Hello,
I'm tring 2.6.37 and 2.6.37+git on SMP L1000 64-bit. I'm getting IRQ
handler type mismatch for IRQs 64 and 65 on bootup. 2.6.37 crashed
aptitude (maybe unrelated), 2.6.37+git as of 2011-01-09 has worked fine
on two tries.
Full dmesg:
[ 0.000000] Linux version 2.6.37-03737-g0c21e3a (mroos@hernes) (gcc version 4.4.5 (GCC) ) #1 SMP Sun Jan 9 18:47:10 EET 2011
[ 0.000000] unwind_init: start = 0x4050f000, end = 0x4053cef0, entries = 11759
[ 0.000000] WARNING: Out of order unwind entry! 0000000040510720 and 0000000040510730
[ 0.000000] WARNING: Out of order unwind entry! 0000000040510730 and 0000000040510740
[ 0.000000] WARNING: Out of order unwind entry! 0000000040511330 and 0000000040511340
[ 0.000000] WARNING: Out of order unwind entry! 0000000040511340 and 0000000040511350
[ 0.000000] FP[0] enabled: Rev 1 Model 16
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] bootconsole [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: 64 bit PAT.
[ 0.000000] model 00005c90 00000491 00000000 00000002 2353fbcb 100000f0 00000008 000000b2 000000b2
[ 0.000000] vers 00000203
[ 0.000000] CPUID vers 17 rev 8 (0x00000228)
[ 0.000000] capabilities 0x1
[ 0.000000] model 9000/800/L1000-44
[ 0.000000] Total Memory: 3072 MB
[ 0.000000] On node 0 totalpages: 786432
[ 0.000000] free_area_init_node: node 0, pgdat 40554700, node_mem_map 40c25000
[ 0.000000] Normal zone: 10752 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 775680 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 10 pages/cpu @0000000043650000 s12032 r8192 d20736 u40960
[ 0.000000] pcpu-alloc: s12032 r8192 d20736 u40960 alloc=10*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] SMP: bootstrap CPU ID is 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775680
[ 0.000000] Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.6.37-03737-g0c21e3a
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 3083708k/3145728k available (3503k kernel code, 62020k reserved, 1476k data, 172k init)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB)
[ 0.000000] memory : 0x0000000040000000 - 0x0000000100000000 (3072 MB)
[ 0.000000] .init : 0x00000000406d4000 - 0x00000000406ff000 ( 172 kB)
[ 0.000000] .data : 0x000000004046bf10 - 0x00000000405dd200 (1476 kB)
[ 0.000000] .text : 0x0000000040100000 - 0x000000004046bf10 (3503 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=8
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 160x64
[ 0.130000] Calibrating delay loop... 878.18 BogoMIPS (lpj=4390912)
[ 0.400000] pid_max: default: 32768 minimum: 301
[ 0.400000] Mount-cache hash table entries: 256
[ 0.430000] Brought up 1 CPUs
[ 0.440000] NET: Registered protocol family 16
[ 0.440000] Searching for devices...
[ 0.910000] Found devices:
[ 0.910000] 1. Rhapsody DC- 440 at 0xfffffffffffa0000 [160] { 0, 0x0, 0x5c9, 0x00004 }
[ 0.920000] 2. Rhapsody DC- 440 at 0xfffffffffffa6000 [166] { 0, 0x0, 0x5c9, 0x00004 }
[ 0.920000] 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x095, 0x00009 }
[ 0.930000] 4. Astro BC Runway Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x582, 0x0000b }
[ 0.940000] 5. Elroy PCI Bridge at 0xfffffffffed30000 [0/0] { 13, 0x0, 0x782, 0x0000a }
