Do not reset GPIO0 at boot-up because GPIO0 is used on AM335x EVM-SK to control VTT regulators on DDR3. Without this EVM-SK boards fail to boot-up because of DDR3 corruption. Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> --- arch/arm/boot/dts/am335x-evmsk.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 4f339fa..0e44d29 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -419,3 +419,7 @@ phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii-txid"; }; + +&gpio0 { + ti,no-reset-on-init; +}; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html