On Wed, Oct 16, 2013 at 04:18:22PM +0100, Balaji T K wrote:
> From: Sekhar Nori <nsekhar@xxxxxx>
>
> add generic "non-removable" binding support for omap_hsmmc
>
> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
> Signed-off-by: Balaji T K <balajitk@xxxxxx>
> ---
> .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 2 +-
> drivers/mmc/host/omap_hsmmc.c | 3 +++
> 2 files changed, 4 insertions(+), 1 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> index 8c8908a..3b95719 100644
> --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> @@ -17,7 +17,7 @@ Optional properties:
> ti,dual-volt: boolean, supports dual voltage cards
> <supply-name>-supply: phandle to the regulator device tree node
> "supply-name" examples are "vmmc", "vmmc_aux" etc
> -ti,non-removable: non-removable slot (like eMMC)
> +ti,non-removable: non-removable eMMC with always on vccq and configurable vcc
Why this change?
What do "vccq" and "vcc" correspond to? The regulators are called "vmmc"
and "vmmc_aux"...
Why is no mention of "non-removable" added, given that it's added to the
code?
Is one preferred over the other? That should be noted.
> ti,needs-special-reset: Requires a special softreset sequence
> ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
> dmas: List of DMA specifiers with the controller specific format
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 6ac63df..5992048 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -1738,6 +1738,9 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
> pdata->slots[0].switch_pin = cd_gpio;
> pdata->slots[0].gpio_wp = wp_gpio;
>
> + if (of_find_property(np, "non-removable", NULL)) {
> + pdata->slots[0].nonremovable = true;
> + }
This wasn't mentioned in the binding, and it seems to have different
semantics to "ti,non-removable". Why is it different?
> if (of_find_property(np, "ti,non-removable", NULL)) {
> pdata->slots[0].nonremovable = true;
> pdata->slots[0].no_regulator_off_init = true;
Cheers,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