[ 0.990000] 6. Elroy PCI Bridge at 0xfffffffffed32000 [0/1] { 13, 0x0, 0x782, 0x0000a }
[ 1.000000] 7. Elroy PCI Bridge at 0xfffffffffed34000 [0/2] { 13, 0x0, 0x782, 0x0000a }
[ 1.000000] 8. Elroy PCI Bridge at 0xfffffffffed36000 [0/3] { 13, 0x0, 0x782, 0x0000a }
[ 1.010000] 9. Elroy PCI Bridge at 0xfffffffffed38000 [0/4] { 13, 0x0, 0x782, 0x0000a }
[ 1.020000] 10. Elroy PCI Bridge at 0xfffffffffed3a000 [0/5] { 13, 0x0, 0x782, 0x0000a }
[ 1.410000] 11. Elroy PCI Bridge at 0xfffffffffed3c000 [0/6] { 13, 0x0, 0x782, 0x0000a }
[ 1.420000] 12. Elroy PCI Bridge at 0xfffffffffed3e000 [0/7] { 13, 0x0, 0x782, 0x0000a }
[ 1.430000] Enabling PDC_PAT chassis codes support v0.05
[ 1.760000] Releasing cpu 1 now, hpa=fffffffffffa6000
[ 1.770000] FP[1] enabled: Rev 1 Model 16
[ 1.780000] IRQ handler type mismatch for IRQ 64
[ 1.780000] current handler: timer
[ 1.790000] Backtrace:
[ 1.790000] [<000000004011ed24>] show_stack+0x14/0x20
[ 1.810000] [<00000000401174a8>] dump_stack+0x18/0x28
[ 1.810000] [<0000000040196cd0>] __setup_irq+0x4d0/0x500
[ 1.820000] [<0000000040196d40>] setup_irq+0x40/0x58
[ 1.820000] [<00000000406d7378>] init_IRQ+0xa8/0x130
[ 1.830000] [<00000000406d87c4>] smp_callin+0x144/0x1a8
[ 1.830000] [<00000000402011e4>] d_rehash+0x4c/0x60
[ 1.860000] [<00000000401f9330>] do_path_lookup+0xa0/0x140
[ 1.860000] [<00000000401fa72c>] do_filp_open+0x17c/0x780
[ 1.870000] [<0000000040142b78>] enqueue_task+0x60/0x88
[ 1.870000] [<000000004011b5f0>] _raw_spin_unlock_irqrestore+0x18/0x30
[ 1.880000] [<000000004014965c>] finish_task_switch+0x4c/0x150
[ 1.880000] [<000000004014b564>] schedule_tail+0x54/0x160
[ 1.910000] [<000000004010347c>] ret_from_kernel_thread+0x24/0x40
[ 1.910000]
[ 1.910000] IRQ handler type mismatch for IRQ 65
[ 1.920000] current handler: IPI
[ 1.920000] Backtrace:
[ 1.920000] [<000000004011ed24>] show_stack+0x14/0x20
[ 1.930000] [<00000000401174a8>] dump_stack+0x18/0x28
[ 1.930000] [<0000000040196cd0>] __setup_irq+0x4d0/0x500
[ 1.940000] [<0000000040196d40>] setup_irq+0x40/0x58
[ 1.940000] [<00000000406d73b4>] init_IRQ+0xe4/0x130
[ 1.960000] [<00000000406d87c4>] smp_callin+0x144/0x1a8
[ 1.970000] [<00000000402011e4>] d_rehash+0x4c/0x60
[ 1.970000] [<00000000401f9330>] do_path_lookup+0xa0/0x140
[ 1.980000] [<00000000401fa72c>] do_filp_open+0x17c/0x780
[ 1.980000] [<0000000040142b78>] enqueue_task+0x60/0x88
[ 1.990000] [<000000004011b5f0>] _raw_spin_unlock_irqrestore+0x18/0x30
[ 1.990000] [<000000004014965c>] finish_task_switch+0x4c/0x150
[ 2.030000] [<000000004014b564>] schedule_tail+0x54/0x160
[ 2.030000] [<000000004010347c>] ret_from_kernel_thread+0x24/0x40
[ 2.040000]
[ 2.130000] CPU(s): 2 x PA8500 (PCX-W) at 440.000000 MHz
[ 2.130000] Whole cache flush 333647 cycles, flushing 6287360 bytes 1074964 cycles
[ 2.130000] Setting cache flush threshold to 100000 (2 CPUs online)
[ 2.190000] SBA found Astro 2.1 at 0xfffffffffed00000
[ 2.200000] Elroy version TR4.0 (0x5) found at 0xfffffffffed30000
[ 2.230000] pci 0000:00:00.0: [1011:0019] type 0 class 0x000200
[ 2.230000] pci 0000:00:00.0: reg 10: [io 0x0000-0x007f]
[ 2.230000] pci 0000:00:00.0: reg 14: [mem 0x00000000-0x000003ff]
