From: Roger Quadros <rogerq@xxxxxx> USB_DPLL must be initialized and locked at boot so that USB modules can work. Signed-off-by: Roger Quadros <rogerq@xxxxxx> Signed-off-by: Tero Kristo <t-kristo@xxxxxx> Tested-by: Nishanth Menon <nm@xxxxxx> Acked-by: Tony Lindgren <tony@xxxxxxxxxxx> --- drivers/clk/ti/clk-54xx.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index 87e6ab3..ba2e387 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -19,6 +19,12 @@ #define OMAP5_DPLL_ABE_DEFFREQ 98304000 +/* + * OMAP543x TRM, section "3.6.3.9.5 DPLL_USB Preferred Settings" + * states it must be at 960MHz + */ +#define OMAP5_DPLL_USB_DEFFREQ 960000000 + static struct ti_dt_clk omap54xx_clks[] = { DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"), DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"), @@ -220,7 +226,7 @@ static struct ti_dt_clk omap54xx_clks[] = { int __init omap5xxx_dt_clk_init(void) { int rc; - struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck; + struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll; of_clk_init(NULL); @@ -237,5 +243,15 @@ int __init omap5xxx_dt_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + usb_dpll = clk_get_sys(NULL, "dpll_usb_ck"); + rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ); + if (rc) + pr_err("%s: failed to configure USB DPLL!\n", __func__); + + usb_dpll = clk_get_sys(NULL, "dpll_usb_m2_ck"); + rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ/2); + if (rc) + pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__); + return 0; } -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html