Hi Pekon,
On Tue, Oct 15, 2013 at 06:49:49AM +0100, Pekon Gupta wrote:
> OMAP NAND driver currently supports multiple flavours of 1-bit Hamming
> ecc-scheme, like:
> - OMAP_ECC_HAMMING_CODE_DEFAULT
> 1-bit hamming ecc code using software library
> - OMAP_ECC_HAMMING_CODE_HW
> 1-bit hamming ecc-code using GPMC h/w engine
> - OMAP_ECC_HAMMING_CODE_HW_ROMCODE
> 1-bit hamming ecc-code using GPMC h/w engin with ecc-layout compatible
> to ROM code.
>
> This patch combines above multiple ecc-schemes into single implementation:
> - OMAP_ECC_HAM1_CODE_HW
> 1-bit hamming ecc-code using GPMC h/w engine with ROM-code compatible
> ecc-layout.
>
> Signed-off-by: Pekon Gupta <pekon@xxxxxx>
> Reviewed-by: Felipe Balbi <balbi@xxxxxx>
> Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 8 ++++----
> arch/arm/mach-omap2/board-flash.c | 2 +-
> arch/arm/mach-omap2/gpmc.c | 4 +---
> drivers/mtd/nand/omap2.c | 9 +++------
> include/linux/platform_data/mtd-nand-omap2.h | 6 +-----
> 5 files changed, 10 insertions(+), 19 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> index df338cb..25ee232 100644
> --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> @@ -22,10 +22,10 @@ Optional properties:
> width of 8 is assumed.
>
> - ti,nand-ecc-opt: A string setting the ECC layout to use. One of:
> -
> - "sw" Software method (default)
> - "hw" Hardware method
> - "hw-romcode" gpmc hamming mode method & romcode layout
> + "sw" <deprecated> use "ham1" instead
> + "hw" <deprecated> use "ham1" instead
> + "hw-romcode" <deprecated> use "ham1" instead
> + "ham1" 1-bit Hamming ecc code
> "bch4" 4-bit BCH ecc code
> "bch8" 8-bit BCH ecc code
[...]
> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
> index 579697a..c9fb353 100644
> --- a/arch/arm/mach-omap2/gpmc.c
> +++ b/arch/arm/mach-omap2/gpmc.c
> @@ -1342,9 +1342,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
> #ifdef CONFIG_MTD_NAND
>
> static const char * const nand_ecc_opts[] = {
> - [OMAP_ECC_HAMMING_CODE_DEFAULT] = "sw",
> - [OMAP_ECC_HAMMING_CODE_HW] = "hw",
> - [OMAP_ECC_HAMMING_CODE_HW_ROMCODE] = "hw-romcode",
> + [OMAP_ECC_HAM1_CODE_HW] = "ham1",
> [OMAP_ECC_BCH4_CODE_HW] = "bch4",
> [OMAP_ECC_BCH8_CODE_HW] = "bch8",
> };
As the parsing isn't updated until the next patch, doesn't this
temporarily break DTBs with the deprecated ti,nand-ecc-opt values?
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
