On Mon, 2009-04-13 at 11:37 -0700, Matt Carlson wrote: > But that is exactly what the code is doing. tg3_nvram_read_be32() will > return the data in bytestream format. A memcpy() should be all that is > needed to transport the data to a different memory location. But not the one you've done. cpu_to_be32 is a nop pass through on our architecture, so tg3_nvram_read_be32 is equivalent to tg3_nvram_read on our architecture (i.e. identical to the code that was doing the read in 2.6.29). However, the memcpy is the wrong way around for us. If you look at an example, the original code said dev_addr[0] = hi >> 16; dev_addr[1] = hi >> 24 So MSB-1 and MSB. However, on a BE machine these are at offset one and zero from the start of the word. The replacement memcopy is: memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2) i.e. offset 3 and 4, which actually copies LSB-1 and LSB into there. You can follow similar logic to show that the lo copy is wrong too. Perhaps the fix is just to put the tg3_nvram_read() back as well as the original by loads? James -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