[ 2.230000] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
[ 2.230000] pci 0000:00:01.0: [1000:000b] type 0 class 0x000100
[ 2.230000] pci 0000:00:01.0: reg 10: [io 0x0000-0x00ff]
[ 2.230000] pci 0000:00:01.0: reg 14: [mem 0x00000000-0x000003ff 64bit]
[ 2.230000] pci 0000:00:01.0: reg 1c: [mem 0x00000000-0x00001fff 64bit]
[ 2.230000] pci 0000:00:01.0: supports D1 D2
[ 2.230000] pci 0000:00:01.1: [1000:000b] type 0 class 0x000100
[ 2.230000] pci 0000:00:01.1: reg 10: [io 0x0000-0x00ff]
[ 2.230000] pci 0000:00:01.1: reg 14: [mem 0xf8020000-0xf80203ff 64bit]
[ 2.230000] pci 0000:00:01.1: reg 1c: [mem 0xf8040000-0xf8041fff 64bit]
[ 2.230000] pci 0000:00:01.1: supports D1 D2
[ 2.230000] pci 0000:00:02.0: [1000:000f] type 0 class 0x000100
[ 2.230000] pci 0000:00:02.0: reg 10: [io 0x0000-0x00ff]
[ 2.230000] pci 0000:00:02.0: reg 14: [mem 0x00000000-0x000000ff]
[ 2.230000] pci 0000:00:02.0: reg 18: [mem 0x00000000-0x00000fff]
[ 2.230000] pci 0000:00:02.1: [1000:000f] type 0 class 0x000100
[ 2.230000] pci 0000:00:02.1: reg 10: [io 0x0000-0x00ff]
[ 2.230000] pci 0000:00:02.1: reg 14: [mem 0x00000000-0x000000ff]
[ 2.230000] pci 0000:00:02.1: reg 18: [mem 0x00000000-0x00000fff]
[ 2.240000] pci 0000:00:04.0: [103c:1048] type 0 class 0x000700
[ 2.240000] pci 0000:00:04.0: reg 10: [mem 0xf8000000-0xf8000fff]
[ 2.240000] pci 0000:00:04.0: reg 14: [io 0x0000-0x003f]
[ 2.240000] pci 0000:00:05.0: [103c:1048] type 0 class 0x000700
[ 2.240000] pci 0000:00:05.0: reg 10: [mem 0x00000000-0x00000fff]
[ 2.240000] pci 0000:00:05.0: reg 14: [io 0x0000-0x003f]
[ 2.240000] pci 0000:00:00.0: BAR 6: assigned [mem 0xfffffffff8080000-0xfffffffff80bffff pref]
[ 2.300000] pci 0000:00:01.0: BAR 3: assigned [mem 0xfffffffff8002000-0xfffffffff8003fff 64bit]
[ 2.440000] pci 0000:00:01.0: BAR 3: set to [mem 0xfffffffff8002000-0xfffffffff8003fff 64bit] (PCI address [0xf8002000-0xf8003fff])
[ 2.460000] pci 0000:00:02.0: BAR 2: assigned [mem 0xfffffffff8001000-0xfffffffff8001fff]
[ 2.460000] pci 0000:00:02.0: BAR 2: set to [mem 0xfffffffff8001000-0xfffffffff8001fff] (PCI address [0xf8001000-0xf8001fff])
[ 2.730000] pci 0000:00:02.1: BAR 2: assigned [mem 0xfffffffff8004000-0xfffffffff8004fff]
[ 2.860000] pci 0000:00:02.1: BAR 2: set to [mem 0xfffffffff8004000-0xfffffffff8004fff] (PCI address [0xf8004000-0xf8004fff])
[ 3.000000] pci 0000:00:05.0: BAR 0: assigned [mem 0xfffffffff8005000-0xfffffffff8005fff]
[ 3.140000] pci 0000:00:05.0: BAR 0: set to [mem 0xfffffffff8005000-0xfffffffff8005fff] (PCI address [0xf8005000-0xf8005fff])
[ 3.290000] pci 0000:00:00.0: BAR 1: assigned [mem 0xfffffffff8006000-0xfffffffff80063ff]
[ 3.420000] pci 0000:00:00.0: BAR 1: set to [mem 0xfffffffff8006000-0xfffffffff80063ff] (PCI address [0xf8006000-0xf80063ff])
[ 3.440000] pci 0000:00:01.0: BAR 1: assigned [mem 0xfffffffff8007000-0xfffffffff80073ff 64bit]
[ 3.450000] pci 0000:00:01.0: BAR 1: set to [mem 0xfffffffff8007000-0xfffffffff80073ff 64bit] (PCI address [0xf8007000-0xf80073ff])
[ 3.710000] pci 0000:00:01.0: BAR 0: assigned [io 0x0100-0x01ff]
[ 3.720000] pci 0000:00:01.0: BAR 0: set to [io 0x0100-0x01ff] (PCI address [0x100-0x1ff])
