0
WARNING: Out of order unwind entry! 106aa1a0 and 106aa1b0
WARNING: Out of order unwind entry! 106aa1b0 and 106aa1c0
WARNING: Out of order unwind entry! 106aa1c0 and 106aa1d0
WARNING: Out of order unwind entry! 106aa1d0 and 106aa1e0
WARNING: Out of order unwind entry! 106aa1e0 and 106aa1f0
WARNING: Out of order unwind entry! 106aa1f0 and 106aa200
WARNING: Out of order unwind entry! 106aa210 and 106aa220
WARNING: Out of order unwind entry! 106aa220 and 106aa230
FP[0] enabled: Rev 1 Model 13
The 32-bit Kernel has started...
bootconsole [ttyB0] enabled
Initialized PDC Console for debugging.
Determining PDC firmware type: Snake.
model 000060a0 00000481 00000000 00000000 773c7d2c 00000000 00000004 00000072 00000072
vers 0000000c
model 9000/715
Total Memory: 160 MB
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 40640
Kernel command line: HOME=/ root=/dev/sda5 pa64root=sda5 ip=bootp panic_timeout=60 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
allocated 327680 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 154668k/163840k available (4505k kernel code, 9172k reserved, 1964k data, 328k init)
virtual kernel memory layout:
vmalloc : 0x00810000 - 0x0f000000 ( 231 MB)
memory : 0x10000000 - 0x1a000000 ( 160 MB)
.init : 0x107a0000 - 0x107f2000 ( 328 kB)
.data : 0x10566690 - 0x107517b0 (1964 kB)
.text : 0x10100000 - 0x10566690 (4505 kB)
NR_IRQS:96
Console: colour dummy device 128x48
Calibrating delay loop... 63.07 BogoMIPS (lpj=315392)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
xor: measuring software checksum speed
8regs : 44.800 MB/sec
8regs_prefetch: 44.400 MB/sec
32regs : 72.000 MB/sec
32regs_prefetch: 71.600 MB/sec
xor: using function: 32regs (72.000 MB/sec)
atomic64 test passed
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. Mirage Jr GSC Builtin Graphics at 0xf8000000 [1] { 10, 0x0, 0x012, 0x00085 }
2. Mirage Jr Core BA at 0xf0100000 [2] { 11, 0x0, 0x028, 0x00081 }
3. Mirage Jr Core SCSI at 0xf0106000 [2/0/1] { 10, 0x0, 0x028, 0x00082 }
4. Mirage Jr Core LAN (802.3) at 0xf0107000 [2/0/2] { 10, 0x0, 0x028, 0x0008a }
5. Mirage Jr Core RS-232 at 0xf0105000 [2/0/4] { 10, 0x0, 0x028, 0x0008c }
6. Mirage Jr Core Centronics at 0xf0102000 [2/0/6] { 10, 0x0, 0x028, 0x00074 }
7. Mirage Jr Audio at 0xf0104000 [2/0/8] { 10, 0x0, 0x028, 0x0007b }
8. Mirage Jr Core PC Floppy at 0xf010a000 [2/0/10] { 10, 0x0, 0x028, 0x00083 }
9. Mirage Jr Core PS/2 Port at 0xf0108000 [2/0/11] { 10, 0x0, 0x028, 0x00084 }
10. Mirage Jr Core PS/2 Port at 0xf0108100 [2/0/12] { 10, 0x0, 0x028, 0x00084 }
11. Mirage Jr Wax EISA BA at 0xfc000000 [4] { 11, 0x0, 0x028, 0x00090 }
12. Mirage Jr Wax BA at 0xf0200000 [5] { 11, 0x0, 0x012, 0x0008e }
13. Mirage Jr Wax HIL at 0xf0201000 [5/0/1] { 10, 0x0, 0x012, 0x00073 }
14. Mirage Jr Wax RS-232 at 0xf0202000 [5/0/2] { 10, 0x0, 0x012, 0x0008c }
15. Mirage Jr (715/64) at 0xfffbe000 [8] { 0, 0x0, 0x60a, 0x00004 }
16. Memory at 0xfffbf000 [9] { 1, 0x0, 0x04a, 0x00009 }
CPU(s): 1 x PA7100LC (PCX-L) at 64.000000 MHz
Setting cache flush threshold to 3e0 (1 CPUs online)
Lasi version 0 at 0xf0100000 found.
