Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/07/2013 11:25 AM, Balaji T K wrote:
> Add mmc2 dt node to dra7-evm board
> and model eMMC vcc as fixed regulator.
> 
> Signed-off-by: Balaji T K <balajitk@xxxxxx>
> ---
> Rebase to for_3.13/dts
> and removed ti,non-removable
> 
>  arch/arm/boot/dts/dra7-evm.dts |   13 +++++++++++++
>  1 files changed, 13 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 65cd15a..3abf5f4 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -17,6 +17,13 @@
>  		device_type = "memory";
>  		reg = <0x80000000 0x60000000>; /* 1536 MB */
>  	};
> +
> +	mmc2_3v3: fixedregulator-mmc2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "mmc2_3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
>  };
>  
>  &dra7_pmx_core {
> @@ -256,3 +263,9 @@
>  	vmmc-supply = <&ldo1_reg>;
>  	bus-width = <4>;
>  };
> +
> +&mmc2 {
> +	status = "okay";
> +	vmmc-supply = <&mmc2_3v3>;
> +	bus-width = <8>;
> +};
> 
boot tested on DRA7-EVM
voltage rail is correct based on schematics(rev d1) too.
Reviewed-by: Nishanth Menon <nm@xxxxxx>
Tested-by: Nishanth Menon <nm@xxxxxx>

-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux