Use the generic pci_enable_resources() instead of the arch-specific code.
Unlike this arch-specific code, the generic version:
- checks PCI_NUM_RESOURCES (11), not 6, resources
- skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
- skips ROM resources unless IORESOURCE_ROM_ENABLE is set
- checks for resource collisions with "!r->parent"
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Index: work8/arch/cris/arch-v32/drivers/pci/bios.c
===================================================================
--- work8.orig/arch/cris/arch-v32/drivers/pci/bios.c 2008-03-04 10:02:27.000000000 -0700
+++ work8/arch/cris/arch-v32/drivers/pci/bios.c 2008-03-04 10:02:47.000000000 -0700
@@ -55,38 +55,6 @@
}
}
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for(idx=0; idx<6; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1<<idx)))
- continue;
-
- r = &dev->resource[idx];
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (dev->resource[PCI_ROM_RESOURCE].start)
- cmd |= PCI_COMMAND_MEMORY;
- if (cmd != old_cmd) {
- printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
-
int pcibios_enable_irq(struct pci_dev *dev)
{
dev->irq = EXT_INTR_VECT;
@@ -97,7 +65,7 @@
{
int err;
- if ((err = pcibios_enable_resources(dev, mask)) < 0)
+ if ((err = pci_enable_resources(dev, mask)) < 0)
return err;
if (!dev->msi_enabled)
--
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
