On 16:19-20131010, Kishon Vijay Abraham I wrote:
> smps10 should be enabled only in the case of host mode. So stop
> doing always_on, boot_on from smps10_out1. The driver will enable it in host
> mode.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
> arch/arm/boot/dts/omap5-uevm.dts | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
> index d784b3a..e06a04a 100644
> --- a/arch/arm/boot/dts/omap5-uevm.dts
> +++ b/arch/arm/boot/dts/omap5-uevm.dts
> @@ -334,8 +334,6 @@
> regulator-name = "smps10_out1";
> regulator-min-microvolt = <5000000>;
> regulator-max-microvolt = <5000000>;
> - regulator-always-on;
> - regulator-boot-on;
> };
>
> ldo1_reg: ldo1 {
> --
Always good to get rid of regulator-always-on. Thanks for it.
regulator-boot-on indicates that PMIC enables it by default as part of
OTP or some internal behavior -> Looking at the measurements done on
uEVM and OTP information -> regulator-boot-on should be kept here.
Hence Nak.
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
