This patch fixes MCSPI FIFO buffer support when transmit-and-receive
(full duplex) mode is used. In this mode FIFO can be used for RX or
for TX or for both directions. If FIFO used for both directions the buffer
is split into two 32-byte buffers - one for each direction.
Also for full duplex mode both AEL and AFL need to be set in CHCONF0 register.
Signed-off-by: Illia Smyrnov <illia.smyrnov@xxxxxxxxxxxxxxx>
---
drivers/spi/spi-omap2-mcspi.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index ed4af47..32dca0c 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -276,7 +276,7 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
struct omap2_mcspi_cs *cs = spi->controller_state;
struct omap2_mcspi *mcspi;
unsigned int wcnt;
- int fifo_depth, bytes_per_word;
+ int max_fifo_depth, fifo_depth, bytes_per_word;
u32 chconf, xferlevel;
mcspi = spi_master_get_devdata(master);
@@ -287,7 +287,12 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
if (t->len % bytes_per_word != 0)
goto disable_fifo;
- fifo_depth = gcd(t->len, OMAP2_MCSPI_MAX_FIFODEPTH);
+ if (t->rx_buf != NULL && t->tx_buf != NULL)
+ max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH / 2;
+ else
+ max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
+
+ fifo_depth = gcd(t->len, max_fifo_depth);
if (fifo_depth < 2 || fifo_depth % bytes_per_word != 0)
goto disable_fifo;
@@ -299,7 +304,8 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
if (t->rx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFER;
xferlevel |= (fifo_depth - 1) << 8;
- } else {
+ }
+ if (t->tx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFET;
xferlevel |= fifo_depth - 1;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