LED display at f00e0000 registered
wax at 0xf0200000 found.
Wax EISA Adapter found at 0xfc000000
Enumerating EISA bus
EISA: Probing bus 0 at 4
EISA: Mainboard HWPC000 detected.
EISA: Detected 0 cards.
powersw: Gecko-style soft power switch enabled.
bio: create slab <bio-0> at 0
raid6: int32x1 28 MB/s
raid6: int32x2 31 MB/s
raid6: int32x4 37 MB/s
raid6: int32x8 17 MB/s
raid6: using algorithm int32x4 (37 MB/s)
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource cr16
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 128 (order: 0, 6144 bytes)
UDP-Lite hash table entries: 128 (order: 0, 6144 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Chassis warnings not supported.
Initializing RT-Tester: OK
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
Backtrace:
[<1011b070>] show_stack+0x18/0x28
[<101148f8>] dump_stack+0x1c/0x2c
[<10181098>] backtrace_regression_test+0x50/0x130
[<10118eac>] do_one_initcall+0x54/0x284
[<107a1abc>] kernel_init+0x1a8/0x270
[<1010405c>] ret_from_kernel_thread+0x1c/0x24
Testing a backtrace from irq context.
The following trace is a kernel self test and not a bug!
Backtrace:
[<1011b070>] show_stack+0x18/0x28
[<101148f8>] dump_stack+0x1c/0x2c
[<10181028>] backtrace_test_irq_callback+0x18/0x38
[<1013b96c>] tasklet_action+0x80/0xe4
[<1018ffc0>] rcu_process_callbacks+0x30/0x40
[<1013c2e0>] __do_softirq+0x148/0x198
[<1013c39c>] run_ksoftirqd+0x6c/0x120
[<101174bc>] schedule+0x30/0x74
[<101546f4>] kthread+0xac/0xb4
[<1010405c>] ret_from_kernel_thread+0x1c/0x24
Testing a saved backtrace.
The following trace is a kernel self test and not a bug!
[<ffffffff>] 0xffffffff
====[ end of backtrace testing ]====
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
msgmni has been set to 302
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
start plist test
end plist test
EISA EEPROM at 0x00810400
PDC Stable Storage facility v0.30
STI GSC/PCI core graphics driver Version 0.9a
id 2b4ded6d-40a00499, conforms to spec rev. 8.04
graphics card name: HPA208LC1024
sticon: Initializing STI text console.
Console: switching to colour STI console 128x48
Console: switching to colour frame buffer device 128x48
fb0: stifb 1024x768-8 frame buffer device, HPA208LC1024, id: 2b4ded6d, mmio: 0xf8100000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
2:0:4: ttyS0 at MMIO 0xf0105800 (irq = 18) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
5:0:2: ttyS1 at MMIO 0xf0202800 (irq = 25) is a 16550A
Linux agpgart interface v0.103
parport_init_chip: initialize bidirectional-mode.
parport0: PC-style at 0xf0102800, irq 19 [PCSPP,TRISTATE]
parport0: fix this legacy no-device port driver!
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
53c700: Version 2.8 By James.Bottomley@xxxxxxxxxxxxxxxxxxxxx
scsi0: 53c710 rev 2
scsi0 : LASI SCSI 53c700
scsi 0:0:6:0: Direct-Access QUANTUM FIREBALL_TM3200S 300X PQ: 0 ANSI: 2
scsi target0:0:6: Beginning Domain Validation
scsi 0:0:6:0: Enabling Tag Command Queuing
scsi target0:0:6: asynchronous
scsi target0:0:6: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
scsi target0:0:6: Domain Validation skipping write tests
scsi target0:0:6: Ending Domain Validation
st: Version 20101219, fixed bufsize 32768, s/g segs 256
sd 0:0:6:0: Attached scsi generic sg0 type 0
sd 0:0:6:0: [sda] 6281856 512-byte logical blocks: (3.21 GB/2.99 GiB)
LASI 82596 driver - Revision: 1.30
Found i82596 at 0xf0107000, IRQ 17
eth0: 82596 at 0xf0107000, 08:00:09:c2:9e:60 IRQ 17.
sd 0:0:6:0: [sda] Write Protect is off
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
sd 0:0:6:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
serio: gsc-ps2-keyboard port at 0x0081a000 irq 22 @ 2:0:11
serio: gsc-ps2-mouse port at 0x0081c100 irq 22 @ 2:0:12
mousedev: PS/2 mouse device common for all mice
rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-generic rtc-generic: setting system clock to 1970-01-04 11:04:35 UTC (299075)
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.178.50, my address is 192.168.178.64
IP-Config: Complete:
device=eth0, addr=192.168.178.64, mask=255.255.255.0, gw=192.168.178.1
host=pa64, domain=box, nis-domain=(none)
bootserver=192.168.178.50, rootserver=192.168.178.50, rootpath=
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:6:0: [sda] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda5): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
Freeing unused kernel memory: 328k freed
Backtrace:
[<1021dc3c>] mpage_readpages+0xf0/0x16c
[<10257e88>] ext3_readpages+0x28/0x38
[<101acb90>] __do_page_cache_readahead+0x1e0/0x27c
[<101acc5c>] ra_submit+0x30/0x40
[<101acee0>] ondemand_readahead+0xd0/0x26c
[<101ad1a8>] page_cache_sync_readahead+0x44/0x74
[<101a38e4>] generic_file_aio_read+0x400/0x764
[<101e243c>] do_sync_read+0xd4/0x130
[<101e32f4>] vfs_read+0xac/0x158
[<101ea47c>] kernel_read+0x40/0x5c
[<101ea58c>] prepare_binprm+0xf4/0x130
[<101eae3c>] do_execve+0x2b8/0x3a4
[<1012199c>] sys_execve+0x64/0x94
[<10104084>] __execve+0x20/0x34
[<10136374>] vprintk+0x1e8/0x488
[<101a83e8>] __free_pages+0x54/0x64
Kernel Fault: Code=26 regs=19c24bc0 (Addr=00000034)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001101111111100001111 Not tainted
r00-03 0006ff0f 19c24c40 1021d928 19c24b00
r04-07 00000001 00000001 00000001 19c24a50
r08-11 00000001 00000000 00000004 00000001
r12-15 19802280 0000000c 10803980 19811598
r16-19 00000013 19c24b08 00000004 1021d324
r20-23 19c24a48 00068345 00000004 198114d8
r24-27 45830600 00000000 00000000 106fa020
r28-31 10645000 00000000 19c24bc0 00000004
sr00-03 00000000 00000000 00000000 00000000
sr04-07 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 1021d784 1021d788
IIR: 69330068 ISR: 00000000 IOR: 00000034
CPU: 0 CR30: 19c24000 CR31: f00effff
ORIG_R28: 19e71c00
IAOQ[0]: do_mpage_readpage+0x284/0x5d4
IAOQ[1]: do_mpage_readpage+0x288/0x5d4
RP(r2): do_mpage_readpage+0x428/0x5d4
Backtrace:
[<1021dc3c>] mpage_readpages+0xf0/0x16c
[<10257e88>] ext3_readpages+0x28/0x38
[<101acb90>] __do_page_cache_readahead+0x1e0/0x27c
[<101acc5c>] ra_submit+0x30/0x40
[<101acee0>] ondemand_readahead+0xd0/0x26c
[<101ad1a8>] page_cache_sync_readahead+0x44/0x74
[<101a38e4>] generic_file_aio_read+0x400/0x764
[<101e243c>] do_sync_read+0xd4/0x130
[<101e32f4>] vfs_read+0xac/0x158
[<101ea47c>] kernel_read+0x40/0x5c
[<101ea58c>] prepare_binprm+0xf4/0x130
[<101eae3c>] do_execve+0x2b8/0x3a4
[<1012199c>] sys_execve+0x64/0x94
[<10104084>] __execve+0x20/0x34
[<10136374>] vprintk+0x1e8/0x488
[<101a83e8>] __free_pages+0x54/0x64
Kernel panic - not syncing: Kernel Fault