[ 3.990000] pci 0000:00:01.1: BAR 0: assigned [io 0x0200-0x02ff]
[ 4.000000] pci 0000:00:01.1: BAR 0: set to [io 0x0200-0x02ff] (PCI address [0x200-0x2ff])
[ 4.130000] pci 0000:00:02.0: BAR 0: assigned [io 0x0300-0x03ff]
[ 4.140000] pci 0000:00:02.0: BAR 0: set to [io 0x0300-0x03ff] (PCI address [0x300-0x3ff])
[ 4.270000] pci 0000:00:02.0: BAR 1: assigned [mem 0xfffffffff8008000-0xfffffffff80080ff]
[ 4.280000] pci 0000:00:02.0: BAR 1: set to [mem 0xfffffffff8008000-0xfffffffff80080ff] (PCI address [0xf8008000-0xf80080ff])
[ 4.560000] pci 0000:00:02.1: BAR 0: assigned [io 0x0400-0x04ff]
[ 4.560000] pci 0000:00:02.1: BAR 0: set to [io 0x0400-0x04ff] (PCI address [0x400-0x4ff])
[ 4.840000] pci 0000:00:02.1: BAR 1: assigned [mem 0xfffffffff8009000-0xfffffffff80090ff]
[ 4.850000] pci 0000:00:02.1: BAR 1: set to [mem 0xfffffffff8009000-0xfffffffff80090ff] (PCI address [0xf8009000-0xf80090ff])
[ 4.980000] pci 0000:00:00.0: BAR 0: assigned [io 0x0080-0x00ff]
[ 4.980000] pci 0000:00:00.0: BAR 0: set to [io 0x0080-0x00ff] (PCI address [0x80-0xff])
[ 5.260000] pci 0000:00:04.0: BAR 1: assigned [io 0x0040-0x007f]
[ 5.260000] pci 0000:00:04.0: BAR 1: set to [io 0x0040-0x007f] (PCI address [0x40-0x7f])
[ 5.270000] pci 0000:00:05.0: BAR 1: assigned [io 0x0500-0x053f]
[ 5.540000] pci 0000:00:05.0: BAR 1: set to [io 0x0500-0x053f] (PCI address [0x500-0x53f])
[ 5.560000] Elroy version TR4.0 (0x5) found at 0xfffffffffed32000
[ 5.700000] Elroy version TR4.0 (0x5) found at 0xfffffffffed34000
[ 5.700000] NOTICE: Enabling PCI Arbitration
[ 5.730000] Elroy version TR4.0 (0x5) found at 0xfffffffffed36000
[ 5.840000] pci 0000:18:00.0: [1011:0019] type 0 class 0x000200
[ 5.840000] pci 0000:18:00.0: reg 10: [io 0xdc139c00-0xdc139c7f]
[ 5.840000] pci 0000:18:00.0: reg 14: [mem 0xd053f800-0xd053fbff]
[ 5.840000] pci 0000:18:00.0: reg 30: [mem 0xcefc0000-0xceffffff pref]
[ 5.840000] pci 0000:18:00.0: no compatible bridge window for [io 0xdc139c00-0xdc139c7f]
[ 5.960000] pci 0000:18:00.0: no compatible bridge window for [mem 0xffffffffd053f800-0xffffffffd053fbff]
[ 5.970000] pci 0000:18:00.0: no compatible bridge window for [mem 0xffffffffcefc0000-0xffffffffceffffff pref]
[ 6.100000] pci 0000:18:00.0: BAR 6: assigned [mem 0xfffffffff9800000-0xfffffffff983ffff pref]
[ 6.240000] pci 0000:18:00.0: BAR 1: assigned [mem 0xfffffffff9840000-0xfffffffff98403ff]
[ 6.380000] pci 0000:18:00.0: BAR 1: set to [mem 0xfffffffff9840000-0xfffffffff98403ff] (PCI address [0xf9840000-0xf98403ff])
[ 6.530000] pci 0000:18:00.0: BAR 0: assigned [io 0x30000-0x3007f]
[ 6.530000] pci 0000:18:00.0: BAR 0: set to [io 0x30000-0x3007f] (PCI address [0x0-0x7f])
[ 6.540000] Elroy version TR4.0 (0x5) found at 0xfffffffffed38000
[ 6.810000] NOTICE: Enabling PCI Arbitration
[ 6.830000] Elroy version TR4.0 (0x5) found at 0xfffffffffed3a000
[ 6.840000] NOTICE: Enabling PCI Arbitration
[ 6.860000] Elroy version TR4.0 (0x5) found at 0xfffffffffed3c000
[ 6.940000] NOTICE: Enabling PCI Arbitration
[ 6.970000] Elroy version TR4.0 (0x5) found at 0xfffffffffed3e000
[ 6.970000] NOTICE: Enabling PCI Arbitration
[ 7.000000] powersw: Soft power switch support not available.
[ 7.090000] bio: create slab <bio-0> at 0
[ 7.220000] vgaarb: loaded
[ 7.230000] SCSI subsystem initialized
[ 7.260000] NET: Registered protocol family 2
[ 7.270000] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 7.370000] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 7.530000] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 7.540000] TCP: Hash tables configured (established 262144 bind 65536)
[ 7.650000] TCP reno registered
[ 7.660000] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 7.790000] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 7.800000] NET: Registered protocol family 1
[ 7.930000] PCI: CLS 64 bytes
[ 7.930000] Chassis warnings not supported.
[ 7.940000] Performance monitoring counters enabled for Rhapsody DC- 440
[ 8.100000] VFS: Disk quotas dquot_6.5.2
[ 8.100000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 8.210000] msgmni has been set to 6022
[ 8.220000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 8.230000] io scheduler noop registered
[ 8.350000] io scheduler cfq registered (default)
[ 8.370000] PDC Stable Storage facility v0.30
[ 9.180000] STI GSC/PCI core graphics driver Version 0.9a
[ 9.180000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 9.200000] serial 0000:00:04.0: enabling device (0146 -> 0147)
[ 9.230000] 0000:00:04.0: ttyS0 at MMIO 0xfffffffff8000000 (irq = 70) is a 16550A
[ 9.240000] console [ttyS0] enabled, bootconsole disabled
[ 9.280000] 0000:00:04.0: ttyS1 at MMIO 0xfffffffff8000008 (irq = 70) is a 16550A
[ 9.320000] 0000:00:04.0: ttyS2 at MMIO 0xfffffffff8000010 (irq = 70) is a 16550A
[ 9.330000] serial 0000:00:05.0: enabling device (0000 -> 0003)
[ 9.340000] serial 0000:00:05.0: enabling SERR and PARITY (0003 -> 0143)
[ 9.380000] 0000:00:05.0: ttyS3 at MMIO 0xfffffffff8005000 (irq = 71) is a 16550A
[ 9.420000] Couldn't register serial port 0000:00:05.0: -28
[ 9.560000] sym53c8xx 0000:00:01.0: enabling device (0000 -> 0003)
[ 9.570000] sym53c8xx 0000:00:01.0: enabling SERR and PARITY (0003 -> 0143)
[ 9.770000] sym0: <896> rev 0x5 at pci 0000:00:01.0 irq 67
[ 9.780000] sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
[ 9.850000] sym0: SCSI BUS has been reset.
[ 9.860000] scsi0 : sym-2.2.3
[ 9.860000] sym53c8xx 0000:00:01.1: enabling device (0146 -> 0147)
[ 10.050000] sym1: <896> rev 0x5 at pci 0000:00:01.1 irq 68
[ 10.060000] sym1: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking
[ 10.130000] sym1: SCSI BUS has been reset.
[ 10.130000] scsi1 : sym-2.2.3
[ 10.130000] sym1: SCSI BUS mode change from SE to SE.
[ 10.130000] sym1: SCSI BUS has been reset.
[ 10.280000] sym53c8xx 0000:00:02.0: enabling device (0000 -> 0003)
[ 10.410000] sym53c8xx 0000:00:02.0: enabling SERR and PARITY (0003 -> 0143)
[ 10.620000] sym2: <875> rev 0x14 at pci 0000:00:02.0 irq 68
[ 10.710000] sym2: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking
[ 10.720000] sym2: SCSI BUS has been reset.
[ 10.720000] scsi2 : sym-2.2.3
[ 10.730000] sym53c8xx 0000:00:02.1: enabling device (0000 -> 0003)
[ 10.830000] sym53c8xx 0000:00:02.1: enabling SERR and PARITY (0003 -> 0143)
[ 10.910000] sym3: <875> rev 0x14 at pci 0000:00:02.1 irq 69
[ 11.060000] sym3: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking
[ 11.120000] sym3: SCSI BUS has been reset.
[ 11.120000] scsi3 : sym-2.2.3
[ 11.130000] mousedev: PS/2 mouse device common for all mice
[ 11.250000] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 11.270000] TCP cubic registered
[ 11.390000] NET: Registered protocol family 17
[ 11.400000] Registering the dns_resolver key type
[ 11.530000] scsi: waiting for bus probes to complete ...
[ 13.190000] scsi 1:0:0:0: Direct-Access SEAGATE ST136403LC HP01 PQ: 0 ANSI: 2
[ 13.200000] scsi target1:0:0: tagged command queuing enabled, command queue depth 16.
[ 13.220000] scsi target1:0:0: Beginning Domain Validation
[ 13.240000] scsi target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[ 13.250000] scsi target1:0:0: Domain Validation skipping write tests
[ 13.260000] scsi target1:0:0: Ending Domain Validation
[ 13.760000] scsi 2:0:0:0: Direct-Access SEAGATE ST136403LC HP01 PQ: 0 ANSI: 2
[ 13.760000] scsi target2:0:0: tagged command queuing enabled, command queue depth 16.
[ 13.770000] scsi target2:0:0: Beginning Domain Validation
[ 13.810000] scsi target2:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[ 13.820000] scsi target2:0:0: Domain Validation skipping write tests
[ 13.820000] scsi target2:0:0: Ending Domain Validation
[ 14.770000] scsi 3:0:2:0: CD-ROM HP DVD-ROM 304 2.00 PQ: 0 ANSI: 2
[ 14.780000] scsi target3:0:2: Beginning Domain Validation
[ 14.800000] scsi target3:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
[ 14.810000] scsi target3:0:2: Domain Validation skipping write tests
[ 14.820000] scsi target3:0:2: Ending Domain Validation
[ 17.480000] sd 1:0:0:0: [sda] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB)
[ 17.490000] sd 1:0:0:0: [sda] Write Protect is off
[ 17.510000] sd 1:0:0:0: [sda] Mode Sense: 9f 00 10 08
[ 17.510000] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 17.550000] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 17.570000] sd 1:0:0:0: [sda] Attached SCSI disk
[ 17.980000] sd 2:0:0:0: [sdb] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB)
[ 17.990000] sd 2:0:0:0: [sdb] Write Protect is off
[ 18.010000] sd 2:0:0:0: [sdb] Mode Sense: 9f 00 10 08
[ 18.010000] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 18.060000] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[ 18.070000] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 18.380000] rtc-generic rtc-generic: setting system clock to 2011-01-10 07:50:23 UTC (1294645823)
[ 18.470000] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 18.480000] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 18.500000] Freeing unused kernel memory: 172k freed
[ 18.500000] Write protecting the kernel read-only data: 652k
[ 21.030000] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 21.040000] tulip 0000:00:00.0: enabling device (0140 -> 0143)
[ 21.060000] tulip0: no phy info, aborting mtable build
[ 21.070000] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1
[ 21.090000] net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xfffffffff8006000, 00:10:83:fe:9c:b0, IRQ 66
[ 21.100000] tulip 0000:18:00.0: enabling device (0000 -> 0003)
[ 21.110000] tulip 0000:18:00.0: enabling SERR and PARITY (0003 -> 0143)
[ 21.140000] tulip1: EEPROM default media type Autosense
[ 21.150000] tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
[ 21.170000] tulip1: MII transceiver #1 config 3100 status 7849 advertising 0101
[ 21.180000] tulip1: Advertising 01e1 on PHY 1, previously advertising 0101
[ 21.190000] net eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0xfffffffff9840000, 00:10:83:fb:99:c0, IRQ 72
[ 21.650000] sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
[ 21.650000] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 21.670000] sr 3:0:2:0: Attached scsi CD-ROM sr0
[ 21.800000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 21.810000] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 21.820000] sr 3:0:2:0: Attached scsi generic sg2 type 5
[ 23.760000] Adding 1350652k swap on /dev/sda6. Priority:-1 extents:1 across:1350652k
[ 23.820000] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 24.360000] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 24.810000] loop: module loaded
[ 31.060000] net eth0: Setting full-duplex based on MII#1 link partner capability of 45e1
[ 31.360000] NET: Registered protocol family 10
[ 31.370000] lo: Disabled Privacy Extensions
[ 31.660000] sshd (924): /proc/924/oom_adj is deprecated, please use /proc/924/oom_score_adj instead.
--
Meelis Roos (mroos@xxxxxxxx)
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
