On Fri, Dec 25, 2009 at 04:46:55PM -0700, Grant Grundler wrote: > On Wed, Dec 23, 2009 at 09:19:19PM -0500, Carlos O'Donell wrote: > > When booting 2.6.32, my scsi drives don't come online, all I see during boot is: > > ~~~ > > sym53c8xx 0000:00:01.0: enabling device (0000 -> 0003) > > sym53c8xx 0000:00:01.0: enabling SERR and PARITY (0003 -> 0143) > > sym53c8xx 0000:00:01.1: enabling device (0000 -> 0003) > > sym53c8xx 0000:00:01.1: enabling SERR and PARITY (0003 -> 0143) > > sym53c8xx 0000:00:02.0: enabling device (0000 -> 0003) > > sym53c8xx 0000:00:02.0: enabling SERR and PARITY (0003 -> 0143) > > sym53c8xx 0000:00:02.1: enabling device (0146 -> 0147) > > ~~~ > > When booting 2.6.32-rc6 the drives come online right away after they > > are enabled. > > > > No amount of waiting helps. > > Do you have CONFIG_SCSI_SCAN_ASYNC=y ? > > If so, add CONFIG_SCSI_WAIT_SCAN=m or disable SCAN_ASYNC. > > While this should work, it sounds like it's not working. Huh? The wait scan module will wait for scans to complete. This sounds like the scans are never starting. -- Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step." -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
