The HDMI IP on OMAP5/DRA7xx has very similar wrapper, PLL and PHY sub blocks found in OMAP4 DSS. However, the HDMI core IP(which implements the HDMI protocol) is completely new. Create a library for configuring the new HDMI core IP, make minor modifications in PLL and PHY. And finally, add a hdmi5 driver. This driver can eventually be merged with the hdmi4 driver such that both of them use the same driver, we would need to create core IP ops for that, we've left that for later. Archit Taneja (6): omapdss: hdmi: support larger register offsets for OMAP5 HDMI core omapdss: hdmi: Add initial OMAP5/DRA7x HDMI core IP library omapdss: hdmi phy: Incorporate changes for OMAP5/DRA7x omapdss: hdmi pll: Incorporate changes for OMAP5/DRA7x omapdss: hdmi: add OMAP5/DRA7x hdmi driver omapdss: hdmi4/hdmi5: set regulator voltage to required level drivers/video/omap2/dss/Kconfig | 10 + drivers/video/omap2/dss/Makefile | 2 + drivers/video/omap2/dss/core.c | 6 + drivers/video/omap2/dss/dss.h | 3 + drivers/video/omap2/dss/hdmi.h | 7 +- drivers/video/omap2/dss/hdmi4.c | 5 + drivers/video/omap2/dss/hdmi5.c | 704 ++++++++++++++++++++++++++++++ drivers/video/omap2/dss/hdmi5_core.c | 812 +++++++++++++++++++++++++++++++++++ drivers/video/omap2/dss/hdmi5_core.h | 298 +++++++++++++ drivers/video/omap2/dss/hdmi_phy.c | 94 +++- drivers/video/omap2/dss/hdmi_pll.c | 74 +++- drivers/video/omap2/dss/hdmi_wp.c | 2 +- 12 files changed, 2008 insertions(+), 9 deletions(-) create mode 100644 drivers/video/omap2/dss/hdmi5.c create mode 100644 drivers/video/omap2/dss/hdmi5_core.c create mode 100644 drivers/video/omap2/dss/hdmi5_core.h -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html