On Mon, Apr 21, 2008 at 01:18:18AM +0200, Domenico Andreoli wrote: > Hi, > > as soon as I booted my dual PA8600 with 2.6.25 I got 1 CPU less. The > only other kernel I successfully used on that box is Debian's 2.6.22-3. Sorry, I can't reproduce this on my j6000. But there are some differences: 1) I'm using gcc 4.2 2) I'm testing 32-bit kernels. 3) j6k has 2GB of RAM (ie no RAM mapped above 4GB). 4) config file might be different in additional ways. I'll kick off a 64-bit build and test that as well. > Debian never built 2.6.23 for parisc, 2.6.24 was still hanging last > time I checked it, 2.6.25 did not even build until recent -rc. So I am > not in the best position to bisect. Given 32-bit works, we might be able to figure this out w/o bisect. ... > Linux version 2.6.25-02519-g3925e6f (cavok@ska) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #4 SMP Sun Apr 20 04:53:48 ... > model 9000/785/J5600 > Total Memory: 3840 MB Is this really 4GB with IO Hole? The memory behind the IO Hole should be visible at a phys addr above 4GB. ... > Found devices: > 1. Astro BC Runway Port at 0xfffffffffed00000 [10] { 12, 0x0, 0x582, 0x0000b } > 2. Elroy PCI Bridge at 0xfffffffffed30000 [10/0] { 13, 0x0, 0x782, 0x0000a } > 3. Elroy PCI Bridge at 0xfffffffffed32000 [10/1] { 13, 0x0, 0x782, 0x0000a } > 4. Elroy PCI Bridge at 0xfffffffffed34000 [10/2] { 13, 0x0, 0x782, 0x0000a } > 5. Elroy PCI Bridge at 0xfffffffffed38000 [10/4] { 13, 0x0, 0x782, 0x0000a } > 6. Elroy PCI Bridge at 0xfffffffffed3c000 [10/6] { 13, 0x0, 0x782, 0x0000a } > 7. Forte W+ 2w at 0xfffffffffffa0000 [32] { 0, 0x0, 0x5d1, 0x00004 } > 8. Forte W+ 2w at 0xfffffffffffa2000 [34] { 0, 0x0, 0x5d1, 0x00004 } > 9. Memory at 0xfffffffffed10200 [49] { 1, 0x0, 0x09e, 0x00009 } > Enabling regular chassis codes support v0.05 > Releasing cpu 1 now, hpa=fffffffffffa2000 > SMP: CPU:1 is stuck. BTW, I'm not sure this is a kernel problem. Do older kernels still work? > CPU(s): 2 x PA8600 (PCX-W+) at 552.000000 MHz > Setting cache flush threshold to f84c0 (1 CPUs online) ... FWIW, here's the equivalent output for the kernel I just booted on j6k: Linux version 2.6.25gcc42 (grundler@j6k) (gcc version 4.2.3 (Debian 4.2.3-3)) #1 SMP Sat Apr 19 16:56:57 PDT 2008 ... model 9000/785/J6000 Total Memory: 2048 MB ... Found devices: 1. Astro BC Runway Port at 0xfed00000 [10] { 12, 0x0, 0x582, 0x0000b } 2. Elroy PCI Bridge at 0xfed30000 [10/0] { 13, 0x0, 0x782, 0x0000a } 3. Elroy PCI Bridge at 0xfed34000 [10/2] { 13, 0x0, 0x782, 0x0000a } 4. Elroy PCI Bridge at 0xfed38000 [10/4] { 13, 0x0, 0x782, 0x0000a } 5. Elroy PCI Bridge at 0xfed3c000 [10/6] { 13, 0x0, 0x782, 0x0000a } 6. Duet W+ at 0xfffa0000 [32] { 0, 0x0, 0x5d4, 0x00004 } 7. Duet W+ at 0xfffa2000 [34] { 0, 0x0, 0x5d4, 0x00004 } 8. Memory at 0xfed10200 [49] { 1, 0x0, 0x00a, 0x00009 } Enabling regular chassis codes support v0.05 Releasing cpu 1 now, hpa=fffa2000 FP[1] enabled: Rev 1 Model 16 CPU(s): 2 x PA8600 (PCX-W+) at 552.000000 MHz Whole cache flush 240696 cycles, flushing 3936256 bytes 584013 cycles Setting cache flush threshold to 1140 (2 CPUs online) ... hth, grant -- To unsubscribe from this list: send the line "unsubscribe linux-parisc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html